THE DESIGN AND CONSTRUCTION OF AUTOMATIC FENCE LIGHT CONTROLLER

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0142
  • Access Fee: ₦5,000 ($14)
  • Pages: 28 Pages
  • Format: Microsoft Word
  • Views: 948
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT 
The very fundamental reasons behind this project assignment is to expose student to the very important aspect of private and independent research work not only theories but also subsequent translation of the theoretical research work into a particular function system.
The project construction of automatic fence light controller has been done primarily as a photo type design it could be further modified suit the situation where it will be used e.g when used to activate an alarm the led could be  further modified to suit the situation where it will be used e.g when used to activate an alarm the led could be replaced with a relay and feedback resistor removed (for greater sensitivity)          
 
TABLE OF CONTENTS 
Title page
Approval 
Abstract 
Table of contents 
Acknowledgement

CHAPTER ONE 
1.1Introduction

CHAPTER TWO 
2.1 Description of components used
2.2 Integrated
2.3 Transistor 
2.4  Diode
2.5  Resistor
2.6  Variable resistor (preset)
2.7 Capacitor
2.8 Light dependent  resistor (LDR)
2.9  Relay
2.10  Transformer

CHAPTER THREE   
3.1Circuit drawing of the automatic fence light controller 
3.2Achieve function of the alto fence light controller 
3.3Rectification stage of the circuit 

CHAPTER FOUR 
4.1Principles of operation of the automatic fence light controller 
4.2Project component /materials cost & packaging 

CHAPTER FIVE 
5.1Test measurement and observation
5.2Conclusion and recommendation
5.3References.

THE DESIGN AND CONSTRUCTION OF AUTOMATIC FENCE LIGHT CONTROLLER
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0142
  • Access Fee: ₦5,000 ($14)
  • Pages: 28 Pages
  • Format: Microsoft Word
  • Views: 948

500
Leave a comment...

    Related Works

    CHAPTER ONE INTRODUCTION 1.1Background Information Electricity is a general term comprising of a variety of phenomena resulting from the presence and flow of electric charge. These include many phenomena, such as lightning, static... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1 Background Information Electricity is a general term comprising of a variety of phenomena resulting from the presence and flow of electric charge. These include many phenomena, such as lightning,... Continue Reading
    ABSTRACT  T-junction traffic light controller is such a device that will play a significant role in controlling traffic at junctions, to ease the expected increased rush at such junctions and reduce to minimum disorderliness that may arise, as well as allowing the pedestrians a right of the way at intervals rather than being struck down when in a... Continue Reading
    ABSTRACT:  A traffic light system is an electronic circuitry designed and configured to control the flow of the traffic (vehicular and human) at roads intersection without the physical presence of a traffic warden. This is made possible through the help of a signaling device which is mounted at roads intersection. It is achieved using... Continue Reading
    ABSTRACT As the name of the project implies “Automatic Emergency Light” is an electronic system that can provide light during emergency situations i.e when mains (NEPA) supply fails.  This system can provide enough light with full brightness in a given room or office.   The system makes use of white light emitting diodes for the lightings.... Continue Reading
    ABSTRACT As the name of the project implies “Automatic Emergency Light” is an electronic system that can provide light during emergency situations i.e when mains (NEPA) supply fails.  This system can provide enough light with full brightness in a given room or office.   The system makes use of white light emitting diodes for the lightings.... Continue Reading
    ABSTRACT In this project work, we are mostly concern about building a simple power streetlight which is automatically operated. There are four main components required to build a solar operated streetlight. The solar array, High efficiency D.C lamp section made by transistor, resistors, and the sensor LDR, changes controller which is made up of... Continue Reading
    ABSTRACT In this project work, we are mostly concern about building a simple power streetlight which is automatically operated. There are four main components required to build a solar operated streetlight. The solar array, High efficiency D.C lamp, changes controller and battery of which the solar array is the most expensive. It is the solar... Continue Reading
    . ABSTRACT In this project work, we are mostly concern about building a simple power streetlight which is automatically operated. There are four main components required to build a solar operated streetlight. The solar array, High efficiency D.C lamp section made by... Continue Reading
    ABSTRACT T-junction traffic light controller is such a device that will play a significant role in controlling traffic at junctions, to ease the expected increased rush at such junctions and reduce to minimum disorderliness that may arise, as well as allowing the... Continue Reading
    Call Us Get this work