DESIGN AND CONSTRUCTION OF A SOLAR POWERED MULTIPLE CELL PHONES CHARGING BOOTH

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0169
  • Access Fee: ₦5,000 ($14)
  • Chapters: 6 Chapters
  • Pages: 51 Pages
  • Methodology: Nil
  • Reference: YES
  • Format: Microsoft Word
  • Views: 1.3K
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

ABSTRACT

Cell phones need electric sources to charge their batteries in order to work, but there are people in developing and third world countries that find it hard to access electric sources.In an attempt to provide an alternative means of charging to those unfortunate areas in third world and developing countries, a solar powered cell phone charging booth is to be designed and constructed in this project.

The goal of this project is to create a multiple output solar cell phone chargers for Local areas that found it difficult to charge their phones. The charger takes an input of 12 volts from solar panel and reduces the voltage level to 5 volts output used to charge cell phones.

The design, construction and testing of the solar charger has been achieved and found to work satisfactorily. A cell phone charged at a rate similar to a conventional phone charger and the operation offers a reliable protection for cell phone batteries under charging.

CHAPTER1: INTRODUCTION

1.1 Introduction- - - - - - - - - - 1

1.2 Aim and Objectives- - - - - - - - - 3

1.3 Scope of the Project- - - - - - - - - 3

1.4 Problem Statement- - - - - - - - - 4

1.5 Justification of the Project- - - - - - - - 4

1.6 Thesis Outline-- - - - - - - - - 5


CHAPTER 2: LITERATURE REVIEW 

2.1 Introduction- - - - - - - - - - 7

2.2 Hardware Components- - - - - - - - 82.

2.1 Solar Panel- - - - - - - - - - 82

.2.2 Solar Charger- - - - - - - - - 92.

2.3 USB Port- - - - - - - - - - 102.

2.4 Cell Phone Battery-- - - - - - - - 12

2.3 Components Description- - - - - - - - 13


CHAPTER 3: MATERIALS AND METHODS

3.1Design Requirements-- - - - - - - 19

3.2 Circuit Diagram for the Solar Charger- - - - - - 20

3.3Circuit Analysis- - - - - - - - - 21

3.4List of Components- - - - - - - - - 26


CHAPTER FOURDESIGN ANALYSIS AND CONSTRUCTION


CHAPTER FIVEPROJECT CONSTRUCTION PROCESS AND TESTING

LIST OF FIGURES

Figure                                                                                                     PageFigure 

2.1: USB Connectors- - - - - - - - 

Figure 2.2: Resistors Configurations for USB Pins- - - - -14

Figure 2.3: TL431 Pin Configuration- - - - - - -15Figure 2.4: 7805 Pin out- - - - - - - - 16Figure 2.5:  Voltage Regulator Block Diagram- - - - - 17Figure 2.6: Pin out of LM358- - - - - - - - 18Figure 3.1: The Proposed Circuit Design for Solar Charger- - - 20Figure 3.4: LM358 Connection- - - - - - - 24Figure 4.1: Image of the Circuit on Project Board without battery- - 28Figure 4.2: Image of Circuit on Project Board with Battery- - - 28Figure 4.3: Image of Solar Charger Circuit-- - - - - 29Figure 4.4: Image of Multi-meter used- - - - - 29

Figure 4.5: Solar Charger Circuit Output- - - - - - 30Figure 4.6: Complete Circuit of the Solar Charger- - - - 30Figure 4.7: Image of Soldering iron used- - - - - - 31Figure 4.8: Solar Panel construction casing- - - - - 32Figure 4.9: Front and Back views of the Circuit Construction Casing - 33Figure 4.10: Snap shot of the complete Device with Cell phones connected-- - - - - - - - - - - 33

DESIGN AND CONSTRUCTION OF A SOLAR POWERED MULTIPLE CELL PHONES CHARGING BOOTH
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0169
  • Access Fee: ₦5,000 ($14)
  • Chapters: 6 Chapters
  • Pages: 51 Pages
  • Methodology: Nil
  • Reference: YES
  • Format: Microsoft Word
  • Views: 1.3K

500
Leave a comment...

    Related Works

    ABSTRACT Automatic gate is one of most usefully thing to use in companies, colonies, collages, homes, and schools. There is some type to operate a gate such as a sliding on screw or on rack and pinion, piston operated, rotary. Design is available for some type of operation and it is most costly also When installation and maintenance cost is not... Continue Reading
    Abstract In this project we designed a solar powered computer control system  for electrical machines and spark ignition engines. It is made up of a  hardware device that comprises of various electrical components  which are powered by a 25W solar panel. The power cord of the  machines are modified and connected to the hardware and the ... Continue Reading
    Abstract In this project we designed a solar powered computer control system  for electrical machines and spark ignition engines. It is made up of a  hardware device that comprises of various electrical components  which are powered by a 25W solar panel. The power cord of the  machines are modified and connected to the hardware and the ... Continue Reading
    ABSTRACT Researchers suggest that the amount of sunlight that strikes the Earth's surface in an hour and a half is enough to handle the entire world's energy consumption for a full year. Solar power system is one of the best renewable energy technologies which is not only cost effective but environment friendly as well.This study aimed at... Continue Reading
    Abstract As the world keeps evolving, the demand for electricity increases. The growing energy consumption leads to higher cost that many people, especially in Ghanaian rural areas, cannot afford. Thus, considering this, this paper focuses on designing a Stirling engine to pump water in homes. In order to contribute to the use of renewable energy... Continue Reading
    Abstract More than 2.2 million Ghanaian families in rural areas depend on firewood and charcoal as fuel for cooking [1]. This high dependency is taking a toll on forest resources due to rampant deforestation. “Ghana's forest cover, which stood at 8.2 million hectares in 1900, has now been reduced to about 1.2 million hectares, with an estimated... Continue Reading
    Abstract This report presents the optimisation of a ceramic-matrix composite (anthill sand and cement), reinforced with treated coir fibres for applications in the construction of a low costsolar powered cooking stove to solve the current trends in the depletion of forest spaces in Ghana due to excessive destruction as a result of using firewood... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1Background Information Electricity is a general term comprising of a variety of phenomena resulting from the presence and flow of electric charge. These include many phenomena, such as lightning, static... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1 Background Information Electricity is a general term comprising of a variety of phenomena resulting from the presence and flow of electric charge. These include many phenomena, such as lightning,... Continue Reading
    ABSTRACT Generally the cutting and plate are made in plastics. The plastics are harmful and it has many disadvantages to us. By naturally we get leaves, Leaves by using this we can make cups. It is very cheap and it does not have any chemical effects. The Leaf cup is made by a solar tea leaf cutting machine. The machine is operated by the solar... Continue Reading
    Call Us Get this work