+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

Mechanical Engineering Project Topics with available Materials

ABSTRACT This research is centered on the design and fabrication of copula furnace and atomizer for the production aluminium powder metal with the available material.0.4kg of refined coke was chosen as the basis for material and energy balance calculations and the design calculations performed from whose values are used to produce the design... Continue Reading
  • Type:Project
  • ID:MCE0412
  • Pages:108
  • Reference:YES
ABSTRACT Packaging of food which is viable means of  business opportunity has been exploited by individuals and corporate bodies for a very long time because the importance of packaging food products are very enormous ranging from protection of the product to preventing the food from spoiling. There is no way one can successfully go into business... Continue Reading
  • Type:Project
  • ID:MCE0411
  • Pages:15
  • Reference:YES
ABSTRACT An escalator is a moving staircase conveyor transport device for carrying people between floors of a building. The device consists of a motor-driven chain of individual, linked steps that move up or down on tracks, allowing the step treads to remain horizontal. Escalators are used around the world to move pedestrian traffic in places... Continue Reading
  • Type:Project
  • ID:MCE0410
  • Pages:52
  • Reference:YES
ABSTRACT Brazing alloys used for brazing the components of gas turbines and aerospace applications contain nickel as the base material. Nickel has highest affinity for oxygen. Incase if components are brazed using nickel as based filter material in air or atmosphere the braze joint will porous and braze strength is not achievable. To avoid the... Continue Reading
  • Type:Project
  • ID:MCE0409
  • Pages:68
  • Reference:YES
ABSTRACT The designed Air Driven Engine is an economic friendly engine which operates with the aid of a compressed air. In principle, an Air Driven Engine uses the expansion of compressed air to drive the pistons of an engine. An Air Driven Engine is a pneumatic actuator that creates useful work by expanding compressed air. There is no mixing of... Continue Reading
  • Type:Project
  • ID:MCE0408
  • Pages:44
  • Reference:YES
ABSTRACT: The designed air driven engine is an economic friendly engine which operates with the aid of a compressed air. in principle, an air driven engine uses the expansion of compressed air to drive the pistons of an engine. an air driven engine is a pneumatic actuator that creates useful work by expanding compressed air. there is no mixing of... Continue Reading
  • Type:Project
  • ID:MCE0407
  • Pages:44
  • Reference:YES
INTRODUCTION  The purpose of a control system is to produce a desired output. This output is usually specified by a command input, and is often a function of time. For simple applications in well structured situations, to control, and the controller must have the capability of reacting to disturbance, changes in its environment, and new input... Continue Reading
  • Type:Project
  • ID:MCE0406
  • Pages:41
  • Reference:YES
INTRODUCTION Communication means extending information form one person to another in a way in which it can be understood. Information and ideas in technical and scientific fields can very often be more easily communicated through sketching or instrument drawing and blueprint reading. Drawing involves describing the shape and size of an object. ... Continue Reading
  • Type:Project
  • ID:MCE0405
  • Pages:72
  • Reference:YES
ABSTRACT This project work-up deals on the design and construction of a single phase step down nations fermor, with raking IKVA, 240V/11OV, 80V 12U, 6V. It is a multi-circuit transformer that has one input as the primary and tappins to produce the output (secondary). It is considered as a single coil in series with the supply and a common coil to... Continue Reading
  • Type:Project
  • ID:MCE0404
  • Pages:38
  • Reference:YES
ABSTRACT The process involved in the design and fabrication of a creep material testing equipment ranges from carrying out the feasibility studies of the project to the designed and especially of ensuring its functionality.  Since it is used in the testing of failure of material under loading, different engineering principles employed in the... Continue Reading
  • Type:Project
  • ID:MCE0403
  • Pages:50
  • Reference:YES
ABSTRACT  The need for an authentic and reliable report relating to the design and construction of 80cm x 70cm x 50cm mobile deep freezer is inevitable. It should be a top priority of every individual in order to avoid huge expenditure in purchase to foreign ones. Its for this reason that this report is written for the benefit of those who are... Continue Reading
  • Type:Project
  • ID:MCE0402
  • Pages:42
  • Reference:YES
ABSTRACT   This work is aimed at the removal of hazardous gases and dust particles, air channeling etc. This work is aimed at achieving industrial waste control therein safe – guarding the immediate environment.  Chapter one accounts for the introduction of the project. Chapter two involves literature review in the origin, types and... Continue Reading
  • Type:Project
  • ID:MCE0401
  • Pages:34
  • Reference:YES
ABSTRACT Despite all attempt of the federal government to have not only an uninterrupted power supply for all cities in Nigeria, but a voltage that is inconformity with the recommended 220/230v for domestic consumption for example.  The NEPA Plc is facing some difficulties in generating, transmitting and distributing the required voltage... Continue Reading
  • Type:Project
  • ID:MCE0400
  • Pages:44
  • Reference:YES
ABSTRACT The intruder alarm system was designed and build in order to let the industrial and commercial company know how important alarm system is all about. These can be of Good help if the intruder will look through this project and support for the development of this project as to let the Federal Government know that the young engineering of... Continue Reading
  • Type:Project
  • ID:MCE0399
  • Pages:41
  • Reference:YES
ABSTRACT This project is he design and construction of a voltage inverter system with trickle charging system. This device is design to provide power supply for the need of offices, household etc. In absence of NEPA power supply. It would also prevent harm to our appliances caused by power holding company LTD (NEPA) Random power outage . TABLE OF... Continue Reading
  • Type:Project
  • ID:MCE0398
  • Pages:39
  • Reference:YES
ABSTRACT  Mechanical Engineering Department of the named Institute has many non – operational malhiues. Sequel to the fact, maintenance was poorly excuted which resulted to the breakdown deep freezer. Quality and effectiveness of machine maintenance were well observed. Also, a minimized maintenance and a highly successful  repair was adopted.... Continue Reading
  • Type:Project
  • ID:MCE0397
  • Pages:39
  • Reference:YES
INTRODUCTION Power amplifier is an electronic device, which is used to increase sound energy.  In other words, the final stage which must driven a given load e.g mechanical indicator, a loudspeaker cathode roy tade, magnetic deflection coil, a transmitting accrual of a communication network.  Power amplifier is also used in regulation power... Continue Reading
  • Type:Project
  • ID:MCE0396
  • Pages:34
  • Reference:YES
ABSTRACT This work was centered on the Design and implementation of a simple scientific calculator for education organization. The  study traced calculator system as a tool to completely change mathematical knowledge and sophisticated problems solving strategies had advanced the field of simulated engine in mathematic. This project work also... Continue Reading
  • Type:Project
  • ID:MCE0395
  • Pages:47
  • Reference:YES
ABSTRACT In this project (3) alternative design solutions were considered for the locally made electric run. The authors utilize the available local raw demerits of each alternative with respect to the considered group were discussed and the solutions of the alternative that best satisfied the limitations was selected for production. Material... Continue Reading
  • Type:Project
  • ID:MCE0394
  • Pages:42
  • Reference:YES
ABSTRACT In all types of air –conditioning work a through knowledge of basic principal is varying important. The report of the project “re pair and rehabilitation of a faulty Air–conditioner” serves as guide to project implementation. It explains and illustrates the import principle of operation and various maintenance procedures in an... Continue Reading
  • Type:Project
  • ID:MCE0393
  • Pages:37
  • Reference:YES
ABSTRACT This write up outlines the design and fabrication of  wood lathe machine. This type of lathe is capable of creating different wood designs using the cheapest available material and method. To achieve functional and efficient wood lathe of  this kind, we analyzed as well as synthesized the different possible design solutions and... Continue Reading
  • Type:Project
  • ID:MCE0392
  • Pages:44
  • Reference:YES
LETTER PRESS PRINTING 1.1THE BASIC PRINCIPLE: Letterpress is a highly versatile printing process. It is adaptable to both short and long printing runs, from a few hundreds to several millions of printed impressions. In letterpress printing the image area of the printing surface stands in relief, raised above the surrounding non-image areas. Ink is... Continue Reading
  • Type:Project
  • ID:MCE0391
  • Pages:51
  • Reference:YES
ABSTRACT Description of a system and peripherals or devices in a computer system in which the operating of such devices is under control of the central processing unit is termed on-line.  Because of the efficiency and fast services, this project is equally aimed at creating a computer based lottery which allows entire to be sold over the phone,... Continue Reading
  • Type:Project
  • ID:MCE0390
  • Pages:46
  • Reference:YES
ABSTRACT The ill treatment that take place in our motor vehicle Drivers licensing office today, one have to wait endlessly in order to get his driver’s licensing or renew his driver license and so on. This is a problem that is experienced daily, which robs the government a huge sum of money through fraudulent means.  Being a system run... Continue Reading
  • Type:Project
  • ID:MCE0389
  • Pages:68
  • Reference:YES
ABSTRACT Voting is a very important process in the Nigerian political system.  It is one of the means and most effective method of ensuring a legitimate government through popular participation.  To enthrone sound democracy and stability in the political system of the Enugu state a system of rig-free voting has to be put in place. The system... Continue Reading
  • Type:Project
  • ID:MCE0388
  • Pages:74
  • Reference:YES
ABSTRACT The magical impact of computer has made enormous contribution to all aspect of the society people can now do things easily unlike in the past. Computers have lesson human activities (effort) in their day to day life, by reducing both human labour and time in solving their problem which are both numerous / unlimited. The introduction of... Continue Reading
  • Type:Project
  • ID:MCE0387
  • Pages:44
  • Reference:YES
INTRODUCTION Each machine consists in principle of three basic parts: a motor or another prime mover (that sets the machine in motion), an actuating mechanism (which is directly doing the needed work: digs a ditch, weaves cloth, peels potatoes, propels a ship, and so on), and a transmission that connects the first two parts. Sometimes, the... Continue Reading
  • Type:Project
  • ID:MCE0386
  • Pages:20
  • Reference:YES
ABSTRACT The precise content of this project was to construct a model shell and tube heat  exchanger.  The material for construction of this project (equipment) and their dimensions are as follows:  1.500mm length of a tube bundle  2.20mm diameter of the tube bundle  3.650mm length of the shell  4.120mm diameter of the shell  5.70mm length... Continue Reading
  • Type:Project
  • ID:MCE0385
  • Pages:58
  • Reference:YES
INTRODUCTION   REFRIGERATION Refrigeration is a branch of science that deals with the process of removing heat from a substance or space in order to make it cooler. Refrigerator is defined as a device that is used in cooling the internal temperature below the room temperature (that is between 250C to 300C). Generally, however, for a space or... Continue Reading
  • Type:Project
  • ID:MCE0384
  • Pages:35
  • Reference:YES
ABSTRACT In the mechanical engineering department of institute of management and technology there are many machines but it is not all that is functioning well. This may airless as a   result of lack of maintenance which is a prove in the breakdown of the air conditioner. The quality and effectiveness of materials were mated very well as referred... Continue Reading
  • Type:Project
  • ID:MCE0383
  • Pages:35
  • Reference:YES
ABSTRACT   Knowledge could only be obtained successively by the use of books for research. This can be achieved only by preserving books already purchased. As a result we fabricate a metallic shelf made up of metallic sheet; precisely mild steel sheets. The mild steel used for the fabrication of the shelf is 1.5mm (16gauge) mild steel.  The... Continue Reading
  • Type:Project
  • ID:MCE0382
  • Pages:24
  • Reference:YES
ABSTRACT Most Stock  Marketing Report, production, and manufacturing firms have the basic problem of information flow between the various departments within the organization. This research is intended to highlight the role of a computerized Stock  Marketing Report information system in NSEC Compare to the manual system of Stock  Marketing... Continue Reading
  • Type:Project
  • ID:MCE0381
  • Pages:53
  • Reference:YES
ABSTRACT A Budget being the planning of how to spend revenues and incoming capitals so this makes is necessary to make sure that it is done with extra care. Budgets and the methods of preparing a good one has been a problem to most organization both private and government, the implementation of a faulty budget has brought man companies to a close... Continue Reading
  • Type:Project
  • ID:MCE0380
  • Pages:53
  • Reference:YES
ABSTRACT The importance of financial accounting is gradually being recognized as germane to prudent management of any business firm.  This has necessitated the need for the computerization of structured operations of the financial managers structured operations are known with certainly for instance, the computation and decisions based on... Continue Reading
  • Type:Project
  • ID:MCE0379
  • Pages:54
  • Reference:YES
ABSTRACT A workshop cupboard is a facility designed from mild steel for the storage of various materials, like book material and non-book materials e.g. workshop tools, labouratory wares and reagents, etc; after operations in a chemical labouratory, mechanical workshop, or else where. The construction of a workshop cupboard requires the... Continue Reading
  • Type:Project
  • ID:MCE0378
  • Pages:69
  • Reference:YES
ABSTRACT It views of the smoke released when using a firewood for baking cakes, bread, preserve fresh fishes and warming or remove ice form frozen food by some mothers at home, restaurant, fast food shops etc. We discovered the need to design and fabricated kerosene pressurized Oven that will reduce the amount of smoke emitting into the atmosphere... Continue Reading
  • Type:Project
  • ID:MCE0377
  • Pages:62
  • Reference:YES
ABSTRACT The aim of this project is to capture the utilization of pumps for various uses and to maximize the principle of selection of water pumps through the application and pump selection for specific uses our society will transformed wholestically to an industrious nation in the clean water supply for supply for domestic, industrial and down... Continue Reading
  • Type:Project
  • ID:MCE0376
  • Pages:48
  • Reference:YES
ABSTRACT This research work was carried out to evaluate the different methods of corrosion prevention, control and monitoring. In the course of the research many scholarly articles on the subject matter were reviewed from which the researcher got lot information concerning the topic at hand. Thus making the research work a reliable source of... Continue Reading
  • Type:Project
  • ID:MCE0375
  • Pages:50
  • Reference:YES
ABSTRACT  The working principles of a window air conditioning system was described with the mode of operationg of the refrigeration cycle and its construcion.  The aim of every window Air conditioning system is to achieve cooling.  Change of temperature system were discussed with the methods of improving the performance of th window Air... Continue Reading
  • Type:Project
  • ID:MCE0374
  • Pages:94
  • Reference:YES
ABSTRACT The project work Rehabilitation and Repair of A Window Unit Air Conditioner exposes us to the internal working mechanism of the window unit a.c.  The working principles component unit, faults and effective repairs carried out to ensure the serviceability of the broken down unit. It buttress the need for routine maintenance, and effective... Continue Reading
  • Type:Project
  • ID:MCE0373
  • Pages:32
  • Reference:YES
ABSTRACT In this project, three (3) alternative design solutions were considered for the camp-bed.  The authors utilize the local raw materials (with cost consideration) for the comments.  The merits and demerits of each of the alternative with respect to the considered grip were also discussed and the solutions of the alternatives that best... Continue Reading
  • Type:Project
  • ID:MCE0372
  • Pages:29
  • Reference:YES
ABSTRACT Conveying goods from one place to another via trucks has been a long-held practice because of its usefulness.  There are different types of trucks that are available in this regard such as ; two axle, three axle, four axle trucks etc and each with its unique functionality. Businesses relying on the movement of bulky raw materials and... Continue Reading
  • Type:Project
  • ID:MCE0371
  • Pages:24
  • Reference:YES
ABSTRACT During forging or furnace operation, air is the utility that should be available at all time in order to ensure a smooth and standardized operation. Supplying air manually will reduce productivity and more man hour to accomplish a given task.  Thus, an electric blower was designed in this regard with an efficient electric motor as the... Continue Reading
  • Type:Project
  • ID:MCE0370
  • Pages:49
  • Reference:YES
ABSTRACT In recent times, most of the household appliances are using electric power and as such, electricity shortage has become a major problem throughout the world. Ceiling fan is one of such appliances that consume electric power. The best way to minimize the power consumption of the ceiling fan is to reduce the weight of the ceiling fan blade.... Continue Reading
  • Type:Project
  • ID:MCE0369
  • Pages:35
  • Reference:YES
ABSTRACT Packaging of food which is viable means of  business opportunity has been exploited by individuals and corporate bodies for a very long time because the importance of packaging food products are very enormous ranging from protection of the product to preventing the food from spoiling. There is no way one can successfully go into business... Continue Reading
  • Type:Project
  • ID:MCE0368
  • Pages:34
  • Reference:YES
ABSTRACT Wheelbarrow is a simple machine, which belong to the second-class lever. This is because the load or resistance is placed between the effort and the fulcrum. It is used in many areas of work to convey loads that are too heavy or bulky to be carried by hand. Wheelbarrow can be used as farm equipment, industrial equipment among others.... Continue Reading
  • Type:Project
  • ID:MCE0367
  • Pages:51
  • Reference:YES
ABSTRACT When it comes to construction projects, landscaping work, and gardening, you need the right kind of equipment to finish tasks speedily and easily. One piece of equipment you would need is a motorised wheelbarrow. This is intended to carry bulky materials and heavy loads. There are a lot of equipments that can be used these days for... Continue Reading
  • Type:Project
  • ID:MCE0366
  • Pages:60
  • Reference:YES
ABSTRACT This  wrote  up is a detail of the processes for the physical realization of the  design and construction  of mobile deep freezer. It is divided into chapters which discussed expensively the practical  refrigeration cycle  with  rull attention  given to design factors working principals and choice of material.  Also considered... Continue Reading
  • Type:Project
  • ID:MCE0365
  • Pages:36
  • Reference:YES
ABSTRACT In the society at large Technology is fast replacing the crude method of carrying out work and has been making room for employment. Besides, it has also caught the attention of the youths who will prefer to work in a company with technological operations than one with man-power operations. This project can be used to convey materials... Continue Reading
  • Type:Project
  • ID:MCE0364
  • Pages:35
  • Reference:YES
INTRODUCTION   REFRIGERATION Refrigeration is a branch of science that deals with the process of removing heat from a substance or space in order to make it cooler. Refrigerator is defined as a device that is used in cooling the internal temperature below the room temperature (that is between 250C to 300C). Generally, however, for a space or... Continue Reading
  • Type:Project
  • ID:MCE0363
  • Pages:36
  • Reference:YES
ABSTRACT This Nylon sealing and cutting machine has an added advantage of making 800 sealed bags per hour.  The constructional machines were sourced locally. The machine can cut and seal Nylon at a affordable cost.  The constructional size of 31 cm x 7.5cm x 12.4 which comprises the following component.  The sealing and cutting filament, the... Continue Reading
  • Type:Project
  • ID:MCE0362
  • Pages:23
  • Reference:YES
INTRODUCTION  The production of bench shearing machines to reduce, alleviate and probably eliminate suffering, time, money, wastage of material and more especially the need for technological break through and self reliance has been a major concern of the federal government. Metal shearing and shaping has been a tiring problem in the society from... Continue Reading
  • Type:Project
  • ID:MCE0361
  • Pages:28
  • Reference:YES
INTRODUCTION This project of fabrication of single face pressurized kerosene cooker is a copied design. It is a manually operated type of stove, which has the capacity of supplying heat energy at high and low temperature. The type of stove so designed here do the industrial type with one burner.  Since the introduction of this pressurized... Continue Reading
  • Type:Project
  • ID:MCE0360
  • Pages:21
  • Reference:YES
ABSTRACT This project has been design and fabricated with special economical needs for small scale baking industries, wholesalers and distributors who impact this type of baking even from outside the country to su0pply the customers. And in view of the scarcity and high cost of gas and electricity in the country and also smoke release when using... Continue Reading
  • Type:Project
  • ID:MCE0359
  • Pages:55
  • Reference:YES
ABSTRACT The aim of this paper is to get a best performance by an ice block/cube making machine of refrigeration with suitable time. In present day hotels, resort and bar require more ice in very less time. So, to solve this problem and control the required time to ice formation, we construct an ice cube making machine. In present days, in market... Continue Reading
  • Type:Project
  • ID:MCE0358
  • Pages:33
  • Reference:YES
ABSTRACT Among various efforts pursued to produce fuel efficient vehicles, light weight engineering (i.e. the use of low-density structurally-efficient materials, the application of advanced manufacturing and joining technologies and the design of highly-integrated, multi-functional components/sub-assemblies) plays a prominent role. In the present... Continue Reading
  • Type:Project
  • ID:MCE0357
  • Pages:91
  • Reference:YES
 INTRODUCTION Nigeria is an agricultural nation. Melon (Citrullus Vulgaris) is widely cultivated in Nigeria, among other seedlings during the planting season yearly. Several tones of the melon seeds are gathered each harvesting period but only very low percentage of the total harvest are dried by atmospheric draught and bagged for storage. High... Continue Reading
  • Type:Project
  • ID:MCE0356
  • Pages:63
  • Reference:YES
ABSTRACT This Machine is design and fabricate as a prerequisite for the award of a Higher National Diploma. We sketch different designs which after consideration of many factors like the machine efficiency, the cost of materials e.t.c before we finally embark on this machine. The machine major component are the shaft, the inner barrel, the outer... Continue Reading
  • Type:Project
  • ID:MCE0355
  • Pages:51
  • Reference:YES
ABSTRACT The project work titled Design and construction of a metal detector. When fully design and implemented would be able to detect any metallic material that is passing or coming close. This function would serve as a security check for dangerous metallic material as an alarm. Going by the sophisticated means of armed rubbers adopt these days... Continue Reading
  • Type:Project
  • ID:MCE0354
  • Pages:85
  • Reference:YES
Company background and overview Anbessa City Bus Service Enterprise is the largest City Public Transportation Company in  Ethiopia established immediately after the Italian invasion in 1943 by collecting old vehicles  and garage equipment from the invader. At the time its name was Public Transport and guided  by Italians and other foreigners.... Continue Reading
  • Type:Project
  • ID:MCE0353
  • Pages:72
  • Reference:YES
ABSTRACT When it comes to construction projects, landscaping work, and gardening, you need the right kind of equipment to finish tasks speedily and easily. One piece of equipment you would need is a motorised wheelbarrow. This is intended to carry bulky materials and heavy loads. There are a lot of equipments that can be used these days for... Continue Reading
  • Type:Project
  • ID:MCE0352
  • Pages:60
  • Reference:YES
CHAPTER ONE 1.0 INTRODUCTION 1.1 Statement of the Problems 1.2 Objectives of the Study 1.3 Scope & Limitations of the study 1.4 Specifications the following abbreviations are used CHAPTER TWO LITERATURE REVIEW CHAPTER THREE MATERIALS AND METHOD CHAPTER FOUR DESIGN AND IMPLEMENTATION CHAPTER FIVE SUMMARY, CONCLUSION AND RECOMMENDATION... Continue Reading
  • Type:Project
  • ID:MCE0351
  • Pages:61
  • Reference:YES
ABSTRACT A 1.25KVA (2000W) inverter generator was designed, constructed and certified Ok. In this project, the design of the inverter generator  is aimed at satisfying the need of converting, a D.C source of supply (12v battery) to an A.C voltage of 220v. The inverter range of output is between 200-220v. Since the inverter was designed to step-up... Continue Reading
  • Type:Project
  • ID:MCE0350
  • Pages:72
  • Reference:YES
ABSTRACT The main objective of this project was to ensure a proper security to car being parked in garage against theft or an intruder. The circuit uses three NE555 timers; one of the NE555 was wired as a monostable oscillator and remaining two were wired as tone generator and amplified to obtain a maximum audible sound. However, pin 2 of the... Continue Reading
  • Type:Project
  • ID:MCE0349
  • Pages:73
  • Reference:YES
ABSTRACT When it comes to construction projects, landscaping work, and gardening, you need the right kind of equipment to finish tasks speedily and easily. One piece of equipment you would need is a motorised wheelbarrow. This is intended to carry bulky materials and heavy loads. There are a lot of equipments that can be used these days for... Continue Reading
  • Type:Project
  • ID:MCE0348
  • Pages:61
  • Reference:YES
ABSTRACT  This project is concerned with the fabrication of as a single face pressurized kerosene cooker. The report shows the possible way in which the above mentioned can be designed, fabricated and maintained.  Its also shows the strength and properties of the materials it is made of.  Defects of the equipment can come through inability to... Continue Reading
  • Type:Project
  • ID:MCE0347
  • Pages:25
  • Reference:YES
ABSTRACT This work on the construction and fabrication of a mobile deep freezer revolves around the concept of refrigeration. The concept of refrigeration revolves around the reverse Carnot cycle. This is  a cycle involving isentropic expansion (at the throttling valve), isothermal expansion (at the evaporator), isentropic compression (at the... Continue Reading
  • Type:Project
  • ID:MCE0346
  • Pages:81
  • Reference:YES
ABSTRACT  Mechanical Engineering Department of the named Institute has many non – operational malhiues. Sequel to the fact, maintenance was poorly excuted which resulted to the breakdown deep freezer. Quality and effectiveness of machine maintenance were well observed. Also, a minimized maintenance and a highly successful  repair was... Continue Reading
  • Type:Project
  • ID:MCE0345
  • Pages:39
  • Reference:YES
ABSTRACT Books are used recoding of what is happening or event that has already taken place which can be storing information it is useful and for the information that such books contained not to cost it support to be properly kept and these can be done when those books are kept in a cool dry place and a place free from rodents and insects... Continue Reading
  • Type:Project
  • ID:MCE0344
  • Pages:21
  • Reference:YES
ABSTRACT This work is an attempt evolve a quicker and easier method of achieving Transportation. This will no doubt save considering human labour and time wasted involved in traditional manual method of transportation. To achieve this, preliminary experiment was first carried out to determine the optimum speed of the motor vehicle. Various design... Continue Reading
  • Type:Project
  • ID:MCE0343
  • Pages:51
  • Reference:YES
PREFACE The electrical popcorn machine is a device for preparing especial popcorn for the human consumption. The device in produced to help the masses to be self valiance in this are of down trodden economy. This project work is divided into five chapters, chapter one; the introduction discusses the relevance of the project work, problems it is... Continue Reading
  • Type:Project
  • ID:MCE0342
  • Pages:32
  • Reference:YES
ABSTRACT The aim of this project is to design and fabricate a bench shearing machine which can complete favorably with the imported ones. this machine is designed and fabricate, using our cheap and available materials. Some qualities such as durability, reliability and portability are guaranteed. It is functional and can cut or shear a metal of up... Continue Reading
  • Type:Project
  • ID:MCE0341
  • Pages:39
  • Reference:YES
ABSTRACT This Nylon sealing and cutting machine has an added advantage of making 800 sealed bags per hour.  The constructional machines were sourced locally. The machine can cut and seal Nylon at a affordable cost.  The constructional size of 31 cm x 7.5cm x 12.4 which comprises the following component.  The sealing and cutting filament, the... Continue Reading
  • Type:Project
  • ID:MCE0340
  • Pages:23
  • Reference:YES
ABSTRACT This report covers all activities candied out to rehabilitate a faulty refrigerator. First and foremost, we diagnosed the faulty refrigerator using the basic instruments to know the faults. After which we bought the necessary standard items that caused the fault.  We then started work on it by replacing necessary instruments.  We... Continue Reading
  • Type:Project
  • ID:MCE0339
  • Pages:34
  • Reference:YES
ABSTRACTS The fabrication of a pressurized kerosene oven. This project has been fabricated with special economical needs for the small scale baking industries, wholesalers and distributors who import this type of baking oven from outside the country to supply the customers who wish to use it or those that cannot after gas oven can be used in... Continue Reading
  • Type:Project
  • ID:MCE0338
  • Pages:39
  • Reference:YES
ABSTRACT FLUSHING OF THE CONDENSER The refrigerant gas let into the condenser through the compressor and the vacuum pump was connected to the condenser to absorb dirty. REFILLING OF GAS INTO THE COMPRESSOR Gas was refilled into the compressor due to shortage of gas and it was filled inside the charging value and refrigerant. CHANGING OF DRIVER... Continue Reading
  • Type:Project
  • ID:MCE0337
  • Pages:20
  • Reference:YES
ABSTRACT The project is about fabrication of wheel-barrow, which is fabricated in Mechanical Engineering workshop in Institute of Management and Technology, Enugu. The report comprises seven chapters. Chapter one is about the introduction of the wheel. Chapter two is about the literature review, chapter three is about the material selection and... Continue Reading
  • Type:Project
  • ID:MCE0336
  • Pages:27
  • Reference:YES
ABSTRACT  Knowledge could only be obtained successively by the use of books for research. This can be achieved only by preserving books already purchased. As a result we fabricate a metallic shelf made up of metallic sheet. Precisely mild steel sheets. The mild steel used for the fabrication of the shelf is 1.5mm (16gauge) mild steel.  The shelf... Continue Reading
  • Type:Project
  • ID:MCE0335
  • Pages:26
  • Reference:YES
ABSTRACT This project aims at designing and constructing a book metallic shelf hose capability will be to contain different standard sizes of books at minimum paces. What is taken into consideration in this project are the cost of its production, processes, and maintenance. Other considerable factors are the functional aspect of the... Continue Reading
  • Type:Project
  • ID:MCE0334
  • Pages:37
  • Reference:YES
ABSTRACT In the society at large Technology is fast replacing the crude method of carrying out work and has been making room for employment. Besides, it has also caught the attention of the youths who will prefer to work in a company with technological operations than one with man-power operations. This project can be used to convey materials... Continue Reading
  • Type:Project
  • ID:MCE0333
  • Pages:46
  • Reference:YES
ABSTRACT  Construction of a potable electric operated motor vehicle for long Volvo Bus. In this project involves the knowledge of mechanical engineering workshop technology and engineering material science and strength. This was exactly what we were taught. We contracted the electric car with the actual dimension of long Volvo bus(Ml-) got from... Continue Reading
  • Type:Project
  • ID:MCE0332
  • Pages:28
  • Reference:YES
ABSTRACT  This write up is a detain of the process and formulation of plan for the physical realization of the construction of a mobile cooking system. It as divided into chapters, which discussed extensively the practical refrigerator cycle with attention given to constriction factors, working principle and choice of materials. The method used... Continue Reading
  • Type:Project
  • ID:MCE0331
  • Pages:43
  • Reference:YES
PREFACE Our purpose of embarking on the construction of a project of this kind to present a very vivid and understandable fact that if given the necessary supports, that we the youths and engineers in potentials can more this country forward as regards to technical know how. Such a bird eye view right from time immemorial had proved that lot of... Continue Reading
  • Type:Project
  • ID:MCE0330
  • Pages:31
  • Reference:YES
ABSTRACT An electric popcorn machine is machine that is used to popcorn for human consumption. It uses electricity as it sources of energy, transfer it energy, that is used to pop the Corn. Also it has a stirrer, which rotate due to the convection of electrical energy from the source to mechanical energy in the motor, the stirrer tons the corn so... Continue Reading
  • Type:Project
  • ID:MCE0329
  • Pages:26
  • Reference:YES
ABSTRACT Parameters on which clear prints depends were comprehensively investigated.  The study revealed that clear print depends on the impressed pressure the working temperature and the gold foil print paper life expectancy. Also studies were he manner of dependence of these parameters on prints impressed  on sheets of varied thickness.  The... Continue Reading
  • Type:Project
  • ID:MCE0328
  • Pages:55
  • Reference:YES
ABSTRACT. A machine for corn Sheller is highly and greatly needed for consistence of usage of corn in local and international levels. With regards to this indispensable need, a corn-shelling machine is designed which operates to remove the corn grains and leaving the cobs intact. In attainment to this design objective and aims, a proper... Continue Reading
  • Type:Project
  • ID:MCE0327
  • Pages:48
  • Reference:YES
ABSTRACT The aim of the project is to construct a domestic grain grinding machine to be powered by electric motor through pulley and belt transmission. The project is to perform mostly blending and grinding on grains e.g beans, maize, melon, millet and such other food crops. In construction of the project, there are various factors that is being... Continue Reading
  • Type:Project
  • ID:MCE0326
  • Pages:39
  • Reference:YES
ABSTRACT The candle molding machine is a vital device which cannot be done without, in any nation. This is because of the indispensable role candle plays, especially when there is no either source of light. In order to enhance adequate supply to both urban and rural consumers, the production of a candle molding machine is important. The major... Continue Reading
  • Type:Project
  • ID:MCE0325
  • Pages:54
  • Reference:YES
ABSTRACT Stop clocks are devices for indicating time duration for the occurrence of two events after a passage of time. They are usually powered by batteries and they measure time in unit of seconds. Most clocks stop working as a result of the inability of the main spring to make a complete revolution. Also problems that do arise in clocks and... Continue Reading
  • Type:Project
  • ID:MCE0324
  • Pages:27
  • Reference:YES
ABSTRACT The project work “Construction of standard steel cupboard†was constructed at the mechanical workshop. During the construction, various hand and machinery tools (equipment) such as electric welding machine, hammers, guillote, folding machine, spraying machine, milling machine, steel rule, hard saw, center punch, scribbers,... Continue Reading
  • Type:Project
  • ID:MCE0323
  • Pages:35
  • Reference:YES
ABSTRACT The sets of seizes with shocker which was fabricated and assembled in the chemical engineering pilot plant was aimed at providing the students with a machine that will aid them in practical involving the separation of solid particles. Besides this, it was also fabricated sizes or diameter of the solid particles of a substance by allowing... Continue Reading
  • Type:Project
  • ID:MCE0322
  • Pages:43
  • Reference:YES
ABSTRACT The aim of this project was to construct shell and tube heat exchanger with fixed boundless. A heat exchanger that would cool 5 x 5 x 10 – 3 kg/s of steam at a calculated heat load of 152 – 395/S was fabricated. The steam is to reach the heat exchanger from a distillation column at a temperature of 300k. The specification of... Continue Reading
  • Type:Project
  • ID:MCE0321
  • Pages:43
  • Reference:YES
ABSTRACT Propeller agitator is a specialized of various types of substances.  It consists of three basic components which are the shaft, blade and the vessel. In the construction, mild steel was chosen due to it’s inherent properties.  After the procurement, the following constructional operations were carried out which included marking... Continue Reading
  • Type:Project
  • ID:MCE0320
  • Pages:44
  • Reference:YES
ABSTRACT This is an abstract on the construction of a packed distillation column. A packed distillation column is used in the separating process distillation that is the separation of two miscible liquids.  It was constructed by marking out the dimension of the column, condenser, pot, using steel rule scriber, oxyacetylene flame was used for... Continue Reading
  • Type:Project
  • ID:MCE0319
  • Pages:59
  • Reference:YES
ABSTRACT Wheelbarrow is a simple machine, which belong to the second-class lever. This is because the load or resistance is placed between the effort and the fulcrum. It is used in many areas of work to convey loads that are too heavy or bulky to be carried by hand. Wheelbarrow can be used as farm equipment, industrial equipment among others.... Continue Reading
  • Type:Project
  • ID:MCE0318
  • Pages:48
  • Reference:YES
ABSTRACT The constructional project involved the construction of an industrial barrow of standard size was constructed. The process used went across various Engineering practice. These involved the procurement of galvanized steel of 0.00mm to 300mm thickness. Some galvanized steel rods and pipes were also used for the construction.  The... Continue Reading
  • Type:Project
  • ID:MCE0317
  • Pages:21
  • Reference:YES
ABSTRACT The project title “fabrication of flow nozzle†was done by a selected group of Engineering Students and the practiced objective (aim) of the project was centered on constructing a nozzle that is capable of transporting fluid from one to the other, to determine the charge in velocity of the moving fluid across two given areas of... Continue Reading
  • Type:Project
  • ID:MCE0316
  • Pages:45
  • Reference:YES
ABSTRACT         A book shelve is a structure which here series of compartments for the preservation of books, valuable or useful materials, which are made up of metal, wood or plastic materials of construction. (Engineering materials).      The book shelve was constructed in the institute. (I.M.T Enugu).       However, before the... Continue Reading
  • Type:Project
  • ID:MCE0315
  • Pages:39
  • Reference:YES
ABSTRACT This project is a fabrication of a standard drawing writing desk using the cheapest, effective and most readily available materials. Method of maintenance and services were also taken into consideration. The functional aspect of the equipment was also given adequate consideration in the project work. Also take into consideration the... Continue Reading
  • Type:Project
  • ID:MCE0314
  • Pages:28
  • Reference:YES
ABSTRACT The need for an authentic and reliable report relating to the repairs and rehabilitation of a faulty air-conditioner is inevitable. Many homes and offices uses the air-conditioner to cool he temperature in their respective homes.  So the maintenance of the air-conditioner should be a top priority of every individual in order to avoid... Continue Reading
  • Type:Project
  • ID:MCE0313
  • Pages:52
  • Reference:YES
ABSTRACT This work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing. This will no doubt save considerable human labours and time wastage involved in conventional method of drying the spent grains by spreading on the ground. It also saves as a means of employments for our teaming population.... Continue Reading
  • Type:Project
  • ID:MCE0312
  • Pages:59
  • Reference:YES
ABSTRACT The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint. The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer, which is driven by an electrically made device, a... Continue Reading
  • Type:Project
  • ID:MCE0311
  • Pages:41
  • Reference:YES
ABSTRACT This project is concern about the construction of an electrical stove with three oven apartment is described in his project.  It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternative means to replace the use of  kerosene and gas for cooking and drying which are... Continue Reading
  • Type:Project
  • ID:MCE0310
  • Pages:28
  • Reference:YES
ABSTRACT Man’s impact on global environment system especially in the area of dust extraction is now at a scale where it is disrupting.  These dust extractors varies in major ways. The environmental degradation is, in turn contributing to health threat in this part of the globe.  Unfortunately most factories, workshops which suppose to... Continue Reading
  • Type:Project
  • ID:MCE0309
  • Pages:39
  • Reference:YES
ABSTRACT Bookshelf, a Mechanical arrangement of materials were documents are stored, it could be made with metal or wood.  But this one is fabricated with metal. The type of metal used in the fabrication is mild steel and square baluters. The undismountable bookshelf which has five partitions and four compartment under went many process namely,... Continue Reading
  • Type:Project
  • ID:MCE0308
  • Pages:24
  • Reference:YES
ABSTRACT This machine is meant for sealing and cutting of nylon bag of different sizes. This machine is operated with electrical system. This machine can cut and seal nylon of different sizes. It also comprises of materials as follows: Mechanical and Electrical section Mechanical section include the frame structure, lever and the pedal... Continue Reading
  • Type:Project
  • ID:MCE0307
  • Pages:47
  • Reference:YES
ABSTRACT This write up is a detail of the process and formulation of plan for the physical realization of the construction of a refrigerator. It is divided into chapter, which discussed extensively the practical refrigeration cycle with full attention given to design factors, working principle and choice of material. The method used in... Continue Reading
  • Type:Project
  • ID:MCE0306
  • Pages:74
  • Reference:YES
ABSTRACT This write up focuses attention on a detailed report and account on the process of construction and formulation of plan for the actual and physical realization of the construction of the project work captioned fabrication and construction of a mobile cooling system.  The report is therefore divided into chapters and each chapter... Continue Reading
  • Type:Project
  • ID:MCE0305
  • Pages:57
  • Reference:YES
The fast growing and developing population of the world is so busy that instant food noodles are gaining ground for both humans and domestic animals. Incidentally, the machines involved in the production of these food noddle extruders are imported which results in the depletion of our foreign exchange reserve. Consequently, there is a growing need... Continue Reading
  • Type:Project
  • ID:MCE0304
  • Pages:54
  • Reference:YES
ABSTRACT Composites have been developed with great success by the use of reinforcement. Monolithic materials cannot possess all the properties to be obtained hence, the need to employ the use of composite materials. Aluminum is generally utilized as a basic material particularly in the aerospace industry in view of its light weight property Be... Continue Reading
  • Type:Project
  • ID:MCE0303
  • Pages:68
  • Reference:YES
By definition, penetrant testing (PT) is the resurgence of a liquid (or a gas) from a discontinuity in which it had previously been introduced during a penetration operation. A logical extension of the visual examination, this method makes it possible to detect discontinuities opened to the surface of the controlled part in the form of colored or... Continue Reading
  • Type:Project
  • ID:MCE0302
  • Pages:9
  • Reference:YES
An energy audit on the Brass Liquified Natural Gas plant at Brass Island former Agip facility was carried. The average offshore windspeed and wave return periods for 12months  were measured for their wind and wave energy potentials. Also,  the solar insolation for the location was collected for a 12month period. A pilot design based on... Continue Reading
  • Type:Project
  • ID:MCE0301
  • Pages:33
  • Reference:YES
ABSTRACT This project work deals with the design and fabrication of a suitable journal bearing test apparatus which can help in visualizing the behavior of journal bearing and its characteristics, and in determining the bearing parameters such as load bearing capacity, maximum oil film temperature, viscosity of lubricant, oil film pressure, and... Continue Reading
  • Type:Project
  • ID:MCE0300
  • Pages:88
  • Reference:YES
Due to the need for recycling Polyethylene terephthalate (PET or PETE) materials, especially bottles because of its various uses and applications, it was necessary that a locally made machine for crushing and shredding the PET materials was fabricated. The crushing process is necessary so as to aid the transportation and workability of the... Continue Reading
  • Type:Project
  • ID:MCE0299
  • Pages:5
  • Reference:YES
A lawnmower is a machine that uses a revolving blade or blades to cut a lawn grass. Many designs have been made, each suited to a particular purpose. Manual grass cutter has environmental issues regarding pollution's and also require the need of man power to operate and has a great maintenance to its engine. This robot is design to be environment... Continue Reading
  • Type:Project
  • ID:MCE0298
  • Pages:67
  • Reference:YES
This project seek to modify the existing cassava grating machine to make it to be self-feeding in operation, to make the operation of the machine easier, safer The existing processing techniques used in the production of cassava starch and cassava dough leaves much to be desired. There are difficulties in the grating of the cassava dough, since... Continue Reading
  • Type:Project
  • ID:MCE0297
  • Pages:63
  • Reference:YES
The continuous search for sustainable alternative energy to non renewable energy to mitigate  environmental pollution has made waste heat recovery from industries process, material and  energy streams frontier. Power plant technologies like steam and Organic Rankine cycle are  been research by researchers to improve waste heat recovery... Continue Reading
  • Type:Project
  • ID:MCE0296
  • Pages:58
  • Reference:YES
The focus of this project was the development of an ICU/Rehabilitation adjustable bed for the hospital and home environment. The project was initiated with the desire to develop an innovative, effective and inexpensive mechanism that would require an electrical supply. The design was performed systematically using various methods, procedures,... Continue Reading
  • Type:Project
  • ID:MCE0295
  • Pages:57
  • Reference:YES
The development of a large scale multipurpose hot meal processing equipment was designed andsimulated for market oriented production as reported in this paper. This project involves thedesign,   design   layout and   performance   of   the  Hot  Meal   Processing   Equipment.   It  has   one compartment; the Agitator... Continue Reading
  • Type:Project
  • ID:MCE0294
  • Pages:216
  • Reference:YES
ABSTRACT The modern manufacturing environment is dynamic and uncertain. In line with the global trend in manufacturing, this project is carried out to explore into the potentials of robots in manufacturing, service industry, and domestic use. The robot was designed and  constructed to incorporate the use of mobile phones as control mechanism via... Continue Reading
  • Type:Project
  • ID:MCE0293
  • Pages:15
  • Reference:YES
ABSTRACT This project centers on addressing the issue of the lack of research and development in Nigeria, in this case, looking into the firefighting and emergency sector. In this industry, the safety of the firefighters is of paramount importance as it is only then that they can fully carry out their duties and tasks. Of all the products that... Continue Reading
  • Type:Project
  • ID:MCE0292
  • Pages:69
  • Reference:YES
Focuses on the maximum volume of waste generated in a particular month in a particular area and uses a heuristic model for it's analysis. Research Problem A proper, efficient, reliable and hygienic waste handling and disposal technique tells more of our maintenance culture but the capacity and ability to efficiently manage the  waste  becomes... Continue Reading
  • Type:Project
  • ID:MCE0291
  • Pages:124
  • Reference:YES
Abstract Indirect combustion noise had not been attracting research in the past, but recent indication seems to prove that it could be a threat in the future if not addressed. Means of reducing this type of noise to a low decibel value was also included. Noise is due to the ingestion of distorted atmospheric turbulence, as the two set of blades... Continue Reading
  • Type:Project
  • ID:MCE0290
  • Pages:17
  • Reference:YES
This project covers the design and construction of a power generating windmill. The designs was carried out based on long-term available wind data of bida at 10m above the ground level. The average wind speed for Bida is 5.24m/s and rated turbine wind speed is 6.29m/s. The design of each components of the system were carefully constructed in a... Continue Reading
  • Type:Project
  • ID:MCE0289
  • Pages:67
  • Reference:YES
Analysis of Longitudinal Aerodynamic Characteristics of an  Aircraft Model with and Without Winglet  Altab Hossain a *, Prithvi Raj Arora b , Ataur Rahman c , Abdul Aziz Jaafar b ,  A.K.M. Parvez Iqbal a a Department of Mechanical Engineering, University Industry Selangor, Jln Timur Tambahan, 45600 Batang Berjuntai,  Selangor Darul Ehsan,... Continue Reading
  • Type:Project
  • ID:MCE0288
  • Pages:8
  • Reference:YES
This project covers a study of the effect of seawater corrosion on 0.34% and 0.36% carbon steel  compositions. Two (2) specimens (steel rods) of length 150mm (each) for both steel compositions were  obtained. Out of each was gotten four (4) specimens of 10mm length, 10mm diameter and two  (2) specimens of 50mm length, 10mm diameter. This... Continue Reading
  • Type:Project
  • ID:MCE0287
  • Pages:52
  • Reference:YES
The major components of a gas turbine are compressor, combustors, turbine and generator. It operates by continuous drawing in fresh air into the compressor. The Air is then compressed to a high pressure in the compressor and discharge into the combustion. Here the air is missed with gas and burns continuous once ignited to increase its energy... Continue Reading
  • Type:Project
  • ID:MCE0286
  • Pages:33
  • Reference:YES
ABSTRACT This project illustrates the use of an exergetic approach to analyze the performance of a vapor compression refrigeration system using a refrigerant solution of a nanoparticle (TiO2), mineral oil, and R410a (base refrigerant). Exergy investigation is a thermodynamics strategy which allows for the assessment and improvement of a... Continue Reading
  • Type:Project
  • ID:MCE0285
  • Pages:83
  • Reference:YES
ABSTRACT The rate at which energy is lost by human activities is enormous. There is need to work on how to generate more energy and minimize the usage of the generated energy. In an internal combustion engine, there is need to focus on gaining energy usage by using generated heat during combustion process. To reduce the energy usage, emission rate... Continue Reading
  • Type:Project
  • ID:MCE0284
  • Pages:38
  • Reference:YES
Limited or poor food separation techniques into fine particles for further processing cause post-harvest losses of food crops and initiates the problem of food and nutritional insecurity in Nigeria. In order to solve this problem, food crops need to be processed into a lasting and nutritious consumable form through the use of mechanization.... Continue Reading
  • Type:Project
  • ID:MCE0283
  • Pages:20
  • Reference:YES
ABSTRACT The fabrication of the solar dryer was successful and test were carried out for various performance comparisons such as No-load and Load performance of the dryer and direct sun drying comparison and noticeable differences was noticed in the final moisture content such that the maximum temperature recorded in the drying chamber and solar... Continue Reading
  • Type:Project
  • ID:MCE0282
  • Pages:109
  • Reference:YES
ABSTRACT When comparing with other manufacturing technologies, the extrusion technology always stands out as it is known to be highly efficient in terms of producing products of superior quality with the least possible amount of wastage. With the ever-increasing cost of materials, energy and the competition in the market, it becomes almost... Continue Reading
  • Type:Project
  • ID:MCE0281
  • Pages:34
  • Reference:YES
ABSTRACT This work investigated the variation of top loss heat transfer coefficient with the emittance of the absorber plate, the collector tilt angle and air gap spacing between the absorber plate and the cover plate. The effects of the emittance of the absorber plate, the collector tilt angle and air gap spacing between the plate and the cover... Continue Reading
  • Type:Project
  • ID:MCE0280
  • Pages:157
  • Reference:YES
CHAPTER ONE: INTRODUCTION 1 Background of the Study 1 Statement of the Problem 6 Objectives of the Study 7 Justification for the Study 8 Scope and Limitations of the Work 9 Scope 9 Limitations 9 CHAPTER TWO: LITERATURE REVIEW 10 2.1 Small Hydropower Systems 10 2.1.1  Types of Hydroelectricity Generation 13 2.1.1.1 Conventional Hydroelectricity 13... Continue Reading
  • Type:Project
  • ID:MCE0279
  • Pages:105
  • Reference:YES
Abstract Working adults and university students find it difficult to complete their laundry in a day because of the unpredictable weather conditions in the tropics of West Africa. There are existing drying machines, but these machines are either not smart or they are hard to install and maintain and they cause easy damage to the clothes. In... Continue Reading
  • Type:Project
  • ID:MCE0278
  • Pages:84
  • Reference:YES
Abstract Gari is a very important staple food made from cassava and is eaten in many parts of Africa. Gari has a granular nature and may contain different sizes of grains ranging from as small as 1 mm to as large as 6 mm. Depending on where and how gari is going to be eaten, specific particle sizes are desirable. The market value of gari is... Continue Reading
  • Type:Project
  • ID:MCE0277
  • Pages:55
  • Reference:YES
Abstract As the world keeps evolving, the demand for electricity increases. The growing energy consumption leads to higher cost that many people, especially in Ghanaian rural areas, cannot afford. Thus, considering this, this paper focuses on designing a Stirling engine to pump water in homes. In order to contribute to the use of renewable energy... Continue Reading
  • Type:Project
  • ID:MCE0276
  • Pages:75
  • Reference:YES
Abstract An analysis report compiled by the OSHA lists eighty-eight (88) window cleaning accidents over the past 15 years of which sixty-two (62) resulted in fatalities [1]. Despite these statistics and the potential for injuries and deaths, the industry considers these numbers to be artificially low. Window cleaning is still not effectively... Continue Reading
  • Type:Project
  • ID:MCE0275
  • Pages:52
  • Reference:YES
Abstract All-Terrain vehicle as the name implies refers to a car that has been designed to handle a more extensive variety of terrains than most other cars. ATVs are used for several purposes which include recreational purposes and others ranging from military to jungle safaris and desert rides. ATVs are rated highly based on their ability to... Continue Reading
  • Type:Project
  • ID:MCE0274
  • Pages:84
  • Reference:YES
Abstract This project paper explains the design and fabrication of an inflatable wing using a flexible, low cost and easily accessible PVC material. In recent times, several researchers have explored the building of inflatable structures using expensive and high strength materials like Mylar and Kevlar. However, this project scope was... Continue Reading
  • Type:Project
  • ID:MCE0273
  • Pages:50
  • Reference:YES
Abstract Green roofing is a relatively new approach toward constructing environmentally friendly and sustainable roofing structures. Not only are these structures environmentally friendly, but they can be manipulated for the purposes of energy harvesting, thermal insulation or cooling while saving cost in the long run. Much like the green roof... Continue Reading
  • Type:Project
  • ID:MCE0272
  • Pages:58
  • Reference:YES
Abstract A Wind tunnel is a mechanical assembly used to analyze the behavior of air flow and the effects they have over objects. Using a wind tunnel, one can control the stream conditions which influence forces on the test object. Through the calculations of the forces on the model, one can anticipate the forces on the full-scale test object. In... Continue Reading
  • Type:Project
  • ID:MCE0271
  • Pages:40
  • Reference:YES
Abstract In this project the design of an automatic ground vehicle for use in warehouses is explained. Ecommerce has been growing rapidly across the globe because of the spread of the internet and due to the introduction and acceptance of secure digital payment systems. Volumes of products handled by online stores has been increasing exponentially... Continue Reading
  • Type:Project
  • ID:MCE0270
  • Pages:41
  • Reference:YES
Abstract Synthetic biology is the engineering of biology; it is the evaluation and design of biological systems in a rational and systematic manner. It blurs the lines between various science and engineering disciplines due its numerous applications, with one of the most significant being the use of biosensors in environmental remediation.... Continue Reading
  • Type:Project
  • ID:MCE0269
  • Pages:70
  • Reference:YES
Abstract The objectives a welding flux is expected to achieve are many and often mutually incompatible.... Continue Reading
  • Type:Project
  • ID:MCE0268
  • Pages:30
  • Reference:YES
Abstract Industrial accidents are on the rise. This fact is even more prevalent in developing countries where the countries lack the safety standards required to ensure workplace safety in the pursuit of economic development. As land in prime locations becomes increasingly scarce, there is an argument for building skyscrapers. But this just... Continue Reading
  • Type:Project
  • ID:MCE0267
  • Pages:72
  • Reference:YES
Abstract Aquatic search and rescue in Ghana and most parts of the world poses lots of disadvantages to the rescuers. Divers being tasked for each search and rescue mission risk their lives trying to locate a body or an object underwater. Sometimes, these divers are attacked by aquatic animals or even hit by submersible objects. This approach is... Continue Reading
  • Type:Project
  • ID:MCE0266
  • Pages:60
  • Reference:YES
Abstract Fossil Fuels are currently classified as some of the leading producers of greenhouse gases which are major agents of Global warming. This study establishes the benefits Liquified Natural Gas (LNG) would have when used as a fuel in a hybrid-electric vehicle. The study establishes a Parallel-Hybrid vehicle model equipped with a control... Continue Reading
  • Type:Project
  • ID:MCE0265
  • Pages:36
  • Reference:YES
Abstract This report presents the optimisation of a ceramic-matrix composite (anthill sand and cement), reinforced with treated coir fibres for applications in the construction of a low costsolar powered cooking stove to solve the current trends in the depletion of forest spaces in Ghana due to excessive destruction as a result of using firewood... Continue Reading
  • Type:Project
  • ID:MCE0264
  • Pages:69
  • Reference:YES
Abstract Diabetes mellitus, also known as diabetes has on major effect on its patients. This is the effect of impaired wound healing. Patients thus get minor wounds such as small cuts which become non-healing and are liable to get infected. Severe cases of such occasions lead to amputations. A solution to this problem is tissue regeneration with... Continue Reading
  • Type:Project
  • ID:MCE0263
  • Pages:63
  • Reference:YES
AbstractThe main purpose of the project is to convert polyethylenetetraphylate (PET), a known plastic waste material in Ghana, to wealth. Composite samples were produced by heating aggregates together with shredded PET plastic waste material, while bitumen was added to the plasticcoated aggregates. The composites produced were of 4.5 wt%, 9.0 wt%,... Continue Reading
  • Type:Project
  • ID:MCE0262
  • Pages:57
  • Reference:YES
ABSTRACT In this work, the state of stress between adhesively bonded single lap-joints was determined. The state of stress between adhesively bonded single lap-joints was determined by using a linear elastic analysis and experimental testing. In the analysis part of this work, the shear and normal stresses in an adhesively bonded single lap... Continue Reading
  • Type:Project
  • ID:MCE0261
  • Pages:85
  • Reference:YES
ABSTRACT This work analysed the performance of an automatic control system for the online blending of petrol with corrosion inhibitor in the direct, continuous electronic fuel injection automobile engine. The automatic control system was designed by superimposing a feedforward control system on a feedback control system. The design of the... Continue Reading
  • Type:Project
  • ID:MCE0260
  • Pages:87
  • Reference:YES
ABSTRACT This research work focused on the use of an hybrid RANS-LES turbulence model in simulating and checking the drag performance characteristics of an aerodynamic vehicle. The Spalart-Allmaras shear stress transport (SST)- Scale Adaptive Simulation (SAS) Turbulence model was selected for use, and with the help of OpenFOAM Finite Volume... Continue Reading
  • Type:Project
  • ID:MCE0259
  • Pages:117
  • Reference:YES
ABSTRACT This research work is aimed at using the energy and exergy analysis with thermodynamic data to suggest improvements in the performance of steam and gas turbine power plants. In this regard, specific data from Egbin steam power plant and Geregu I gas turbine power plant were used for the analysis. In the analysis, scientific tools such as... Continue Reading
  • Type:Project
  • ID:MCE0258
  • Pages:301
  • Reference:YES
ABSTRACT This study brought to the fore, a critical evaluation of the potentials of natural gas in the economic development of Nigeria. Natural gas option was considered the best alternative energy resource to other resources for optimizing income earning, indigent capacity building and the socio-economic development of an over populated Nigeria.... Continue Reading
  • Type:Project
  • ID:MCE0257
  • Pages:81
  • Reference:YES
TABLE OF CONTENT                                                                                                     PAGES Front page…………………………………………………………………………                i... Continue Reading
  • Type:Project
  • ID:MCE0256
  • Pages:34
  • Reference:YES
CFD investigation of mesh, boundary condition and location, and the effect of turbulence models on the turbulent separated flow over a forward-backward-facing step. A numerical model was set up to replicate and compare with the model in the literature. The Reynolds number, Re, is 1.7E 5  based on step height 50 mm and obstacle length L = 10H. The... Continue Reading
  • Type:Project
  • ID:MCE0255
  • Pages:4
  • Reference:YES
ABSTRACT A vehicle such as a large truck Can generate electricity for operating a hybrid engine or recharging batteries by use of an electricity generating driveshaft.   The electricity generating driveshaft is comprised of a magnetized driveshaft which acts as a rotor, and a series of copper wire coils surrounding the magnetized driveshaft which... Continue Reading
  • Type:Project
  • ID:MCE0254
  • Pages:16
  • Reference:YES
ABSTRACT Groundnut shelling machine was designed and fabricated at the department of Mechanical Engineering, institute of Technology, Kwara State Polytechnic Ilorin aimed at increasing shelling/decorticating efficiency and eliminating drudgery associated with the traditional method of -shelling groundnut and other developed method such as pedal... Continue Reading
  • Type:Project
  • ID:MCE0253
  • Pages:22
  • Reference:YES
ABSTRACT An experimental evaluation of the performance of a charcoal stove designed to reduce human labour and health hazards associated with frying in open fire was carried out. The channel- type metallic stove was lagged with 2.54 mm thick glass wool. The charcoal grate is 160 mm from the floor and has 44 holes of 12 mm diameter each to serve as... Continue Reading
  • Type:Project
  • ID:MCE0252
  • Pages:138
  • Reference:YES
ABSTRACT Relevant literature for the modeling and analysis of failure of GRP composites were reviewed. Samples of GRP composites were prepared by hand-lay up. Composites samples were subjected to compressive tests using a tensometer. Mechanical characteristics, such as modulus of elasticity; compressive strength, proportionality limit, elastic... Continue Reading
  • Type:Project
  • ID:MCE0251
  • Pages:317
  • Reference:YES
ABSTRACT Glass mat reinforcement, which can be easily shattered, is widely used across the world in military, automobile, civil, railway and electronic engineering among others. This research investigated the fracture mechanics of reinforced polyester composites on exposure to sudden impact force, using experimental and analytical methods based on... Continue Reading
  • Type:Project
  • ID:MCE0250
  • Pages:85
  • Reference:YES
ABSTRACT  Energy and exergy analysis of solar air heater with phase change material energy storage is considered in this research work. Energy and exergy models for component systems like flat plate solar collector and phase change material in one-dimensional heat conduction in a cylindrical pipe, for storing periods were obtained. Exergy... Continue Reading
  • Type:Project
  • ID:MCE0249
  • Pages:90
  • Reference:YES
ABSTRACT This study assess lubricant Oil Discharge on Soil Properties in mechanic village. It spans through the effects on soil properties, effects on water bodies, effects on human and other living organisms, effects on the environment, general hazards caused by this activity... Continue Reading
  • Type:Project
  • ID:MCE0248
  • Pages:40
  • Chapters:3
  • Methodology:Scientific
  • Reference:YES
ABSTRACT This project has been design and fabricated with special economical needs for small scale baking industries, wholesalers and distributors who impact this type of baking even from outside the country to su0pply the customers. And in view of the scarcity and high cost of gas and electricity in the country and also smoke release when using... Continue Reading
  • Type:Project
  • ID:MCE0247
  • Pages:55
  • Reference:YES
DESIGN AND FABRICATION OF AN ICE-BLOCK MAKING MACHINE ABSTRACT This work is titled construction and fabrication of an ice block making machine. Ice block making machine revolves around the concept of refrigeration. The concept of refrigeration revolves around the reverse Carnot cycle. This is a cycle involving isentropic expansion (at the... Continue Reading
  • Type:Project
  • ID:MCE0246
  • Pages:70
  • Chapters:5
  • Methodology:Scientific
  • Reference:YES
ABSTRACT The rate at which energy is lost by human activities is enormous. There is need to work on how to generate more energy and minimize the usage of the generated energy. In an internal combustion engine, there is need to focus on gaining energy usage by using generated heat during combustion process. To reduce the energy usage, emission rate... Continue Reading
  • Type:Project
  • ID:MCE0245
  • Pages:38
  • Reference:YES
see deeper... Continue Reading
  • Type:Project
  • ID:MCE0244
  • Pages:12
  • Reference:YES
see deeper... Continue Reading
  • Type:Project
  • ID:MCE0243
  • Pages:12
  • Reference:YES
ABSTRACT Description of a system and peripherals or devices in a computer system in which the operating of such devices is under control of the central processing unit is termed on-line. Because of the efficiency and fast services, this project is equally aimed at creating a computer based lottery which allows entire to be sold over the phone,... Continue Reading
  • Type:Project
  • ID:MCE0242
  • Pages:46
  • Reference:YES
ABSTRACT This project work deals with the design and fabrication of a suitable journal bearing test apparatus which can help in visualizing the behavior of journal bearing and its characteristics, and in determining the bearing parameters such as load bearing capacity, maximum oil film temperature, viscosity of lubricant, oil film pressure, and... Continue Reading
  • Type:Project
  • ID:MCE0241
  • Pages:88
  • Reference:YES
Due to the need for recycling Polyethylene terephthalate (PET or PETE) materials, especially bottles because of its various uses and applications, it was necessary that a locally made machine for crushing and shredding the PET materials was fabricated. The crushing process is necessary so as to aid the transportation and workability of the... Continue Reading
  • Type:Project
  • ID:MCE0240
  • Pages:5
  • Reference:YES
ABSTRACT This project work deals with the design and fabrication of a suitable journal bearing test apparatus which can help in visualizing the behavior of journal bearing and its characteristics, and in determining the bearing parameters such as load bearing capacity, maximum oil film temperature, viscosity of lubricant, oil film pressure, and... Continue Reading
  • Type:Project
  • ID:MCE0239
  • Pages:88
  • Reference:YES
Due to the need for recycling Polyethylene terephthalate (PET or PETE) materials, especially bottles because of its various uses and applications, it was necessary that a locally made machine for crushing and shredding the PET materials was fabricated. The crushing process is necessary so as to aid the transportation and workability of the... Continue Reading
  • Type:Project
  • ID:MCE0238
  • Pages:5
  • Reference:YES
A lawnmower is a machine that uses a revolving blade or blades to cut a lawn grass. Many designs have been made, each suited to a particular purpose. Manual grass cutter has environmental issues regarding pollution's and also require the need of man power to operate and has a great maintenance to its engine. This robot is design to be environment... Continue Reading
  • Type:Project
  • ID:MCE0237
  • Pages:67
  • Reference:YES
This project seek to modify the existing cassava grating machine to make it to be self-feeding in operation, to make the operation of the machine easier, safer The existing processing techniques used in the production of cassava starch and cassava dough leaves much to be desired. There are difficulties in the grating of the cassava dough, since... Continue Reading
  • Type:Project
  • ID:MCE0236
  • Pages:63
  • Reference:YES
A lawnmower is a machine that uses a revolving blade or blades to cut a lawn grass. Many designs have been made, each suited to a particular purpose. Manual grass cutter has environmental issues regarding pollution's and also require the need of man power to operate and has a great maintenance to its engine. This robot is design to be environment... Continue Reading
  • Type:Project
  • ID:MCE0235
  • Pages:67
  • Reference:YES
This project seek to modify the existing cassava grating machine to make it to be self-feeding in operation, to make the operation of the machine easier, safer The existing processing techniques used in the production of cassava starch and cassava dough leaves much to be desired. There are difficulties in the grating of the cassava dough, since... Continue Reading
  • Type:Project
  • ID:MCE0234
  • Pages:63
  • Reference:YES
The continuous search for sustainable alternative energy to non renewable energy to mitigate  environmental pollution has made waste heat recovery from industries process, material and  energy streams frontier. Power plant technologies like steam and Organic Rankine cycle are  been research by researchers to improve waste heat recovery... Continue Reading
  • Type:Project
  • ID:MCE0233
  • Pages:58
  • Reference:YES
The major components of a gas turbine are compressor, combustors, turbine and generator. It operates by continuous drawing in fresh air into the compressor. The Air is then compressed to a high pressure in the compressor and discharge into the combustion. Here the air is missed with gas and burns continuous once ignited to increase its energy... Continue Reading
  • Type:Project
  • ID:MCE0232
  • Pages:33
  • Reference:YES
ABSTRACT This project illustrates the use of an exergetic approach to analyze the performance of a vapor compression refrigeration system using a refrigerant solution of a nanoparticle (TiO2), mineral oil, and R410a (base refrigerant). Exergy investigation is a thermodynamics strategy which allows for the assessment and improvement of a... Continue Reading
  • Type:Project
  • ID:MCE0231
  • Pages:83
  • Reference:YES
This project covers the design and construction of a power generating windmill. The designs was carried out based on long-term available wind data of bida at 10m above the ground level. The average wind speed for Bida is 5.24m/s and rated turbine wind speed is 6.29m/s. The design of each components of the system were carefully constructed in a... Continue Reading
  • Type:Project
  • ID:MCE0230
  • Pages:67
  • Reference:YES
The focus of this project was the development of an ICU/Rehabilitation adjustable bed for the hospital and home environment. The project was initiated with the desire to develop an innovative, effective and inexpensive mechanism that would require an electrical supply. The design was performed systematically using various methods, procedures,... Continue Reading
  • Type:Project
  • ID:MCE0229
  • Pages:57
  • Reference:YES
CHAPTER ONE: INTRODUCTION 1 Background of the Study 1 Statement of the Problem 6 Objectives of the Study 7 Justification for the Study 8 Scope and Limitations of the Work 9 Scope 9 Limitations 9 CHAPTER TWO: LITERATURE REVIEW 10 2.1 Small Hydropower Systems 10 2.1.1 Types of Hydroelectricity Generation 13 2.1.1.1 Conventional Hydroelectricity 13... Continue Reading
  • Type:Project
  • ID:MCE0228
  • Pages:105
  • Reference:YES
ABSTRACT The study explored the prospects and challenges in the informal auto-mechanic sector focusing on auto-mechanics enterprises within the Kumasi Metropolis. Specifically, the study sought to examine the prospects of the auto-mechanic enterprises, examine the challenges facing auto-mechanic enterprises, and the preparedness of auto-mechanics... Continue Reading
  • Type:Project
  • ID:MCE0227
  • Pages:85
  • Reference:YES
ABSTRACT This project centers on addressing the issue of the lack of research and development in Nigeria, in this case, looking into the firefighting and emergency sector. In this industry, the safety of the firefighters is of paramount importance as it is only then that they can fully carry out their duties and tasks. Of all the products that... Continue Reading
  • Type:Project
  • ID:MCE0226
  • Pages:69
  • Reference:YES
Focuses on the maximum volume of waste generated in a particular month in a particular area and uses a heuristic model for it's analysis. Research Problem A proper, efficient, reliable and hygienic waste handling and disposal technique tells more of our maintenance culture but the capacity and ability to efficiently manage the waste becomes... Continue Reading
  • Type:Project
  • ID:MCE0225
  • Pages:124
  • Reference:YES
INTRODUCTION Power amplifier is an electronic device, which is used to increase sound energy. In other words, the final stage which must driven a given load e.g mechanical indicator, a loudspeaker cathode roy tade, magnetic deflection coil, a transmitting accrual of a communication network. Power amplifier is also used in regulation power... Continue Reading
  • Type:Project
  • ID:MCE0224
  • Pages:34
  • Reference:YES
ABSTRACT This work was centered on the Design and implementation of a simple scientific calculator for education organization. The study traced calculator system as a tool to completely change mathematical knowledge and sophisticated problems solving strategies had advanced the field of simulated engine in mathematic. This project work also... Continue Reading
  • Type:Project
  • ID:MCE0223
  • Pages:47
  • Reference:YES
ABSTRACT In this project (3) alternative design solutions were considered for the locally made electric run. The authors utilize the available local raw demerits of each alternative with respect to the considered group were discussed and the solutions of the alternative that best satisfied the limitations was selected for production. Material... Continue Reading
  • Type:Project
  • ID:MCE0222
  • Pages:42
  • Reference:YES
ABSTRACT In all types of air –conditioning work a through knowledge of basic principal is varying important. The report of the project “re pair and rehabilitation of a faulty Air–conditioner” serves as guide to project implementation. It explains and illustrates the import principle of operation and various maintenance procedures in an... Continue Reading
  • Type:Project
  • ID:MCE0221
  • Pages:37
  • Reference:YES
ABSTRACT This write up outlines the design and fabrication of wood lathe machine. This type of lathe is capable of creating different wood designs using the cheapest available material and method. To achieve functional and efficient wood lathe of this kind, we analyzed as well as synthesized the different possible design solutions and concepts.... Continue Reading
  • Type:Project
  • ID:MCE0220
  • Pages:44
  • Reference:YES
LETTER PRESS PRINTING 1.1 THE BASIC PRINCIPLE: Letterpress is a highly versatile printing process. It is adaptable to both short and long printing runs, from a few hundreds to several millions of printed impressions. In letterpress printing the image area of the printing surface stands in relief, raised above the surrounding non-image areas. Ink... Continue Reading
  • Type:Project
  • ID:MCE0219
  • Pages:51
  • Reference:YES
ABSTRACT When comparing with other manufacturing technologies, the extrusion technology always stands out as it is known to be highly efficient in terms of producing products of superior quality with the least possible amount of wastage. With the ever-increasing cost of materials, energy and the competition in the market, it becomes almost... Continue Reading
  • Type:Project
  • ID:MCE0218
  • Pages:34
  • Reference:YES
ABSTRACT A workshop cupboard is a facility designed from mild steel for the storage of various materials, like book material and non-book materials e.g. workshop tools, labouratory wares and reagents, etc; after operations in a chemical labouratory, mechanical workshop, or else where. The construction of a workshop cupboard requires the... Continue Reading
  • Type:Project
  • ID:MCE0217
  • Pages:69
  • Reference:YES
ABSTRACT It views of the smoke released when using a firewood for baking cakes, bread, preserve fresh fishes and warming or remove ice form frozen food by some mothers at home, restaurant, fast food shops etc. We discovered the need to design and fabricated kerosene pressurized Oven that will reduce the amount of smoke emitting into the atmosphere... Continue Reading
  • Type:Project
  • ID:MCE0216
  • Pages:64
  • Reference:YES
ABSTRACT The aim of this project is to capture the utilization of pumps for various uses and to maximize the principle of selection of water pumps through the application and pump selection for specific uses our society will transformed wholestically to an industrious nation in the clean water supply for supply for domestic, industrial and down... Continue Reading
  • Type:Project
  • ID:MCE0215
  • Pages:48
  • Reference:YES
Abstract Indirect combustion noise had not been attracting research in the past, but recent indication seems to prove that it could be a threat in the future if not addressed. Means of reducing this type of noise to a low decibel value was also included. Noise is due to the ingestion of distorted atmospheric turbulence, as the two set of blades... Continue Reading
  • Type:Project
  • ID:MCE0214
  • Pages:17
  • Reference:YES
ABSTRACT This research is centered on the design and fabrication of copula furnace and atomizer for the production aluminium powder metal with the available material.0.4kg of refined coke was chosen as the basis for material and energy balance calculations and the design calculations performed from whose values are used to produce the design... Continue Reading
  • Type:Project
  • ID:MCE0213
  • Pages:108
  • Reference:YES
ABSTRACT Packaging of food which is viable means of business opportunity has been exploited by individuals and corporate bodies for a very long time because the importance of packaging food products are very enormous ranging from protection of the product to preventing the food from spoiling. There is no way one can successfully go into business... Continue Reading
  • Type:Project
  • ID:MCE0212
  • Pages:44
  • Reference:YES
ABSTRACT An escalator is a moving staircase conveyor transport device for carrying people between floors of a building. The device consists of a motor-driven chain of individual, linked steps that move up or down on tracks, allowing the step treads to remain horizontal. Escalators are used around the world to move pedestrian traffic in places... Continue Reading
  • Type:Project
  • ID:MCE0211
  • Pages:52
  • Reference:YES
ABSTRACT Brazing alloys used for brazing the components of gas turbines and aerospace applications contain nickel as the base material. Nickel has highest affinity for oxygen. Incase if components are brazed using nickel as based filter material in air or atmosphere the braze joint will porous and braze strength is not achievable. To avoid the... Continue Reading
  • Type:Project
  • ID:MCE0210
  • Pages:68
  • Reference:YES
ABSTRACT The designed Air Driven Engine is an economic friendly engine which operates with the aid of a compressed air. In principle, an Air Driven Engine uses the expansion of compressed air to drive the pistons of an engine. An Air Driven Engine is a pneumatic actuator that creates useful work by expanding compressed air. There is no mixing of... Continue Reading
  • Type:Project
  • ID:MCE0209
  • Pages:44
  • Reference:YES
ABSTRACT: The designed air driven engine is an economic friendly engine which operates with the aid of a compressed air. in principle, an air driven engine uses the expansion of compressed air to drive the pistons of an engine. an air driven engine is a pneumatic actuator that creates useful work by expanding compressed air. there is no mixing of... Continue Reading
  • Type:Project
  • ID:MCE0208
  • Pages:44
  • Reference:YES
ABSTRACT Despite all attempt of the federal government to have not only an uninterrupted power supply for all cities in Nigeria, but a voltage that is inconformity with the recommended 220/230v for domestic consumption for example. The NEPA Plc is facing some difficulties in generating, transmitting and distributing the required voltage... Continue Reading
  • Type:Project
  • ID:MCE0207
  • Pages:44
  • Reference:YES
ABSTRACT The intruder alarm system was designed and build in order to let the industrial and commercial company know how important alarm system is all about. These can be of Good help if the intruder will look through this project and support for the development of this project as to let the Federal Government know that the young engineering of... Continue Reading
  • Type:Project
  • ID:MCE0206
  • Pages:41
  • Reference:YES
ABSTRACT This project is he design and construction of a voltage inverter system with trickle charging system. This device is design to provide power supply for the need of offices, household etc. In absence of NEPA power supply. It would also prevent harm to our appliances caused by power holding company LTD (NEPA) Random power outage . TABLE OF... Continue Reading
  • Type:Project
  • ID:MCE0205
  • Pages:39
  • Reference:YES
ABSTRACT Mechanical Engineering Department of the named Institute has many non – operational malhiues. Sequel to the fact, maintenance was poorly excuted which resulted to the breakdown deep freezer. Quality and effectiveness of machine maintenance were well observed. Also, a minimized maintenance and a highly successful repair was adopted. In... Continue Reading
  • Type:Project
  • ID:MCE0204
  • Pages:39
  • Reference:YES
An energy audit on the Brass Liquified Natural Gas plant at Brass Island former Agip facility was carried. The average offshore windspeed and wave return periods for 12months  were measured for their wind and wave energy potentials. Also,  the solar insolation for the location was collected for a 12month period. A pilot design based on... Continue Reading
  • Type:Project
  • ID:MCE0203
  • Pages:33
  • Reference:YES
ABSTRACT Composites have been developed with great success by the use of reinforcement. Monolithic materials cannot possess all the properties to be obtained hence, the need to employ the use of composite materials. Aluminum is generally utilized as a basic material particularly in the aerospace industry in view of its light weight property Be... Continue Reading
  • Type:Project
  • ID:MCE0202
  • Pages:68
  • Reference:YES
INTRODUCTION The purpose of a control system is to produce a desired output. This output is usually specified by a command input, and is often a function of time. For simple applications in well structured situations, to control, and the controller must have the capability of reacting to disturbance, changes in its environment, and new input... Continue Reading
  • Type:Project
  • ID:MCE0201
  • Pages:41
  • Reference:YES
INTRODUCTION Communication means extending information form one person to another in a way in which it can be understood. Information and ideas in technical and scientific fields can very often be more easily communicated through sketching or instrument drawing and blueprint reading. Drawing involves describing the shape and size of an object.... Continue Reading
  • Type:Project
  • ID:MCE0200
  • Pages:72
  • Reference:YES
ABSTRACT This project work-up deals on the design and construction of a single phase step down nations fermor, with raking IKVA, 240V/11OV, 80V 12U, 6V. It is a multi-circuit transformer that has one input as the primary and tappins to produce the output (secondary). It is considered as a single coil in series with the supply and a common coil to... Continue Reading
  • Type:Project
  • ID:MCE0199
  • Pages:38
  • Reference:YES
ABSTRACT The process involved in the design and fabrication of a creep material testing equipment ranges from carrying out the feasibility studies of the project to the designed and especially of ensuring its functionality. Since it is used in the testing of failure of material under loading, different engineering principles employed in the design... Continue Reading
  • Type:Project
  • ID:MCE0198
  • Pages:50
  • Reference:YES
ABSTRACT The need for an authentic and reliable report relating to the design and construction of 80cm x 70cm x 50cm mobile deep freezer is inevitable. It should be a top priority of every individual in order to avoid huge expenditure in purchase to foreign ones. Its for this reason that this report is written for the benefit of those who are... Continue Reading
  • Type:Project
  • ID:MCE0197
  • Pages:42
  • Reference:YES
ABSTRACT This work is aimed at the removal of hazardous gases and dust particles, air channeling etc. This work is aimed at achieving industrial waste control therein safe – guarding the immediate environment. Chapter one accounts for the introduction of the project. Chapter two involves literature review in the origin, types and alternative... Continue Reading
  • Type:Project
  • ID:MCE0196
  • Pages:34
  • Reference:YES
ABSTRACT The ill treatment that take place in our motor vehicle Drivers licensing office today, one have to wait endlessly in order to get his driver’s licensing or renew his driver license and so on. This is a problem that is experienced daily, which robs the government a huge sum of money through fraudulent means. Being a system run manually,... Continue Reading
  • Type:Project
  • ID:MCE0195
  • Pages:68
  • Reference:YES
ABSTRACT Voting is a very important process in the Nigerian political system.  It is one of the means and most effective method of ensuring a legitimate government through popular participation.  To enthrone sound democracy and stability in the political system of the Enugu state a system of rig-free voting has to be put in place. The system... Continue Reading
  • Type:Project
  • ID:MCE0194
  • Pages:74
  • Chapters:7
  • Methodology:Nil
  • Reference:YES
ABSTRACT The magical impact of computer has made enormous contribution to all aspect of the society people can now do things easily unlike in the past. Computers have lesson human activities (effort) in their day to day life, by reducing both human labour and time in solving their problem which are both numerous / unlimited. The introduction of... Continue Reading
  • Type:Project
  • ID:MCE0193
  • Pages:44
  • Reference:YES
INTRODUCTION Each machine consists in principle of three basic parts: a motor or another prime mover (that sets the machine in motion), an actuating mechanism (which is directly doing the needed work: digs a ditch, weaves cloth, peels potatoes, propels a ship, and so on), and a transmission that connects the first two parts. Sometimes, the... Continue Reading
  • Type:Project
  • ID:MCE0192
  • Pages:20
  • Reference:YES
ABSTRACT The precise content of this project was to construct a model shell and tube heat exchanger. The material for construction of this project (equipment) and their dimensions are as follows: 1. 500mm length of a tube bundle 2. 20mm diameter of the tube bundle 3. 650mm length of the shell 4. 120mm diameter of the shell 5. 70mm length of the... Continue Reading
  • Type:Project
  • ID:MCE0191
  • Pages:58
  • Reference:YES
INTRODUCTION REFRIGERATION Refrigeration is a branch of science that deals with the process of removing heat from a substance or space in order to make it cooler. Refrigerator is defined as a device that is used in cooling the internal temperature below the room temperature (that is between 250C to 300C). Generally, however, for a space or... Continue Reading
  • Type:Project
  • ID:MCE0190
  • Pages:35
  • Reference:YES
ABSTRACT In the mechanical engineering department of institute of management and technology there are many machines but it is not all that is functioning well. This may airless as a result of lack of maintenance which is a prove in the breakdown of the air conditioner. The quality and effectiveness of materials were mated very well as referred to... Continue Reading
  • Type:Project
  • ID:MCE0189
  • Pages:35
  • Reference:YES
ABSTRACT Knowledge could only be obtained successively by the use of books for research. This can be achieved only by preserving books already purchased. As a result we fabricate a metallic shelf made up of metallic sheet; precisely mild steel sheets. The mild steel used for the fabrication of the shelf is 1.5mm (16gauge) mild steel. The shelf is... Continue Reading
  • Type:Project
  • ID:MCE0188
  • Pages:24
  • Reference:YES
ABSTRACT Most Stock Marketing Report, production, and manufacturing firms have the basic problem of information flow between the various departments within the organization. This research is intended to highlight the role of a computerized Stock Marketing Report information system in NSEC Compare to the manual system of Stock Marketing Report. To... Continue Reading
  • Type:Project
  • ID:MCE0187
  • Pages:53
  • Reference:YES
ABSTRACT A Budget being the planning of how to spend revenues and incoming capitals so this makes is necessary to make sure that it is done with extra care. Budgets and the methods of preparing a good one has been a problem to most organization both private and government, the implementation of a faulty budget has brought man companies to a close... Continue Reading
  • Type:Project
  • ID:MCE0186
  • Pages:53
  • Reference:YES
ABSTRACT The importance of financial accounting is gradually being recognized as germane to prudent management of any business firm. This has necessitated the need for the computerization of structured operations of the financial managers structured operations are known with certainly for instance, the computation and decisions based on financial... Continue Reading
  • Type:Project
  • ID:MCE0185
  • Pages:54
  • Reference:YES
ABSTRACT This research is centered on the design and fabrication of copula furnace and atomizer for the production aluminium powder metal with the available material.0.4kg of refined coke was chosen as the basis for material and energy balance calculations and the design calculations performed from whose values are used to produce the design... Continue Reading
  • Type:Project
  • ID:MCE0184
  • Pages:108
  • Reference:YES
ABSTRACT Packaging of food which is viable means of business opportunity has been exploited by individuals and corporate bodies for a very long time because the importance of packaging food products are very enormous ranging from protection of the product to preventing the food from spoiling. There is no way one can successfully go into business... Continue Reading
  • Type:Project
  • ID:MCE0183
  • Pages:44
  • Reference:YES
ABSTRACT An escalator is a moving staircase conveyor transport device for carrying people between floors of a building. The device consists of a motor-driven chain of individual, linked steps that move up or down on tracks, allowing the step treads to remain horizontal. Escalators are used around the world to move pedestrian traffic in places... Continue Reading
  • Type:Project
  • ID:MCE0182
  • Pages:52
  • Reference:YES
ABSTRACT Brazing alloys used for brazing the components of gas turbines and aerospace applications contain nickel as the base material. Nickel has highest affinity for oxygen. Incase if components are brazed using nickel as based filter material in air or atmosphere the braze joint will porous and braze strength is not achievable. To avoid the... Continue Reading
  • Type:Project
  • ID:MCE0181
  • Pages:68
  • Reference:YES
ABSTRACT This research work was carried out to evaluate the different methods of corrosion prevention, control and monitoring. In the course of the research many scholarly articles on the subject matter were reviewed from which the researcher got lot information concerning the topic at hand. Thus making the research work a reliable source of... Continue Reading
  • Type:Project
  • ID:MCE0180
  • Pages:50
  • Reference:YES
ABSTRACT The working principles of a window air conditioning system was described with the mode of operationg of the refrigeration cycle and its construcion. The aim of every window Air conditioning system is to achieve cooling. Change of temperature system were discussed with the methods of improving the performance of th window Air Conditioning... Continue Reading
  • Type:Project
  • ID:MCE0179
  • Pages:94
  • Reference:YES
ABSTRACT The project work Rehabilitation and Repair of A Window Unit Air Conditioner exposes us to the internal working mechanism of the window unit a.c. The working principles component unit, faults and effective repairs carried out to ensure the serviceability of the broken down unit. It buttress the need for routine maintenance, and effective... Continue Reading
  • Type:Project
  • ID:MCE0178
  • Pages:32
  • Reference:YES
ABSTRACT In this project, three (3) alternative design solutions were considered for the camp-bed. The authors utilize the local raw materials (with cost consideration) for the comments. The merits and demerits of each of the alternative with respect to the considered grip were also discussed and the solutions of the alternatives that best... Continue Reading
  • Type:Project
  • ID:MCE0177
  • Pages:29
  • Reference:YES
ABSTRACT Conveying goods from one place to another via trucks has been a long-held practice because of its usefulness. There are different types of trucks that are available in this regard such as ; two axle, three axle, four axle trucks etc and each with its unique functionality. Businesses relying on the movement of bulky raw materials and... Continue Reading
  • Type:Project
  • ID:MCE0176
  • Pages:24
  • Reference:YES
ABSTRACT During forging or furnace operation, air is the utility that should be available at all time in order to ensure a smooth and standardized operation. Supplying air manually will reduce productivity and more man hour to accomplish a given task.  Thus, an electric blower was designed in this regard with an efficient electric motor as the... Continue Reading
  • Type:Project
  • ID:MCE0175
  • Pages:48
  • Chapters:5
  • Methodology:Scientific
  • Reference:YES
The development of a large scale multipurpose hot meal processing equipment was designed andsimulated for market oriented production as reported in this paper. This project involves thedesign, design layout and performance of the Hot Meal Processing Equipment. It has one compartment; the Agitator compartment. The Agitator has three curves like... Continue Reading
  • Type:Project
  • ID:MCE0174
  • Pages:216
  • Reference:YES
ABSTRACT The modern manufacturing environment is dynamic and uncertain. In line with the global trend in manufacturing, this project is carried out to explore into the potentials of robots in manufacturing, service industry, and domestic use. The robot was designed and  constructed to incorporate the use of mobile phones as control mechanism via... Continue Reading
  • Type:Project
  • ID:MCE0173
  • Pages:15
  • Reference:YES
ABSTRACT In recent times, most of the household appliances are using electric power and as such, electricity shortage has become a major problem throughout the world. Ceiling fan is one of such appliances that consume electric power. The best way to minimize the power consumption of the ceiling fan is to reduce the weight of the ceiling fan blade.... Continue Reading
  • Type:Project
  • ID:MCE0172
  • Pages:35
  • Reference:YES
ABSTRACT Packaging of food which is viable means of business opportunity has been exploited by individuals and corporate bodies for a very long time because the importance of packaging food products are very enormous ranging from protection of the product to preventing the food from spoiling. There is no way one can successfully go into business... Continue Reading
  • Type:Project
  • ID:MCE0171
  • Pages:34
  • Reference:YES
ABSTRACT Wheelbarrow is a simple machine, which belong to the second-class lever. This is because the load or resistance is placed between the effort and the fulcrum. It is used in many areas of work to convey loads that are too heavy or bulky to be carried by hand. Wheelbarrow can be used as farm equipment, industrial equipment among others.... Continue Reading
  • Type:Project
  • ID:MCE0170
  • Pages:51
  • Reference:YES
ABSTRACT When it comes to construction projects, landscaping work, and gardening, you need the right kind of equipment to finish tasks speedily and easily. One piece of equipment you would need is a motorised wheelbarrow. This is intended to carry bulky materials and heavy loads. There are a lot of equipments that can be used these days for... Continue Reading
  • Type:Project
  • ID:MCE0169
  • Pages:60
  • Reference:YES
ABSTRACT This wrote up is a detail of the processes for the physical realization of the design and construction of mobile deep freezer. It is divided into chapters which discussed expensively the practical refrigeration cycle with rull attention given to design factors working principals and choice of material. Also considered were fabrication... Continue Reading
  • Type:Project
  • ID:MCE0168
  • Pages:36
  • Reference:YES
ABSTRACT In the society at large Technology is fast replacing the crude method of carrying out work and has been making room for employment. Besides, it has also caught the attention of the youths who will prefer to work in a company with technological operations than one with man-power operations. This project can be used to convey materials... Continue Reading
  • Type:Project
  • ID:MCE0167
  • Pages:35
  • Reference:YES
INTRODUCTION REFRIGERATION Refrigeration is a branch of science that deals with the process of removing heat from a substance or space in order to make it cooler. Refrigerator is defined as a device that is used in cooling the internal temperature below the room temperature (that is between 250C to 300C). Generally, however, for a space or... Continue Reading
  • Type:Project
  • ID:MCE0166
  • Pages:36
  • Reference:YES
ABSTRACT This Nylon sealing and cutting machine has an added advantage of making 800 sealed bags per hour. The constructional machines were sourced locally. The machine can cut and seal Nylon at a affordable cost. The constructional size of 31 cm x 7.5cm x 12.4 which comprises the following component. The sealing and cutting filament, the... Continue Reading
  • Type:Project
  • ID:MCE0165
  • Pages:23
  • Reference:YES
INTRODUCTION The production of bench shearing machines to reduce, alleviate and probably eliminate suffering, time, money, wastage of material and more especially the need for technological break through and self reliance has been a major concern of the federal government. Metal shearing and shaping has been a tiring problem in the society from... Continue Reading
  • Type:Project
  • ID:MCE0164
  • Pages:28
  • Reference:YES
INTRODUCTION This project of fabrication of single face pressurized kerosene cooker is a copied design. It is a manually operated type of stove, which has the capacity of supplying heat energy at high and low temperature. The type of stove so designed here do the industrial type with one burner.  Since the introduction of this pressurized... Continue Reading
  • Type:Project
  • ID:MCE0163
  • Pages:21
  • Chapters:7
  • Methodology:Nil
  • Reference:YES
By definition, penetrant testing (PT) is the resurgence of a liquid (or a gas) from a discontinuity in which it had previously been introduced during a penetration operation. A logical extension of the visual examination, this method makes it possible to detect discontinuities opened to the surface of the controlled part in the form of colored or... Continue Reading
  • Type:Project
  • ID:MCE0162
  • Pages:9
  • Reference:YES
ABSTRACT The study explored the prospects and challenges in the informal auto-mechanic sector focusing on auto-mechanics enterprises within the Kumasi Metropolis. Specifically, the study sought to examine the prospects of the auto-mechanic enterprises, examine the challenges facing auto-mechanic enterprises, and the preparedness of auto-mechanics... Continue Reading
  • Type:Project
  • ID:MCE0161
  • Pages:85
  • Reference:YES
The fast growing and developing population of the world is so busy that instant food noodles are gaining ground for both humans and domestic animals. Incidentally, the machines involved in the production of these food noddle extruders are imported which results in the depletion of our foreign exchange reserve. Consequently, there is a growing need... Continue Reading
  • Type:Project
  • ID:MCE0160
  • Pages:54
  • Reference:YES
odel with and Without Winglet Altab Hossain a *, Prithvi Raj Arora b , Ataur Rahman c , Abdul Aziz Jaafar b , A.K.M. Parvez Iqbal a a Department of Mechanical Engineering, University Industry Selangor, Jln Timur Tambahan, 45600 Batang Berjuntai, Selangor Darul Ehsan, Malaysia b... Continue Reading
  • Type:Project
  • ID:MCE0159
  • Pages:8
  • Reference:YES
ABSTRACT The fabrication of the solar dryer was successful and test were carried out for various performance comparisons such as No-load and Load performance of the dryer and direct sun drying comparison and noticeable differences was noticed in the final moisture content such that the maximum temperature recorded in the drying chamber and solar... Continue Reading
  • Type:Project
  • ID:MCE0158
  • Pages:109
  • Reference:YES
This project covers a study of the effect of seawater corrosion on 0.34% and 0.36% carbon steel compositions. Two (2) specimens (steel rods) of length 150mm (each) for both steel compositions were obtained. Out of each was gotten four (4) specimens of 10mm length, 10mm diameter and two (2) specimens of 50mm length, 10mm diameter. This yielded a... Continue Reading
  • Type:Project
  • ID:MCE0157
  • Pages:52
  • Reference:YES
PREFACE The electrical popcorn machine is a device for preparing especial popcorn for the human consumption. The device in produced to help the masses to be self valiance in this are of down trodden economy. This project work is divided into five chapters, chapter one; the introduction discusses the relevance of the project work, problems it is... Continue Reading
  • Type:Project
  • ID:MCE0156
  • Pages:32
  • Reference:YES
ABSTRACT The air of this project is to design and fabricate a bench shearing machine which can complete favorably with the imported ones. this machine is designed and fabricate, using our cheap and available materials. Some qualities such as durability, reliability and portability are guaranteed. It is functional and can cut or shear a metal of up... Continue Reading
  • Type:Project
  • ID:MCE0155
  • Pages:39
  • Reference:YES
ABSTRACT This Nylon sealing and cutting machine has an added advantage of making 800 sealed bags per hour. The constructional machines were sourced locally. The machine can cut and seal Nylon at a affordable cost. The constructional size of 31 cm x 7.5cm x 12.4 which comprises the following component. The sealing and cutting filament, the... Continue Reading
  • Type:Project
  • ID:MCE0154
  • Pages:23
  • Reference:YES
ABSTRACT This report covers all activities candied out to rehabilitate a faulty refrigerator. First and foremost, we diagnosed the faulty refrigerator using the basic instruments to know the faults. After which we bought the necessary standard items that caused the fault.  We then started work on it by replacing necessary instruments.  We... Continue Reading
  • Type:Project
  • ID:MCE0153
  • Pages:34
  • Chapters:7
  • Methodology:Scientific
  • Reference:YES
ABSTRACTS The fabrication of a pressurized kerosene oven. This project has been fabricated with special economical needs for the small scale baking industries, wholesalers and distributors who import this type of baking oven from outside the country to supply the customers who wish to use it or those that cannot after gas oven can be used in... Continue Reading
  • Type:Project
  • ID:MCE0152
  • Pages:39
  • Reference:YES
ABSTRACT FLUSHING OF THE CONDENSER The refrigerant gas let into the condenser through the compressor and the vacuum pump was connected to the condenser to absorb dirty. REFILLING OF GAS INTO THE COMPRESSOR Gas was refilled into the compressor due to shortage of gas and it was filled inside the charging value and refrigerant. CHANGING OF DRIVER... Continue Reading
  • Type:Project
  • ID:MCE0151
  • Pages:20
  • Reference:YES
ABSTRACT The project is about fabrication of wheel-barrow, which is fabricated in Mechanical Engineering workshop in Institute of Management and Technology, Enugu. The report comprises seven chapters. Chapter one is about the introduction of the wheel. Chapter two is about the literature review, chapter three is about the material selection and... Continue Reading
  • Type:Project
  • ID:MCE0150
  • Pages:27
  • Reference:YES
ABSTRACT Knowledge could only be obtained successively by the use of books for research. This can be achieved only by preserving books already purchased. As a result we fabricate a metallic shelf made up of metallic sheet. Precisely mild steel sheets. The mild steel used for the fabrication of the shelf is 1.5mm (16gauge) mild steel. The shelf is... Continue Reading
  • Type:Project
  • ID:MCE0149
  • Pages:26
  • Reference:YES
ABSTRACT This project aims at designing and constructing a book metallic shelf hose capability will be to contain different standard sizes of books at minimum paces. What is taken into consideration in this project are the cost of its production, processes, and maintenance. Other considerable factors are the functional aspect of the... Continue Reading
  • Type:Project
  • ID:MCE0148
  • Pages:37
  • Reference:YES
ABSTRACT In the society at large Technology is fast replacing the crude method of carrying out work and has been making room for employment. Besides, it has also caught the attention of the youths who will prefer to work in a company with technological operations than one with man-power operations. This project can be used to convey materials... Continue Reading
  • Type:Project
  • ID:MCE0147
  • Pages:46
  • Reference:YES
ABSTRACT Construction of a potable electric operated motor vehicle for long Volvo Bus. In this project involves the knowledge of mechanical engineering workshop technology and engineering material science and strength. This was exactly what we were taught. We contracted the electric car with the actual dimension of long Volvo bus(Ml-) got from the... Continue Reading
  • Type:Project
  • ID:MCE0146
  • Pages:28
  • Reference:YES
ABSTRACT This write up is a detain of the process and formulation of plan for the physical realization of the construction of a mobile cooking system. It as divided into chapters, which discussed extensively the practical refrigerator cycle with attention given to constriction factors, working principle and choice of materials. The method used in... Continue Reading
  • Type:Project
  • ID:MCE0145
  • Pages:43
  • Reference:YES
PREFACE Our purpose of embarking on the construction of a project of this kind to present a very vivid and understandable fact that if given the necessary supports, that we the youths and engineers in potentials can more this country forward as regards to technical know how. Such a bird eye view right from time immemorial had proved that lot of... Continue Reading
  • Type:Project
  • ID:MCE0144
  • Pages:31
  • Reference:YES
ABSTRACT An electric popcorn machine is machine that is used to popcorn for human consumption. It uses electricity as it sources of energy, transfer it energy, that is used to pop the Corn. Also it has a stirrer, which rotate due to the convection of electrical energy from the source to mechanical energy in the motor, the stirrer tons the corn so... Continue Reading
  • Type:Project
  • ID:MCE0143
  • Pages:26
  • Reference:YES
ABSTRACT Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print depends on the impressed pressure the working temperature and the gold foil print paper life expectancy. Also studies were he manner of dependence of these parameters on prints impressed on sheets of varied thickness. The... Continue Reading
  • Type:Project
  • ID:MCE0142
  • Pages:55
  • Reference:YES
ABSTRACT. A machine for corn Sheller is highly and greatly needed for consistence of usage of corn in local and international levels. With regards to this indispensable need, a corn-shelling machine is designed which operates to remove the corn grains and leaving the cobs intact. In attainment to this design objective and aims, a proper... Continue Reading
  • Type:Project
  • ID:MCE0141
  • Pages:48
  • Reference:YES
ABSTRACT The aim of the project is to construct a domestic grain grinding machine to be powered by electric motor through pulley and belt transmission. The project is to perform mostly blending and grinding on grains e.g beans, maize, melon, millet and such other food crops. In construction of the project, there are various factors that is being... Continue Reading
  • Type:Project
  • ID:MCE0140
  • Pages:39
  • Chapters:5
  • Methodology:nil
  • Reference:YES
ABSTRACT The candle molding machine is a vital device which cannot be done without, in any nation. This is because of the indispensable role candle plays, especially when there is no either source of light. In order to enhance adequate supply to both urban and rural consumers, the production of a candle molding machine is important. The major... Continue Reading
  • Type:Project
  • ID:MCE0139
  • Pages:54
  • Reference:YES
ABSTRACT Stop clocks are devices for indicating time duration for the occurrence of two events after a passage of time. They are usually powered by batteries and they measure time in unit of seconds. Most clocks stop working as a result of the inability of the main spring to make a complete revolution. Also problems that do arise in clocks and... Continue Reading
  • Type:Project
  • ID:MCE0138
  • Pages:27
  • Reference:YES
ABSTRACT The project work “Construction of standard steel cupboard” was constructed at the mechanical workshop. During the construction, various hand and machinery tools (equipment) such as electric welding machine, hammers, guillote, folding machine, spraying machine, milling machine, steel rule, hard saw, center punch, scribbers,... Continue Reading
  • Type:Project
  • ID:MCE0137
  • Pages:35
  • Reference:YES
ABSTRACT The sets of seizes with shocker which was fabricated and assembled in the chemical engineering pilot plant was aimed at providing the students with a machine that will aid them in practical involving the separation of solid particles. Besides this, it was also fabricated sizes or diameter of the solid particles of a substance by allowing... Continue Reading
  • Type:Project
  • ID:MCE0136
  • Pages:43
  • Reference:YES
ABSTRACT The aim of this project was to construct shell and tube heat exchanger with fixed boundless. A heat exchanger that would cool 5 x 5 x 10 – 3 kg/s of steam at a calculated heat load of 152 – 395/S was fabricated. The steam is to reach the heat exchanger from a distillation column at a temperature of 300k. The specification of... Continue Reading
  • Type:Project
  • ID:MCE0135
  • Pages:43
  • Reference:YES
ABSTRACT Propeller agitator is a specialized of various types of substances. It consists of three basic components which are the shaft, blade and the vessel. In the construction, mild steel was chosen due to it’s inherent properties. After the procurement, the following constructional operations were carried out which included marking out,... Continue Reading
  • Type:Project
  • ID:MCE0134
  • Pages:44
  • Reference:YES
ABSTRACT This project is concerned with the fabrication of as a single face pressurized kerosene cooker. The report shows the possible way in which the above mentioned can be designed, fabricated and maintained. Its also shows the strength and properties of the materials it is made of. Defects of the equipment can come through inability to... Continue Reading
  • Type:Project
  • ID:MCE0133
  • Pages:25
  • Reference:YES
ABSTRACT This work on the construction and fabrication of a mobile deep freezer revolves around the concept of refrigeration. The concept of refrigeration revolves around the reverse Carnot cycle. This is a cycle involving isentropic expansion (at the throttling valve), isothermal expansion (at the evaporator), isentropic compression (at the... Continue Reading
  • Type:Project
  • ID:MCE0132
  • Pages:81
  • Reference:YES
ABSTRACT Mechanical Engineering Department of the named Institute has many non – operational malhiues. Sequel to the fact, maintenance was poorly excuted which resulted to the breakdown deep freezer. Quality and effectiveness of machine maintenance were well observed. Also, a minimized maintenance and a highly successful repair was adopted.... Continue Reading
  • Type:Project
  • ID:MCE0131
  • Pages:39
  • Reference:YES
ABSTRACT Books are used recoding of what is happening or event that has already taken place which can be storing information it is useful and for the information that such books contained not to cost it support to be properly kept and these can be done when those books are kept in a cool dry place and a place free from rodents and insects attacked... Continue Reading
  • Type:Project
  • ID:MCE0130
  • Pages:21
  • Reference:YES
ABSTRACT This work is an attempt evolve a quicker and easier method of achieving Transportation. This will no doubt save considering human labour and time wasted involved in traditional manual method of transportation. To achieve this, preliminary experiment was first carried out to determine the optimum speed of the motor vehicle. Various design... Continue Reading
  • Type:Project
  • ID:MCE0129
  • Pages:51
  • Reference:YES
ABSTRACT This work investigated the variation of top loss heat transfer coefficient with the emittance of the absorber plate, the collector tilt angle and air gap spacing between the absorber plate and the cover plate. The effects of the emittance of the absorber plate, the collector tilt angle and air gap spacing between the plate and the cover... Continue Reading
  • Type:Project
  • ID:MCE0128
  • Pages:157
  • Reference:YES
ABSTRACT This is an abstract on the construction of a packed distillation column. A packed distillation column is used in the separating process distillation that is the separation of two miscible liquids. It was constructed by marking out the dimension of the column, condenser, pot, using steel rule scriber, oxyacetylene flame was used for... Continue Reading
  • Type:Project
  • ID:MCE0127
  • Pages:59
  • Reference:YES
ABSTRACT Wheelbarrow is a simple machine, which belong to the second-class lever. This is because the load or resistance is placed between the effort and the fulcrum. It is used in many areas of work to convey loads that are too heavy or bulky to be carried by hand. Wheelbarrow can be used as farm equipment, industrial equipment among others.... Continue Reading
  • Type:Project
  • ID:MCE0126
  • Pages:48
  • Reference:YES
ABSTRACT The constructional project involved the construction of an industrial barrow of standard size was constructed. The process used went across various Engineering practice. These involved the procurement of galvanized steel of 0.00mm to 300mm thickness. Some galvanized steel rods and pipes were also used for the construction. The Engineering... Continue Reading
  • Type:Project
  • ID:MCE0125
  • Pages:21
  • Reference:YES
ABSTRACT The project title “fabrication of flow nozzle” was done by a selected group of Engineering Students and the practiced objective (aim) of the project was centered on constructing a nozzle that is capable of transporting fluid from one to the other, to determine the charge in velocity of the moving fluid across two given areas... Continue Reading
  • Type:Project
  • ID:MCE0124
  • Pages:45
  • Reference:YES
ABSTRACT A book shelve is a structure which here series of compartments for the preservation of books, valuable or useful materials, which are made up of metal, wood or plastic materials of construction. (Engineering materials). The book shelve was constructed in the institute. (I.M.T Enugu). However, before the construction, two standard metal... Continue Reading
  • Type:Project
  • ID:MCE0123
  • Pages:39
  • Reference:YES
ABSTRACT This project is a fabrication of a standard drawing writing desk using the cheapest, effective and most readily available materials. Method of maintenance and services were also taken into consideration. The functional aspect of the equipment was also given adequate consideration in the project work. Also take into consideration the... Continue Reading
  • Type:Project
  • ID:MCE0122
  • Pages:28
  • Reference:YES
ABSTRACT The need for an authentic and reliable report relating to the repairs and rehabilitation of a faulty air-conditioner is inevitable. Many homes and offices uses the air-conditioner to cool he temperature in their respective homes. So the maintenance of the air-conditioner should be a top priority of every individual in order to avoid huge... Continue Reading
  • Type:Project
  • ID:MCE0121
  • Pages:52
  • Reference:YES
ABSTRACT This work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing. This will no doubt save considerable human labours and time wastage involved in conventional method of drying the spent grains by spreading on the ground. It also saves as a means of employments for our teaming population.... Continue Reading
  • Type:Project
  • ID:MCE0120
  • Pages:59
  • Reference:YES
ABSTRACT The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint. The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer, which is driven by an electrically made device, a... Continue Reading
  • Type:Project
  • ID:MCE0119
  • Pages:41
  • Reference:YES
ABSTRACT This project is concern about the construction of an electrical stove with three oven apartment is described in his project. It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternative means to replace the use of keroseneand gas for cooking and drying which are often... Continue Reading
  • Type:Project
  • ID:MCE0118
  • Pages:28
  • Reference:YES
ABSTRACT Man’s impact on global environment system especially in the area of dust extraction is now at a scale where it is disrupting. These dust extractors varies in major ways. The environmental degradation is, in turn contributing to health threat in this part of the globe. Unfortunately most factories, workshops which suppose to posses... Continue Reading
  • Type:Project
  • ID:MCE0117
  • Pages:39
  • Reference:YES
ABSTRACT Bookshelf, a Mechanical arrangement of materials were documents are stored, it could be made with metal or wood. But this one is fabricated with metal. The type of metal used in the fabrication is mild steel and square baluters. The undismountable bookshelf which has five partitions and four compartment under went many process namely, the... Continue Reading
  • Type:Project
  • ID:MCE0116
  • Pages:24
  • Reference:YES
ABSTRACT This machine is meant for sealing and cutting of nylon bag of different sizes. This machine is operated with electrical system. This machine can cut and seal nylon of different sizes. It also comprises of materials as follows: Mechanical and Electrical section Mechanical section include the frame structure, lever and the pedal mechanism.... Continue Reading
  • Type:Project
  • ID:MCE0115
  • Pages:39
  • Reference:YES
ABSTRACT This write up is a detail of the process and formulation of plan for the physical realization of the construction of a refrigerator. It is divided into chapter, which discussed extensively the practical refrigeration cycle with full attention given to design factors, working principle and choice of material. The method used in... Continue Reading
  • Type:Project
  • ID:MCE0114
  • Pages:74
  • Chapters:5
  • Methodology:Scientific
  • Reference:YES
ABSTRACT When it comes to construction projects, landscaping work, and gardening, you need the right kind of equipment to finish tasks speedily and easily. One piece of equipment you would need is a motorised wheelbarrow. This is intended to carry bulky materials and heavy loads. There are a lot of equipments that can be used these days for... Continue Reading
  • Type:Project
  • ID:MCE0113
  • Pages:61
  • Reference:YES
ABSTRACT When it comes to construction projects, landscaping work, and gardening, you need the right kind of equipment to finish tasks speedily and easily. One piece of equipment you would need is a motorised wheelbarrow. This is intended to carry bulky materials and heavy loads. There are a lot of equipments that can be used these days for... Continue Reading
  • Type:Project
  • ID:MCE0112
  • Pages:60
  • Reference:YES
CHAPTER ONE 1.0 INTRODUCTION 1.1 Statement of the Problems 1.2 Objectives of the Study 1.3 Scope & Limitations of the study 1.4 Specifications the following abbreviations are used CHAPTER TWO LITERATURE REVIEW CHAPTER THREE MATERIALS AND METHOD CHAPTER FOUR DESIGN AND IMPLEMENTATION CHAPTER FIVE SUMMARY, CONCLUSION AND RECOMMENDATION... Continue Reading
  • Type:Project
  • ID:MCE0111
  • Pages:61
  • Reference:YES
ABSTRACT A 1.25KVA (2000W) inverter generator was designed, constructed and certified Ok. In this project, the design of the inverter generator is aimed at satisfying the need of converting, a D.C source of supply (12v battery) to an A.C voltage of 220v. The inverter range of output is between 200-220v. Since the inverter was designed to step-up... Continue Reading
  • Type:Project
  • ID:MCE0110
  • Pages:72
  • Reference:YES
ABSTRACT The main objective of this project was to ensure a proper security to car being parked in garage against theft or an intruder. The circuit uses three NE555 timers; one of the NE555 was wired as a monostable oscillator and remaining two were wired as tone generator and amplified to obtain a maximum audible sound. However, pin 2 of the... Continue Reading
  • Type:Project
  • ID:MCE0109
  • Pages:73
  • Reference:YES
ABSTRACT This write up focuses attention on a detailed report and account on the process of construction and formulation of plan for the actual and physical realization of the construction of the project work captioned fabrication and construction of a mobile cooling system. The report is therefore divided into chapters and each chapter discussed... Continue Reading
  • Type:Project
  • ID:MCE0108
  • Pages:57
  • Reference:YES
ABSTRACT An electric popcorn machine is machine that is used to popcorn for human consumption. It uses electricity as it sources of energy, transfer it energy, that is used to pop the Corn. Also it has a stirrer, which rotate due to the convection of electrical energy from the source to mechanical energy in the motor, the stirrer tons the corn so... Continue Reading
  • Type:Project
  • ID:MCE0107
  • Pages:24
  • Chapters:5
ABSTRACT This project has been fabricated with special economical needs for the small scale baking industries, wholesalers and distributors who import this type of baking oven from outside the country to supply the customers. Who wish to use it or those that cannot after gas oven can be used in baking any type of available within the tropics. It I... Continue Reading
  • Type:Project
  • ID:MCE0106
  • Pages:65
  • Chapters:5
CHAPTER ONE INTRODUCTION The project is a pre-requisite for the award of Higher National Diploma (HND) in Mechanical Engineering. The project “Design and fabrication a corn shelling machine” is indeed an essential one in a time like this when almost al human endeavour is embracing technology for efficiency and realiability. First a corn... Continue Reading
  • Type:Project
  • ID:MCE0105
  • Pages:65
  • Chapters:5
 ABSTRACT In this project, three alternative design solutions were considered for the foldable cam – bed. The authors utilize the local materials (with cost consideration) for the components. The merits and demerits of each of the alternative with respect to the considered group were also discusses and the solutions of the alternatives that... Continue Reading
  • Type:Project
  • ID:MCE0104
  • Pages:65
  • Chapters:10
  • Reference:YES
ABSTRACT             This project is concerned write the identification of those defects that are found in most of the drawing tables in the Mechanical Engineering drawing studio.             The report investigates the possible ways through which the mentioned above can be brought back to normal standard for usage ins the... Continue Reading
  • Type:Project
  • ID:MCE0103
  • Pages:34
  • Chapters:5
ABSTRACT The design and fabrication of a reciprocating nail gasket is a new innovation in technology. The one in existence is manually operated. In which a punch that is adjacent to a die is mounted to the handle  which  is attached to the shaft. A helical spring that is incorporated to the shaft of the punch, helps the handle return to its... Continue Reading
  • Type:Project
  • ID:MCE0102
  • Pages:65
  • Chapters:5
ABSTRACT             Parameters on which clear prints depends were comprehensively investigated.  The study revealed that clear print depends on the impressed pressure, the working temperature and the silver print paper.   Also studied were the manners of dependence of these parameters on prints impressed on sheets of varied... Continue Reading
  • Type:Project
  • ID:MCE0101
  • Pages:65
  • Chapters:5
ABSTRACT This work is an attempt to evolve a means for statically and dynamical balancing of mechanical components. This will no doubt evolve greater success in ensuring sound fabrication of our local machine and ensuring that life span of such machine is prolonged since vibration will be reduced to the bearest minimum. Every wheel and its shaft... Continue Reading
  • Type:Project
  • ID:MCE0100
  • Pages:65
  • Chapters:5
ABSTRACT Man’s imp act on global environment system especially in the area of dust extraction is now at a scale where it is disrupting.  These dust extractors varies in major ways. The environmental degration is, in turn contributing to health threat in this part of the globe.  Unfortunately most factories, workshops which suppose to posses... Continue Reading
  • Type:Project
  • ID:MCE0099
  • Pages:36
  • Chapters:5
  • Methodology:Scientific Method
  • Reference:YES
ABSTRACT             A machine for corn shelling is highly and greatly needed to consistency of usage of corn in local and international levels.             With regards to this indispensable needs, a corn shelling machine is designed which operates to remove the corn grains and leaving the cobs intact.... Continue Reading
TABLE OF CONTENT  CHAPTER ONE 1.1              Introduction                                                    1.2              Manual Digester                                             ... Continue Reading
  • Type:Project
  • ID:MCE0097
  • Pages:65
  • Chapters:5
  • Methodology:Scientific
  • Reference:YES
ABSTRACT             This project is constructed based on careful theoretical analysis of materials of chance and reasons for the selection of the materials.             The theoretical analysis of heat principles and temperatures of the different fervid which in solid stage should set in the mould were analyzed. The basic... Continue Reading
  • Type:Project
  • ID:MCE0096
  • Pages:65
  • Chapters:5
ABSTRACT             To achieve the aim of producing a functional and efficient wood lathe machine.  We analyzed and as well synthesized the different possible design solutions and concepts.  We carried out the analysis of different component part of the machine to determine their suitable dimensions based on loading and stresses due... Continue Reading
  • Type:Project
  • ID:MCE0095
  • Pages:65
  • Chapters:5
ABSTRACT This write up is a detain of the process and formulation of plan for the physical realization of the construction of a mobile cooking system. It as divided into chapters, which discussed extensively the practical refrigerator cycle with attention given to constriction factors, working principle and choice of materials. The method used in... Continue Reading
  • Type:Project
  • ID:MCE0094
  • Pages:65
  • Chapters:5
ABSTRACT This machine is meant for sealing and cutting of nylon bag of different sizes. This machine is operated with electrical system. This machine can cut and seal nylon of different sizes. It also comprises of materials as follows: Mechanical and Electrical section Mechanical section include the frame structure, lever and the pedal mechanism.... Continue Reading
  • Type:Project
  • ID:MCE0093
  • Pages:65
  • Chapters:5
ABSTRACT             Mechanical engineering department of the named institute has many non operational machines sequel to this fact maintenance which resulted to non development and non maintenance of the institute community at large.             By this fact the project (mechanical lawn mower) was constructed and design to... Continue Reading
  • Type:Project
  • ID:MCE0092
  • Pages:65
  • Chapters:5
ABSTRACT The journal bearing demonstration rig is an apparatus which is used to study how pressure would vary around the section of a journal bearing at various speed of the shaft and loading conditions. The design of the journal bearing was done by the use of standard design procedures carefully stated within this work. The frame, the journal... Continue Reading
  • Type:Project
  • ID:MCE0091
  • Pages:86
  • Chapters:5
ABSTRACT Man’s imp act on global environment system especially in the area of dust extraction is now at a scale where it is disrupting. These dust extractors varies in major ways. The environmental degration is, in turn contributing to health threat in this part of the globe. Unfortunately most factories, workshops which suppose to posses these... Continue Reading
  • Type:Project
  • ID:MCE0090
  • Pages:35
  • Chapters:5
ABSTRACT             The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint.             The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer,... Continue Reading
  • Type:Project
  • ID:MCE0089
  • Pages:65
  • Chapters:5
ABSTRACT            This project is concern about the construction of an electrical stove with three oven apartment is described in his project.  It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternat6ive means to replace the use of  kerosine and gas for cooking... Continue Reading
  • Type:Project
  • ID:MCE0088
  • Pages:65
  • Chapters:5
ABSTRACT This work is an attempt evolve a quicker and easier method of achieving Transportation. This will no doubt save considering human labour and time wasted involved in traditional manual method of transportation. To achieve this, preliminary experiment was first carried out to determine the optimum speed of the motor vehicle. Various design... Continue Reading
  • Type:Project
  • ID:MCE0087
  • Pages:65
  • Chapters:5
CHAPTER ONE 1.1 INTRODUCTION Nigeria’s economy has suffered a terrible setback over the year the common man finds it difficult to make for his livelihood, some people take pop-corn as one of their favorite food especially bachelors spinsters who can take pop-corn as super, breakfast and even lunch.  The University and Polytechnics graduate no... Continue Reading
  • Type:Project
  • ID:MCE0086
  • Pages:33
  • Chapters:5
ABSTRACT           The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint.           The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer, which is... Continue Reading
  • Type:Project
  • ID:MCE0085
  • Pages:65
  • Chapters:5
ABSTRACT This work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing. This will no doubt save considerable human labours and time wastage involved in conventional method of drying the spent grains by spreading on the ground. It also saves as a means of employments for our teaming population.... Continue Reading
  • Type:Project
  • ID:MCE0084
  • Pages:65
  • Chapters:5
ABSTRACT The need for an authentic and reliable report relating to the repairs and rehabilitation of a faulty air conditioner is inevitable.  The fact that many people use the air conditioner to cool the temperature in their respective home and offices make its maintenance a top priority to every individual in order to avoid huge expenditure in... Continue Reading
  • Type:Project
  • ID:MCE0083
  • Pages:65
  • Chapters:5
ABSTRACT           Propeller agitator is a specialized of various types of substances.  It consists of three basic components which are the shaft, blade and the vessel.           In the construction, mild steel was chosen due to it’s inherent properties.  After the procurement, the following constructional operations were... Continue Reading
  • Type:Project
  • ID:MCE0082
  • Pages:65
  • Chapters:5
CHAPTER ONE INTRODUCTION In this pass, cutting of grasses in the school, track or filed, Industries hotel, public centers, Agriculture lands etc. was done by machete or cutlass. This method of manual cutting not only was laborious but also time consuming as it is human effort that is entirely needed both for cutting and motion. There was also... Continue Reading
  • Type:Project
  • ID:MCE0081
  • Pages:65
  • Chapters:5
DESIGN AND MANUFACTURE OF A FUEL-LESS GENERATOR ABSTRACT The fuel-less generator is a flywheel energy storage system (FESS) which has attracted new research attention recently in applications like power quality, regenerative braking and uninterruptible power supply (UPS). As a sustainable energy storage method, flywheel energy storage has become a... Continue Reading
  • Type:Project
  • ID:MCE0080
  • Pages:65
  • Chapters:5
  • Methodology:Scientific
  • Reference:YES
ABSTRACT This project is focused on experimental analysis of impact of water jet on vanes. This work intends to predict the output of a pelton wheel, and to determine its optimum rotational speed. Hence this work explains how the deflection of the jet generates a force on the buckets, and how the force is related to the rate of momentum flow in... Continue Reading
  • Type:Project
  • ID:MCE0079
  • Pages:65
  • Chapters:5
ABSTRACT Metal Matrix Composites (MMC’s) have evoked a keen interest in recent times for potential applications. Composite materials like Particle-reinforced Aluminium Silicon carbide (Al/SiC) Metal-Matrix Composite is gradually becoming very important materials in manufacturing industries e.g. aerospace, automotive and automobile industries due... Continue Reading
  • Type:Project
  • ID:MCE0078
  • Pages:65
  • Chapters:5
ABSTRACT Steel is arguably the world’s most ‘advanced” material. It is a very versatile material with a wide range of attractive properties which can be produced at a very competitive cost. It has a diverse range of applications, and is second only to concrete in its annual production tonnage. Steel is not a new invention which leads to a... Continue Reading
  • Type:Project
  • ID:MCE0077
  • Pages:65
  • Chapters:5
INTRODUCTION The rapid development in the automobile and aircraft industries requires among other things, the integration of unique materials for design purposes that reduce fuel consumption to preserve the dwindling hydrocarbon resources without compromising other attributes such as safety, performance, recyclability and cost. Similarly, the... Continue Reading
  • Type:Project
  • ID:MCE0076
  • Pages:65
  • Chapters:5
ABSTRACT In this project (3) alternative design solutions were considered for the locally made electric run. The authors utilize the available local raw demerits of each alternative with respect to the considered group were discussed and the solutions of the alternative that best satisfied the limitations was selected for production. Material... Continue Reading
  • Type:Project
  • ID:MCE0075
  • Pages:65
  • Chapters:5
  TABLE OF CONTENTS Title Page                                                                                          ii Letter of Transmittal... Continue Reading
  • Type:Project
  • ID:MCE0074
  • Pages:33
  • Chapters:5
ABSTRACT In the mechanical engineering department of institute of management and technology there are many machines but it is not all that is functioning well. This may airless as a   result of lack of maintenance which is a prove in the breakdown of the air conditioner. The quality and effectiveness of materials were mated very well as referred... Continue Reading
  • Type:Project
  • ID:MCE0073
  • Pages:65
  • Chapters:5
Abstract Rapid prototyping is widely used to reduce time to market in product design and development. Today's systems are used by engineers to better understand and communicate their product designs as well as to make rapid tooling to manufacture those products. Computer Numerically Controlled (CNC) milling machines are part of this technology.... Continue Reading
  • Type:Project
  • ID:MCE0072
  • Pages:65
  • Chapters:5
ABSTRACT    This thesis aims to explore the theories and techniques behind procedures of developing a high precision cost-effective mini CNC milling machine. This newly designed machine tool can be widely used in electrical and medical industry for making small parts and engraving small features. Various structures were explored and compared... Continue Reading
  • Type:Project
  • ID:MCE0071
  • Pages:65
  • Chapters:5
ABSTRACT The need for an authentic and reliable report relating to the repairs and rehabilitation of a faulty air conditioner is inevitable.  The fact that many people use the air conditioner to cool the temperature in their respective home and offices make its maintenance a top priority to every individual in order to avoid huge expenditure in... Continue Reading
  • Type:Project
  • ID:MCE0070
  • Pages:65
  • Chapters:5
ABSTRACT     The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint.     The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer, which is driven by an electrically... Continue Reading
  • Type:Project
  • ID:MCE0069
  • Pages:65
  • Chapters:5
ABSTRACT This study has evaluated the effectiveness of metallic materials as chill in sand casting of aluminium alloy. Four plates of dimension 165mm x 80mm x10mm were cast using sand mould. Steel, copper and brass chills in form of cylindrical bar of geometry 7mm in diameter and 50mm long were inserted, side by side at regular intervals of 30mm... Continue Reading
  • Type:Project
  • ID:MCE0068
  • Pages:65
  • Chapters:5
  • Methodology:Scientific Method
  • Reference:YES
ABSTRACT The performance of the oils selected in this work was tested for considering Viscosity, Viscosity Index, Density, Flash Point, Pour Point, and Carbon Residue. The most important of all the properties which makes the oil protect against wear is viscosity that helps to reduce friction between moving parts in the engine. The Viscosities of... Continue Reading
  • Type:Project
  • ID:MCE0067
  • Pages:65
  • Chapters:5
ABSTRACT Theaim of this study is to investigate why the implementation of Unity and Efficiency in Production(UEP)is not yielding the expected results in PAN. The overall operations, production and sales are still on the low trend.This survey examined how the adaptation of UEP tools and the level of functions integration relate to the overall... Continue Reading
  • Type:Project
  • ID:MCE0066
  • Pages:65
  • Chapters:5
ABSTRACT The study examined the effects of faulty design and construction on the maintenance of building. A survey of randomly selected samples of 20 builders and 15 architects were conducted. Questionnaires were used to collect data from Architects and Builders. The survey included 11 groups of defects and sub defects in each groups. The... Continue Reading
  • Type:Project
  • ID:MCE0065
  • Pages:65
  • Chapters:5
ABSTRACT This research centers on the design, development and testing of a motorizedjuiceextractor fabricated using locally-available materials. The machine is made essentially of two basic compartments: the chopping compartment and the juice extracting compartment. Other components include feeding hoppers, top cover, auger conveyor housed in a... Continue Reading
  • Type:Project
  • ID:MCE0064
  • Pages:75
  • Chapters:5
  • Methodology:Scientific
  • Reference:YES
ABSTRACT Five coal samples from Odagbo (Kogi State), Owukpa (Benue State), Ezimo (Enugu State), Amansiodo (Enugu State) and Inyi (Enugu State) weresubjected to proximate analysis, ultimate analysis, calorific value determination, petrographic and thermogravimetric analysis to determine their suitability for power generation. Tests were carried out... Continue Reading
  • Type:Project
  • ID:MCE0063
  • Pages:65
  • Chapters:5
ABSTRACT The physical presence of the oil industry in Nigeria is so large and has resulted in a lot of activities in the upstream sector which has deleterious effects on ecosystem stability and local biodiversity – which the peoples‘ livelihoods depend upon. This research provides an overview of environmental issues in the oil and gas industry... Continue Reading
  • Type:Project
  • ID:MCE0062
  • Pages:65
  • Chapters:5
Abstract A solar ovenis a device that converts solar energy into useful heat in a confined space (oven chamber) which can be utilised for cooking and baking purposes.The oven consists of plane reflectors to concentrate the solar radiation on the collector.The heat gain is maximum if the collector and reflectors are continuously adjusted such... Continue Reading
  • Type:Project
  • ID:MCE0061
  • Pages:65
  • Chapters:5
ABSTRACT Thermal electrical power generation is one of the major methods used in Egbin thermal station. Due to inconsistency and failure in the power supply in Nigeria, there is a need for a proper operation and maintenance schedule strategy of the various kinds of power plants accessories so as to facilitate their efficiencies and functionality.... Continue Reading
  • Type:Project
  • ID:MCE0060
  • Pages:65
  • Chapters:5
ABSTRACT Knowledge could only be obtained successfully by the use of book for research but unfortunately because of hard times, books have become very expensive.  This is called for presentation of books already purchased whether in the library or on the household so that it can be used by the future generation.  There could only be done by... Continue Reading
  • Type:Project
  • ID:MCE0059
  • Pages:50
  • Chapters:5
ABSTRACT           The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint.           The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer, which is... Continue Reading
  • Type:Project
  • ID:MCE0058
  • Pages:50
  • Chapters:5
ABSTRACT In this project, three alternative design solutions were considered for the foldable cam – bed. The authors utilize the local materials (with cost consideration) for the components. The merits and demerits of each of the alternative with respect to the considered group were also discusses and the solutions of the alternatives that best... Continue Reading
  • Type:Project
  • ID:MCE0057
  • Pages:50
  • Chapters:5
ABSTRACT This machine is meant for sealing and cutting of nylon bag of different sizes. This machine is operated with electrical system. This machine can cut and seal nylon of different sizes. It also comprises of materials as follows: Mechanical and Electrical section Mechanical section include the frame structure, lever and the pedal mechanism.... Continue Reading
  • Type:Project
  • ID:MCE0056
  • Pages:50
  • Chapters:5
ABSTRACT In our society today reading and writing has taken its roll as a way of measuring human knowledge.  Knowledge could only be obtain successively by the use of books for research but unfortunately because of hard time, books have because very expensive. This has called for preservation of books already purchased, whether in the public... Continue Reading
  • Type:Project
  • ID:MCE0055
  • Pages:50
  • Chapters:5
ABSTRACT           Parameters on which clear prints depends were comprehensively investigated.  The study revealed that clear print depends on the impressed pressure, the working temperature and the silver print paper.   Also studied were the manners of dependence of these parameters on prints impressed on sheets of varied... Continue Reading
  • Type:Project
  • ID:MCE0054
  • Pages:50
  • Chapters:5
ABSTRACT Mechanical engineering department of the named institute has many non operational machines sequel to this fact maintenance which resulted to non development and non maintenance of the institute community at large.           By this fact the project (mechanical lawn mower) was constructed and design to help in the development and... Continue Reading
  • Type:Project
  • ID:MCE0053
  • Pages:50
  • Chapters:5
ABSTRACT This project covers the design and fabrication of an office file cabinet. The cabinet is to keep and secure files and document for future record. With the four drawers, it has a storing capacity of over a thousand files. Detail design of the cabinet, material selection were carried out. This cabinet is mainly for office use. CHAPTER ONE... Continue Reading
  • Type:Project
  • ID:MCE0052
  • Pages:50
  • Chapters:5
ABSTRACT This study tend to investigate the effect of synthetic and natural moulding sand on casting of flange like component.  In this study FUTA logo was selected to be cast using aluminium metal. The casting was carried out and the result was analysed according to the quality of casting. It was discovered that for large size component using... Continue Reading
  • Type:Project
  • ID:MCE0051
  • Pages:50
  • Chapters:5
THE DESIGN AND FABRICATION OF A IRON SHELLING MACHINE ABSTRACT. A machine for corn Sheller is highly and greatly need for consistence of usage of corn in local and international levels. With regards to this indispensable need, a corn-shelling machine is designed which operates to remove the corn grains and leaving the cobs intact. In attainment to... Continue Reading
  • Type:Project
  • ID:MCE0050
  • Pages:47
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT The aim of the project is to construct a domestic grain grinding machine to be powered by electric motor through pulley and belt transmission. The project is to perform mostly blending and grinding on grains e.g beans, maize, melon, millet and such other food crops. In construction of the project,... Continue Reading
  • Type:Project
  • ID:MCE0049
  • Pages:39
  • Chapters:6
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT An electric popcorn machine is machine that is used to popcorn for human consumption. It uses electricity as it sources of energy, transfer it energy, that is used to pop the Corn. Also it has a stirrer, which rotate due to the convection of electrical energy from the source to mechanical energy in the motor,... Continue Reading
  • Type:Project
  • ID:MCE0048
  • Pages:24
  • Chapters:4
  • Methodology:Descriptive
  • Reference:YES
DESIGN AND CONSTRUCTION OF A METALLIC BOOK SHELF ABSTRACT This project aims at designing and constructing a book metallic shelf hose capability will be to contain different standard sizes of books at minimum paces. What is taken into consideration in this project are the cost of its production, processes, and maintenance. Other considerable... Continue Reading
  • Type:Project
  • ID:MCE0047
  • Pages:39
  • Chapters:5
  • Methodology:Descriptive
  • Reference:YES
ABSTRACT Construction of a potable electric operated motor vehicle for long Volvo Bus. In this project involves the knowledge of mechanical engineering workshop technology and engineering material science and strength. This was exactly... Continue Reading
  • Type:Project
  • ID:MCE0046
  • Pages:28
  • Chapters:7
  • Methodology:Descriptive
  • Reference:YES
ABSTRACTS This project has been fabricated with special economical needs for the small scale baking industries, wholesalers and distributors who import this type of baking oven from outside the country to supply the customers. Who wish to use it or those that cannot after gas oven can be used in... Continue Reading
  • Type:Project
  • ID:MCE0045
  • Pages:34
  • Chapters:8
  • Methodology:scientific analysis
  • Reference:YES
CONSTRUCTION OF A SCREW CONVEYOR WITH A SINGLE PHASE ELECTRIC MOTOR TABLE OF CONTENT CHAPTER ONE 1.1 Introductions 1.2 Description of the screw conveyor CHAPTER TWO 2.1 Mode of operation 2.2 Material selections CHAPTER THREE 3.1 design 3.2 design analysis 3.3 principle of operation 3.4 capacity of the screw conveyor 3.5 sequence of operation/... Continue Reading
  • Type:Project
  • ID:MCE0044
  • Pages:46
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT Children swing plays a unique role in the live and upbringing of a child. It makes children to avoid dangerous games thereby providing them on opportunity for proper relaxation. The children swing consists of a cost iron metal that is welded with a chain and set that makes children move to and fro... Continue Reading
  • Type:Project
  • ID:MCE0043
  • Pages:32
  • Chapters:7
  • Methodology:scientific analysis
  • Reference:YES
DESIGN AND FABRICATION OF MOBILE DEEP FREEZER ABSTRACT This wrote up is a detail of the processes for the physical realization of the design and construction of mobile deep freezer. It is divided into chapters which discussed expensively the practical refrigeration cycle with rull attention given to design factors working principals and choice of... Continue Reading
  • Type:Project
  • ID:MCE0042
  • Pages:35
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print depends on the impressed pressure the working temperature and the gold foil print paper life expectancy. Also studies were he manner of dependence of these parameters on prints... Continue Reading
  • Type:Project
  • ID:MCE0041
  • Pages:54
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
CHAPTER ONE INTRODUCTION The project is a pre-requisite for the award of Higher National Diploma (HND) in Mechanical Engineering. The project “Design and fabrication a corn shelling machine” is indeed an essential one in a time like this when almost al human endeavour is embracing technology for... Continue Reading
  • Type:Project
  • ID:MCE0040
  • Pages:54
  • Chapters:6
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT In this project, three alternative design solutions were considered for the foldable cam – bed. The authors utilize the local materials (with cost consideration) for the components. The merits and demerits of each of the alternative with respect to the considered group were also discusses and the... Continue Reading
  • Type:Project
  • ID:MCE0039
  • Pages:36
  • Chapters:10
  • Methodology:Descriptive
  • Reference:YES
ABSTRACT This project is concerned write the identification of those defects that are found in most of the drawing tables in the Mechanical Engineering drawing studio. The report investigates the possible ways through which the mentioned above can be brought back to normal standard for usage... Continue Reading
  • Type:Project
  • ID:MCE0038
  • Pages:35
  • Chapters:8
  • Methodology:Descriptive
  • Reference:YES
PRAFACE Based the fact, for humans quest to belted and secure things he uses and have them arranged in place without being transfer, like the files tea books, important to man for future wage and academic excel. To this end, in which this written articles need to be presented, we embarked on the... Continue Reading
  • Type:Project
  • ID:MCE0037
  • Pages:33
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
CONSTRUCTION OF A STANDARD BANKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELECTRIC/GAS) ABSTRACT This project is designed to make the students utilize as many theoretical and practical concept as have been instructed in alstron to mechanical engineering workshop technology. Students are expected to learn and apply concepts, principles about... Continue Reading
  • Type:Project
  • ID:MCE0036
  • Pages:41
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT The design and fabrication of a reciprocating nail gasket is a new innovation in technology. The one in existence is manually operated. In which a punch that is adjacent to a die is mounted to the handle which is attached to the shaft. A helical spring that is incorporated to the... Continue Reading
  • Type:Project
  • ID:MCE0035
  • Pages:40
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT Parameters on which clear prints depends were comprehensively investigated. The study revealed that clear print depends on the impressed pressure, the working temperature and the silver print paper. Also studied were the manners of dependence of these parameters on prints impressed on... Continue Reading
  • Type:Project
  • ID:MCE0034
  • Pages:46
  • Chapters:8
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT This project which is on the design and fabrication of a two face gas burner is a brief exploration on the various ways and means of designing, construction, operating the two face gas burner, putting cost into consideration for economic advantage. Herein are brief information and literature on gas... Continue Reading
  • Type:Project
  • ID:MCE0033
  • Pages:32
  • Chapters:7
  • Methodology:scientific analysis
  • Reference:YES
REPAIR OF DEEP FREEZER ABSTRACT This work gives an account of all activities carried out to restore a faulty and abandoned deep freezer to normal functioning. This report therefore contains the different stages embarked in the execution of the project. These include the literature back ground, checking’s conducted, cleaning, repair operations... Continue Reading
  • Type:Project
  • ID:MCE0032
  • Pages:37
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT This work is an attempt to evolve a means for statically and dynamical balancing of mechanical components. This will no doubt evolve greater success in ensuring sound fabrication of our local machine and ensuring that life span of such machine is prolonged since... Continue Reading
  • Type:Project
  • ID:MCE0031
  • Pages:43
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT This work is aimed at designing and fabricating a spin dryer which can be used in drying spent grains after brewing. This will no doubt save considerable human labours and time wastage involved in conventional method of drying the spent grains by spreading on the ground. It also saves as a means of... Continue Reading
  • Type:Project
  • ID:MCE0030
  • Pages:62
  • Chapters:7
  • Methodology:scientific analysis
  • Reference:YES
TABLES OF CONTENT CHAPTER ONE 1.1 Introduction 1.2 Description of the Design Melon 1.3 Principles of Operation 1.4 Advantages 1.5 Objectives 1.6 Scope 1.7 Beneficiaries CHAPTER TWO 2.1 Review of Some Properties 2.2 Some Local Variety of Melon Used 2.3 Manual De-Husking 2.4 Singular Method of Manual... Continue Reading
  • Type:Project
  • ID:MCE0029
  • Pages:64
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT Man’s imp act on global environment system especially in the area of dust extraction is now at a scale where it is disrupting. These dust extractors varies in major ways.The environmental degration is, in turn contributing to health threat in this part of the globe. Unfortunately most... Continue Reading
  • Type:Project
  • ID:MCE0028
  • Pages:34
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT This project is concern about the construction of an electrical stove with three oven apartment is described in his project. It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternat6ive means to replace the... Continue Reading
  • Type:Project
  • ID:MCE0027
  • Pages:25
  • Chapters:4
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT In our society today reading and writing has taken its roll as a way of measuring human knowledge. Knowledge could only be obtain successively by the use of books for research but unfortunately because of hard time, books have because very expensive. This has called for preservation of... Continue Reading
  • Type:Project
  • ID:MCE0026
  • Pages:33
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint. The project cut across all forms of engineering, such as mechanical machine... Continue Reading
  • Type:Project
  • ID:MCE0025
  • Pages:39
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT This work is an attempt to evolve a quicker and easier method of achieving cylindrical shape object from a work price. This will no double save considerable human labour and time wastage involved in traditional manual method of carving. To achieve this preliminary experiment was carried out... Continue Reading
  • Type:Project
  • ID:MCE0024
  • Pages:48
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT The need for an authentic and reliable report relating to the repairs and rehabilitation of a faulty air-conditioner is inevitable. Many homes and offices uses the air-conditioner to cool he temperature in their respective homes. So the maintenance of the air-conditioner should be a top... Continue Reading
  • Type:Project
  • ID:MCE0023
  • Pages:48
  • Chapters:6
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT A machine for corn shelling is highly and greatly needed to consistency of usage of corn in local and international levels. With regards to this indispensable needs, a corn shelling machine is designed which operates to remove the corn grains and leaving the cobs intact. In attainment to... Continue Reading
  • Type:Project
  • ID:MCE0022
  • Pages:60
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
TABLE OF CONTENT CHAPTER ONE 1.1 Introduction 1.2 Manual Digester 1.3 Motorized Digester 1.4 Types of Motorized Digester CHAPTER TWO 2.1 Literature Review 2.2 Mutter Way Digester 2.3 Vertical Type 2.4 Horizontal Type 2.5.8 Specifications 2.6.1 Limitation of Space 2.6.2 Power Suppler 2.6 Material and... Continue Reading
  • Type:Project
  • ID:MCE0021
  • Pages:50
  • Chapters:4
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT The process involves in the design and fabrication of a creep testing equipment ranges from carrying out the feasibility studying of the project to be designed in terms of functionality. Since it is used in the testing of failure of material under loading different engineering materials... Continue Reading
  • Type:Project
  • ID:MCE0020
  • Pages:28
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT This write up is a detail of the process and information of plan for the physical realization of the construction of the 1M3 mobile deep freezer. It is divided into chapters, which discussed extensively the practical refrigeration cycle with full attention given to design factors... Continue Reading
  • Type:Project
  • ID:MCE0019
  • Pages:40
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT This project is constructed based on careful theoretical analysis of materials of chance and reasons for the selection of the materials. The theoretical analysis of heat principles and temperatures of the different fervid which in solid stage should set in the mould were... Continue Reading
  • Type:Project
  • ID:MCE0018
  • Pages:35
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT To achieve the aim of producing a functional and efficient wood lathe machine. We analyzed and as well synthesized the different possible design solutions and concepts. We carried out the analysis of different component part of the machine to determine their suitable dimensions based on loading... Continue Reading
  • Type:Project
  • ID:MCE0017
  • Pages:39
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT This project is concerned with the fabrication of as a single face pressurized kerosene cooker. The report shows the possible way in which the above mentioned can be designed, fabricated and maintained. Its also shows the strength and properties of the materials it is made of.... Continue Reading
  • Type:Project
  • ID:MCE0016
  • Pages:26
  • Chapters:7
  • Methodology:scientific analysis
  • Reference:YES
PREFACE Our purpose of embarking on the construction of a project of this type is to present a vivid and understandable fact that if given the necessary supports, that we the youth and Engineers in potentials can move this country forward as regards to technological endeavours. Such as bird eye-view right from... Continue Reading
  • Type:Project
  • ID:MCE0015
  • Pages:37
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:NO
PREFACE Our purpose of embarking on the construction of a project of this type is to present a vivid and understandable fact that if given the necessary supports, that we the youth and Engineers in potentials can move this country forward as regards to technological endeavours. Such as bird eye-view right from... Continue Reading
  • Type:Project
  • ID:MCE0014
  • Pages:37
  • Chapters:5
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT This write up is a detain of the process and formulation of plan for the physical realization of the construction of a mobile cooking system. It as divided into chapters, which discussed extensively the practical refrigerator cycle with attention given to constriction factors, working principle and... Continue Reading
  • Type:Project
  • ID:MCE0013
  • Pages:43
  • Chapters:6
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT This Nylon sealing and cutting machine has an added advantage of making 800 sealed bags per hour. The constructional machines were sourced locally. The machine can cut and seal Nylon at a affordable cost. The constructional size of 31 cm x 7.5cm x 12.4 which comprises the... Continue Reading
  • Type:Project
  • ID:MCE0012
  • Pages:24
  • Chapters:4
  • Methodology:Descriptive
  • Reference:YES
ABSTRACT Mechanical Engineering Department of the Institute of Management and Technology has many non – functional machines. This is caused as a result of poor maintenance culture, which in turn resulted to breakdown of the Deep Freezer under review.... Continue Reading
  • Type:Project
  • ID:MCE0011
  • Pages:25
  • Chapters:5
  • Methodology:Descriptive
  • Reference:YES
PREFACE A new machine/equipment will provide satisfactory service if kept in proper operating condition. The inevitability of less than 100% reliability of any machine/equipment after some period and maintenance. Also in system of any complexity, certain replacement adjustments are... Continue Reading
  • Type:Project
  • ID:MCE0010
  • Pages:35
  • Chapters:4
  • Methodology:Descriptive
  • Reference:YES
ABSTRACT This machine is meant for sealing and cutting of nylon bag of different sizes. This machine is operated with electrical system. This machine can cut and seal nylon of different sizes. It also comprises of materials as follows: Mechanical and Electrical section Mechanical section... Continue Reading
  • Type:Project
  • ID:MCE0009
  • Pages:39
  • Chapters:6
  • Methodology:scientific analysis
  • Reference:YES
ABSTRACT The aim of this project was to acquire the constructional and fabrication knowledge by we, the students of chemical engineering by constructing a steel bookshelf. This work exposed us to many things like material for engineering and their requirements. It also exposed us to other fields of engineering like... Continue Reading
  • Type:Project
  • ID:MCE0008
  • Pages:34
  • Chapters:5
  • Methodology:nil
  • Reference:YES
THE DESIGN AND FABRICATION OF A CANDLE MOULDING MACHINE ABSTRACT The idea of producing “candle stick” brought the existence of fabricating a “candle moulding machine” which can produce a desired shape of a candle foe the benefit of mankind. In chapter 1, which is the research work of the project carried out, the problem encountered and the... Continue Reading
  • Type:Project
  • ID:MCE0007
  • Pages:59
  • Chapters:5
  • Methodology:Descriptive method
  • Reference:YES
ABSTRACT The candle molding machine is a vital device which cannot be done without, in any nation. This is because of the indispensable role candle plays, especially when there is no either source of light. In order to enhance adequate supply to both urban and rural consumers, the... Continue Reading
  • Type:Project
  • ID:MCE0006
  • Pages:45
  • Chapters:6
  • Methodology:Descriptive method
  • Reference:YES
THE DESIGN AND CONSTRUCTION OF MINI RADIO BROADCAST TRANSMITTERAND AUDIO CONSOLE USING FREQUENCYMODULATION (FM) WITH POWER RATING OF 1 WATT ABSTRACT The early transmitter for radio broadcasting is so big and bulky that they do occupy numerous spaces. The circuitries are mainly designed with valves, which are big in sizes. With the advent of... Continue Reading
  • Type:Project
  • ID:MCE0005
  • Pages:91
  • Chapters:7
  • Methodology:Scientific Method
  • Reference:YES
ABSTRACT The construction of the callophane sealing machine was carried out. The project started with an encompassing review of the various methods of heat sealing film packages. The machine can be used in sealing both low, medium and high-density cellophane. The product has a heating element, which... Continue Reading
  • Type:Project
  • ID:MCE0004
  • Pages:63
  • Chapters:7
  • Methodology:Descriptive method
  • Reference:YES
CONSTRUCTION OF METAL SHARPENING AND DULLING DEVICE ABSTRACT As a result of modern development in Science and Technology, most of the large scale industrial used machine were now modernized to simple small and efficient machines. Some of these machines were either operated manually or the aid of electricity. For this reason, big metal sharpening... Continue Reading
  • Type:Project
  • ID:MCE0003
  • Pages:41
  • Chapters:5
  • Methodology:nil
  • Reference:YES
ABSTRACT Mechanical engineering department of the named institute has many non operational machines sequel to this fact maintenance which resulted to non development and non maintenance of the institute community at large. By this fact the project (mechanical lawn mower) was constructed and... Continue Reading
  • Type:Project
  • ID:MCE0002
  • Pages:53
  • Chapters:5
  • Methodology:Scientific Method
  • Reference:YES
CONSTRUCTION OF METAL SHARPENING AND DULLING DEVICE ABSTRACT As a result of modern development in Science and Technology, most of the large scale industrial used machine were now modernized to simple small and efficient machines. Some of these machines were either operated manually or the aid of electricity. For this reason, big metal sharpening... Continue Reading
  • Type:Project
  • ID:MCE0001
  • Pages:42
  • Chapters:5
  • Methodology:Scientific Method
  • Reference:YES