THE DESIGN AND FABRICATION OF AN ELECTRIC POPCORN FRYING MACHINE

  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0156
  • Access Fee: ₦5,000 ($14)
  • Pages: 32 Pages
  • Format: Microsoft Word
  • Views: 993
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
PREFACE

The electrical popcorn machine is a device for preparing especial popcorn for the human consumption. The device in produced to help the masses to be self valiance in this are of down trodden economy.
This project work is divided into five chapters, chapter one; the introduction discusses the relevance of the project work, problems it is meant to address its importance, scope and limitation and definition of terms. 
Chapter two comprises the deign and construction, component and fabrication. The various types of heating elements and electric motors and then operation are discussed. 
Chapter three brings to the assembly, principles of operation and control of the motor. 
Chapter four highlights about the various safety rules project cost evaluation and investment opportunity. 
Chapter five discussed on insertion and testing recommendation and conclusion together with references and bibliography.

TABLE OF CONTENTS 
Title Page
Letter of Transmittal
Approval Page
Dedication
Acknowledgement
Table of Contents
Preface

CHAPTER ONE 
1.1 Introduction
1.2 Design Construction, and Fabrication, Problem
1.3 Objectives of the design (benefits of automatic against manual)
1.4 Scope and limitation
1.5 Importance of the project
1.6 Definition of terms

CHAPTER TWO 
2.1 Electric motors
2.2 Heating element (specification and design)
2.3 Heat Transfer
2.4 Stress Analysis

CHAPTER THREE
3.1 Electrical Connection
3.2 Principles of operation
3.3 Usage and Maintenance of Machine

CHAPTER FOUR
4.1 Safety Precaution
4.2 Project Cost Evaluation.

CHAPTER FIVE
5.1 Inspection and Testing
5.2 Recommendation and Conclusion
Reference
Bibliography

THE DESIGN AND FABRICATION OF AN ELECTRIC POPCORN FRYING MACHINE
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Mechanical Engineering
  • Project ID: MCE0156
  • Access Fee: ₦5,000 ($14)
  • Pages: 32 Pages
  • Format: Microsoft Word
  • Views: 993

500
Leave a comment...

    Related Works

    CHAPTER ONE 1.1 INTRODUCTION Nigeria’s economy has suffered a terrible setback over the year the common man finds it difficult to make for his livelihood, some people take pop-corn as one of their favorite food especially bachelors spinsters who can take pop-corn as super, breakfast and even lunch.  The University and Polytechnics graduate no... Continue Reading
    CHAPTER ONE 1.0 INTRODUCTION 1.1 BACKGROUND Cassava which is known biologically as “manihotesculentacrantz” is a crop which has many varieties. Cassava, is a perennial woody shrub in the Euphorbiaceous (Spurge family) native to South America, but now grown in tropical and sub-tropical areas... Continue Reading
    ABSTRACT In this project (3) alternative design solutions were considered for the locally made electric run. The authors utilize the available local raw demerits of each alternative with respect to the considered group were discussed and the solutions of the alternative that best satisfied the limitations was selected for production. Material... Continue Reading
    ABSTRACT In this project (3) alternative design solutions were considered for the locally made electric run. The authors utilize the available local raw demerits of each alternative with respect to the considered group were discussed and the solutions of the alternative that best satisfied the limitations was selected for production. Material... Continue Reading
    ABSTRACT In this project (3) alternative design solutions were considered for the locally made electric run. The authors utilize the available local raw demerits of each alternative with respect to the considered group were discussed and the solutions of the alternative that best satisfied the limitations was selected for production. Material... Continue Reading
    Abstract More than 2.2 million Ghanaian families in rural areas depend on firewood and charcoal as fuel for cooking [1]. This high dependency is taking a toll on forest resources due to rampant deforestation. “Ghana's forest cover, which stood at 8.2 million hectares in 1900, has now been reduced to about 1.2 million hectares, with an estimated... Continue Reading
    Abstract This report presents the optimisation of a ceramic-matrix composite (anthill sand and cement), reinforced with treated coir fibres for applications in the construction of a low costsolar powered cooking stove to solve the current trends in the depletion of forest spaces in Ghana due to excessive destruction as a result of using firewood... Continue Reading
    ABSTRACT This write up outlines the design and fabrication of  wood lathe machine. This type of lathe is capable of creating different wood designs using the cheapest available material and method. To achieve functional and efficient wood lathe of  this kind, we analyzed as well as synthesized the different possible design solutions and... Continue Reading
    ABSTRACT This Machine is design and fabricate as a prerequisite for the award of a Higher National Diploma. We sketch different designs which after consideration of many factors like the machine efficiency, the cost of materials e.t.c before we finally embark on this machine. The machine major component are the shaft, the inner barrel, the outer... Continue Reading
    ABSTRACT The aim of this paper is to get a best performance by an ice block/cube making machine of refrigeration with suitable time. In present day hotels, resort and bar require more ice in very less time. So, to solve this problem and control the required time to ice formation, we construct an ice cube making machine. In present days, in market... Continue Reading
    Call Us Get this work