CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT

  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0118
  • Access Fee: ₦5,000 ($14)
  • Pages: 28 Pages
  • Format: Microsoft Word
  • Views: 869
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT
This project is concern about the construction of an electrical stove with three oven apartment is described in his project.  It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternative means to replace the use of  kerosene and gas for cooking and drying which are often not available due to scarcity of these products, however, the project students have employed the use of electricity which is rending available.
The analysis of each stage of development of this equipment is clearly described.  Having compared the results of this construction with those existing or parallel ones, it was found out that it stands the test of time.
However, the operation of this electrical equipment in not without limitation.  For precisely nine years now Nigeria has been facing power instability, and a seizure of electrical power does disrupt the operation of this equipment, for without which no source of its energy.
The cost analysis also prove to a large extent to be relatively cheaper than most modern cookers and ovens for domestic application.


TABLE OF CONTENT
Title page
Table of content
Certification
Dedication
Acknowledgement
Abstract
Approval

CHAPTER ONE
1.0 Introduction/literature Review
1.1 Introduction
1.2 Problem statement
1.3 Purpose of objective of this study
1.4 Literature review

CHAPTER TWO 
2.0 Constructional specification of the oven
2.1 Determination of the insulted portion
2.2 Materials used and their importance
2.3 Mill steel
2.4 Copper element
2.5 Insulting materials
2.6 Silicon

CHAPTER THREE
3.1 Mechanical construction
3.2 The main frame
3.3 The top and sides covers
3.4 Back cover
3.5 The top/heating chamber
3.6 Stand/handle
3.7 The framing of the door
3.8 Mode of operation

CHAPTER FOUR
4.0 Conclusion
4.1 How to operate
4.2 Inspection and testing
4.3 The visual inspection
4.4 Cold test
4.5 Insulation Resistance test
4.6 The hot test
4.7 Problems encountered
4.8 Recommendations
4.9 Cost analysis
4.10 References
CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0118
  • Access Fee: ₦5,000 ($14)
  • Pages: 28 Pages
  • Format: Microsoft Word
  • Views: 869

500
Leave a comment...

    Related Works

    ABSTRACT This project is concern about the construction of an electrical stove with three oven apartment is described in his project. It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternative means to replace the use of keroseneand gas for cooking and drying which are often... Continue Reading
    ABSTRACT            This project is concern about the construction of an electrical stove with three oven apartment is described in his project.  It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternat6ive means to replace the use of  kerosine and gas for cooking... Continue Reading
    ABSTRACT This project is concern about the construction of an electrical stove with three oven apartment is described in his project.  It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternative means to replace the use of  kerosene and gas for cooking and drying which are... Continue Reading
    ABSTRACT This project is concern about the construction of an electrical stove with three oven apartment is described in his project. It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternat6ive means to replace the... Continue Reading
    ABSTRACT In this project (3) alternative design solutions were considered for the locally made electric run. The authors utilize the available local raw demerits of each alternative with respect to the considered group were discussed and the solutions of the alternative that best satisfied the limitations was selected for production. Material... Continue Reading
    ABSTRACT In this project (3) alternative design solutions were considered for the locally made electric run. The authors utilize the available local raw demerits of each alternative with respect to the considered group were discussed and the solutions of the alternative that best satisfied the limitations was selected for production. Material... Continue Reading
    ABSTRACT In this project (3) alternative design solutions were considered for the locally made electric run. The authors utilize the available local raw demerits of each alternative with respect to the considered group were discussed and the solutions of the alternative that best satisfied the limitations was selected for production. Material... Continue Reading
    CONSTRUCTION OF A STANDARD BANKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELECTRIC/GAS) ABSTRACT This project is designed to make the students utilize as many theoretical and practical concept as have been instructed in alstron to mechanical engineering workshop technology. Students are expected to learn and apply concepts, principles about... Continue Reading
    Abstract The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties... Continue Reading
    ABSTRACT The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts. The technological properties... Continue Reading
    Call Us Get this work