DESIGN AND CONSTRUCTION OF A D.C TO A.C INVERTER SYSTEM

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0150
  • Access Fee: ₦5,000 ($14)
  • Pages: 26 Pages
  • Format: Microsoft Word
  • Views: 922
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT
This project is titled the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices and in homes in the absence of power supply from the national supply authority, NEPA. In order words the device / item serves as a substitute for NEPA which almost monopolises the power supply to people.
It is designed in such a way that it will take up 12v DC from battery and inverts it to an output of 220v, 50H2 AC. It makes no noise during operation and no hazardous carbon monoxide is generated in the surrounding.   
This is a feature that makes it safe to use any were when compared to generator. Also, the circuit is capable of charging the battery (i.e 12v source) when the power from the supply authority is on. This greatly reduces the cost of operation of the system. 
 
TABLE OF CONTENT 
Title Page 
Approval Page 
Dedication 
Acknowledgement 
Abstract 

Table of Content 
CHAPTER ONE 
1.0Introduction 
1.1Block Diagram of the Inverter System
1.2Inverter System
1.3Circuit Diagram of the System 

CHAPTER TWO
2.0Major Component’s Description
2.1Resistors 
2.2Diodes 
2.3Capacitors
2.4Transformers
2.5Transistor
2.6Integrated Circuit 

CHAPTER THREE
3.0Sectional Description of the System  
3.1Oscillator Section 
3.2Switching Section 
3.3Power Transformer and Inverter Actions 

CHAPTER FOUR 
4.0Construction Procedure and Testing 
4.1Casing and Packaging 
4.2Assembling of Sections 
4.3Testing of System Operation
 
CHAPTER FIVE     
5.0Installation of the Completed System 
5.1Problem Encountered 
5.2Cost Analysis 

CHAPTER SIX 
6.0Conclusion 
6.1Recommendation 
6.2Bibliography 

DESIGN AND CONSTRUCTION OF A D.C TO A.C INVERTER SYSTEM
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0150
  • Access Fee: ₦5,000 ($14)
  • Pages: 26 Pages
  • Format: Microsoft Word
  • Views: 922

500
Leave a comment...

    Related Works

    ABSTRACT This project is titled the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices and in homes in the absence of power supply from the national supply authority, NEPA. In order words the device / item serves as a substitute for NEPA which almost monopolises the power supply to... Continue Reading
    ABSTRACT This project is titled the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices and in homes in the absence of power supply from the national supply authority, NEPA. In order words the device / item serves as a substitute for NEPA which almost monopolises the power supply to... Continue Reading
    ABSTRACT This project is titled the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices and in homes in the absence of power supply from the national supply authority, NEPA. In order words the device / item serves as a substitute for NEPA which almost monopolises the power supply to... Continue Reading
    ABSTRACT As the name of the project implies “Power Inverter”, is an electronics system that converts DC Energy (voltage) to an AC energy. The major aim of this project is to design and construct a 1000VA Power inverter that is capable of powering loads of equivalent ratings, in the absence of power supply from NEPA or Generator. The system... Continue Reading
    ABSTRACT As the name of the project implies “Power Inverter”, is an electronics system that converts DC Energy (voltage) to an AC energy.  The major aim of this project is to design and construct a 1000VA Power inverter that is capable of powering loads of equivalent ratings, in the absence of power supply from NEPA or Generator. The system... Continue Reading
    ABSTRACT This project is he design and construction of a voltage inverter system with trickle charging system. This device is design to provide power supply for the need of offices, household etc. In absence of NEPA power supply. It would also prevent harm to our appliances caused by power holding company LTD (NEPA) Random power outage . TABLE OF... Continue Reading
    ABSTRACT This project is he design and construction of a voltage inverter system with trickle charging system. This device is design to provide power supply for the need of offices, household etc. In absence of NEPA power supply. It would also prevent harm to our appliances caused by power holding company LTD (NEPA) Random power outage . TABLE OF... Continue Reading
    ABSTRACT This project is he design and construction of a voltage inverter system with trickle charging system. This device is design to provide power supply for the need of offices, household etc. In absence of NEPA power supply. It would also prevent harm to our appliances caused by power holding company LTD (NEPA) Random power outage . TABLE OF... Continue Reading
    ABSTRACT 500VA power inverter system is a DC to AC conversion system of 500VA power rating and expected to carry around 400 watts load. It provides power to electronic and electrical appliances such as radio sets, TV DVD/VCD, computers, fans and lighting. The design was conceived and put down as block diagram. Corresponding circuit diagrams for... Continue Reading
    ABSTRACT An inverter is an electronic device that converts direct current (DC¬) to alternating current (AC) the converted Ac can be at any required voltage and frequency with the use of appropriate transformers, switching and control circuit. It’s simple put, is an electronic box that makes household... Continue Reading
    Call Us Get this work