DESIGN AND CONSTRUCTION OF 1000VA POWER INVERTER SYSTEM

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0193
  • Access Fee: ₦5,000 ($14)
  • Pages: 40 Pages
  • Format: Microsoft Word
  • Views: 871
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT
As the name of the project implies “Power Inverter”, is an electronics system that converts DC Energy (voltage) to an AC energy.  The major aim of this project is to design and construct a 1000VA Power inverter that is capable of powering loads of equivalent ratings, in the absence of power supply from NEPA or Generator.
The system (power inverter) consists of the AC mains sensor section, Relay/change over section, Battery charger section, oscillator section, Driver section, output amplifier section, inverter output transformer section and the power supply unit.  The power supply unit supplies the voltage that powers the circuit.  The AC sensor senses the presence of AC when there is NEPA and the relay connects it to the loads.  The battery charger charges the 12V battery when the NEPA as ON.
When NEPA fails, the relay switches the inverter to battery operating mode.  In this case, the oscillator is switched on the oscillator is the heart of the inverter system.  It generates oscillating pulses which result, to the conversion of the DC voltage from battery to AC voltage.  In this project, we used an IC SG3524N in the oscillator circuit.  The SG3524N is a 16 pins IC and its output is taken from pin 11 and pin 14.  It happens that when pin 11 is ON, pin 14 is off and vice-versa.  The output of the oscillator is connected to the output amplifier, which amplifies it to an appreciable level and this is connected to the two Driver channels.
The Driver section consists of MOSFET Transistors of ratings APT8030L.  The driver is of two channels A and B and each channel contains three MOSFETS.  The Driver section determines the power rating of the inverter.  Due to the nature of oscillator output, it happens that when driver channel A is switched ON, channel B will be off and vice-versa.  This result to an AC output of frequency 50HZ.  The output Transformer steps it up to 240V.  This is the principle of power inverter.
Inverter system is very essential.  It does not need fuel or manual operation, since it is automatic.  Hence it saves both time and energy and improves economy.  The inverter finds applications both in the industry and at home for powering sensitive loads or system like computer resource centres which need no power interruption.

TABLE OF CONTENTS
Title Page i
Approval Page ii
Dedication iii
Acknowledgement iv
Abstract v
Table of Contents vi

CHAPTER ONE
1.0 Introduction 1
1.1 Aim 2
1.2 Limitation 3
1.3 Specification 4

CHAPTER TWO
2.0 Literature Review 5
2.1 Review 5
2.2 Resistor 5

CHAPTER THREE
3.0 System Operation 21
3.1 Block Diagram 21
3.2 Circuit Diagrams   24

CHAPTER FOUR
4.0 System Construction and System Packaging 26
4.1 Prototyping 26
4.2 Component Mounting 26
4.3 Soldering 27
4.4 Packaging 28
4.5 Packaging or Casing 28

CHAPTER FIVE
5.0 System Testing and Result 29
5.1 Continuity Testing 29
5.2 Voltage Testing 29
5.3 Result 30

CHAPTER SIX
6.0 Conclusion & Recommendation 31
6.1 Conclusion 31
6.2 Recommendation 31
References 35
DESIGN AND CONSTRUCTION OF 1000VA POWER INVERTER SYSTEM
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0193
  • Access Fee: ₦5,000 ($14)
  • Pages: 40 Pages
  • Format: Microsoft Word
  • Views: 871

500
Leave a comment...

    Related Works

    ABSTRACT 500VA power inverter system is a DC to AC conversion system of 500VA power rating and expected to carry around 400 watts load. It provides power to electronic and electrical appliances such as radio sets, TV DVD/VCD, computers, fans and lighting. The design was conceived and put down as block diagram. Corresponding circuit diagrams for... Continue Reading
    ABSTRACT Power inverter is an electrical appliance that can be used with DC battery as an alternativesource of energy supply in the event of power failures and energy crisis. It is cheap, clean,very conducive and silent when in operation and a very reliable source of power supply as togenerator. Modern research and technologies have shown that... Continue Reading
    ABSTRACT Power inverter is an electrical appliance that can be used with DC battery as an alternativesource of energy supply in the event of power failures and energy crisis. It is cheap, clean,very conducive and silent when in operation and a very reliable source of power supply as togenerator. Modern research and technologies have shown that... Continue Reading
    ABSTRACT This project review the conformability of uninterrupted power supply through the use of power inverter, However, inverter is of different categories base on power rating such as 1KVA, 1.5KVA, 5KVA etc. Moreover, since the invention of inverter, some problem associated with alternative power supply had been drastically reduced. Meanwhile,... Continue Reading
    ABSTRACT No one form of power can sustain a nation. The ever increasing demand for electrical power has arisen from our lifestyles with revolves around electric power to speed up processes of development such as manufacturing, service provision and general well being of man. The need for the provision of quick but minute energy to prevent the... Continue Reading
    ABSTRACT No one form of power can sustain a nation. The ever increasing demand for electrical power has arisen from our lifestyles with revolves around electric power to speed up processes of development such as manufacturing, service provision and general well being of man. The need for the provision of quick but minute energy to prevent the... Continue Reading
    ABSTRACT This project is titled the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices and in homes in the absence of power supply from the national supply authority, NEPA. In order words the device / item serves as a substitute for NEPA which almost monopolises the power supply to... Continue Reading
    ABSTRACT This project is titled the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices and in homes in the absence of power supply from the national supply authority, NEPA. In order words the device / item serves as a substitute for NEPA which almost monopolises the power supply to... Continue Reading
    ABSTRACT This project is titled the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices and in homes in the absence of power supply from the national supply authority, NEPA. In order words the device / item serves as a substitute for NEPA which almost monopolises the power supply to... Continue Reading
    DESIGN AND CONSTRUCTION OF 1000VA AUTOMATIC VOLTAGE REGULATION ABSTRACT The design and construction of 1000VA Automatic Voltage Regulator is made to power our Electrical and Electronic devices, supplying them with the normal output voltage which ranges from 100V- 240v irrespective of the constant voltage and current fluctuation, failure and... Continue Reading
    Call Us Get this work