PRODUCTION OF HIGH QUALITY FOAM

  • Type: Project
  • Department: Chemical Engineering
  • Project ID: CNG0204
  • Access Fee: ₦5,000 ($14)
  • Pages: 73 Pages
  • Format: Microsoft Word
  • Views: 816
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT

The production of high quality foam was carried.  The actualization of the production of polyurethane (fibre) foam was made possible by using the components / chemical raw materials such as polyol (polyurethes resin).  TDI (toluene di-Iso-cyanate, methylane chloride (MC)-(CH2CL).  Silicon oil, stannous octoate, calcum carbonate and water.

As a result of chemistry of polyurethane foams, properties of foams and fibre materials (physical, chemical, thermal and mechanical properties) gotten from the literature, review including the functions and reactions of the components proper formulation was made and conversions / translation to actual weights also done which lead to the production of the desired product. The experiment was done at ambient temperature of 320c following the normal procedures.

The foam produced is of very high density, good quality, durable and profitable. The densities of the various samples are 35kg/m3 and 40kg/m3.

As a result of poor storage conditions of the chemicals mentioned above here in the pilot plant, the stipulated and specified environmental conditions, there is a slight deviation of the foam from the international standard specification of 155. The foam produced is measured to standard and can be used for applied to any field of engineering and technology. They can be used for any purpose and is expected to last longer depending on the handling.
 
TABLE OF CONTENT
Title page
Approval page
Dedication
Acknowledgement 
Table of content
Abstract

CHAPTER ONE
1.0 Introduction 
1.1 Problem statement 
1.2 Aims and objectives of the project

CHAPTER TWO
2.0  Literature Review
2.1  Origin of foam
2.2  Structure of polyurethane 
2.3  Properties of polyurethane foam 
2.4  Classification of polyurethane
2.5  Flexible foam
2.6  Rigid foam
2.7  Basic chemistry of foam production
2.8  Polyurethane chemicals and functions
2.8.1Man chemicals
2.8.2Blowing agents
2.8.3Catalyst 
2.9  Foam stabilizers
2.10 Making / Agitation
2.11 Characteristic features of methyl come chloride 
2.12 Some possible faults, causes and their remedies.
2.13 Characteristics of fibre foams
2.14 Physical properties of foam polyurethane 
2.15 Thermal properties of polyurethane foams
2.16 Foam fibres applications
2.17 Factors that causes defect during process 

CHAPTER THREE
3.0  Foam formulation
3.1  The roles of chemicals in foaming reactors 
3.2  Determination of Chemical consumption rates 
3.2.1Water  
3.2.2Tohiene DI – Isocyate
3.2.3Blowing Agents
3.2.4Schlone
3.2.5Amine 
3.2.6Stannous actuate
3.2.7Colorant
3.3  Summary  of the formulation

CHAPTER FOUR
4.0  Production procedure / Analyses
4.1  Essential Raw Materials Used 
4.2  Procedures / methods
4.3  Experimental Results / Analysis
4.4  General Thermal properties
4.5  Chemical properties
4.6  Optical properties
4.7  Electrical properties
4.8  Permanence and service properties
4.9  Characteristic Test
4.10 Sampling and conditioning 
4.11 Storage and Handling of urethane raw materials 

CHAPTER FIVE
5.0  Discussion

CHAPTER SIX
6.0  Conclusion
6.1  Recommendation
6.2  Cost Analysis
6.3  References

PRODUCTION OF HIGH QUALITY FOAM
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Chemical Engineering
  • Project ID: CNG0204
  • Access Fee: ₦5,000 ($14)
  • Pages: 73 Pages
  • Format: Microsoft Word
  • Views: 816

500
Leave a comment...

    Related Works

    ABSTRACT A project was carried out to produce high quality liquid air refreshner for domestic uses. The project was carried out using the following apparatus. Beakers (250ML), one conical flask, hydrometer, thermometer, two – 5ml of measuring cylinders, one reactor (plastic reactor), stirrer, weighing balance. The chemicals used in the... Continue Reading
    ABSTRACT A project was carried out to produce high quality liquid air refreshner for domestic uses. The project was carried out using the following apparatus. Beakers (250ML), one conical flask, hydrometer, thermometer, two – 5ml of measuring cylinders, one reactor (plastic reactor), stirrer,... Continue Reading
    ABSTRACT. The sole aim of this research work is to produce a high quality of bar soaps and compare with detergent. The major aspects of this projects deals with quality control processes in the production of a high quality bar soaps. In soap production, cold process was used and this was found out to be the most effective means of production... Continue Reading
    ABSTRACT. The sole aim of this research work is to produce a high quality of bar soaps and compare with detergent. The major aspects of this projects deals with quality control processes in the production of a high quality bar soaps. In soap production, cold process was used and this was found out to be the most effective means of production... Continue Reading
    ABSTRACT Smallholder farmers of Apac District received advice from extension agents on the production of high quality cassava flour from 2009 to 2015. Despite training, production remained low at 4000kg ha-1 compared to the expected output of 8000kg ha-1 , which called for an investigation conceived to establish the effectiveness of the group... Continue Reading
    TABLE OF CONTENTS APPROVAL DECLARATION . ii DEDICATION ACKNOWLEDGEMENT iv ABSTRACT viii CHAPTER ONE INTRODUCTION 1 1 .0 Introduction 1 1 Background of the study 1 .2 Statement of the Problem 2 1.3 Purpose of the study 3 1.4 Objective of the study 3 1.5 Research Questions 3 1 .6 Scope of the study 3 1.6.1 Subject scope 3 1 .6.2 Geographical scope 3... Continue Reading
    USE OF RAW MATERIALS INSPECTION AND ITS IMPACTS ON QUALITY OF PRODUCTION CHAPTER I: Introduction 1.1            Background of the Study The ideal situation for inspection is of course one in which no inspection is necessary. This is because the quality assurance effort cooperatively mounted by the purchaser and supplier has resulted in... Continue Reading
    ABSTRACT The question on whether aspirin has any important role to play or not has generated a lot of controversies over years especially among the individuals that fakes the drug, and the pharmaceutical industries that produces it.  This question that seemed to be half way answered gave rise to carrying out of this study. This work is in such a... Continue Reading
    CHAPTER 1 1.0INTRODUCTION 1.1BACKGROUND OF STUDY Cookies are a form of confectionery products usually dried to a low moisture content (Okaka, 2009). Compared to biscuits, they tend to be larger with a softer chewer texture. They are consumed extensively all over the world as a snack food and on a large scale in developing countries where protein... Continue Reading
    CHAPTER 1 1.0 INTRODUCTION 1.1 BACKGROUND OF STUDY Cookies are a form of confectionery products usually dried to a low moisture content (Okaka, 2009). Compared to biscuits, they tend to be larger with a softer chewer texture. They are consumed extensively all over the world as a snack food and on a large scale in developing countries where protein... Continue Reading
    Call Us Get this work