CONSTRUCTION OF A MICROCONTROLLER BASED SECURITY DOOR USING SMART CARD

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0197
  • Access Fee: ₦5,000 ($14)
  • Pages: 80 Pages
  • Format: Microsoft Word
  • Views: 1.1K
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT
This project shows the construction of a microcontroller based security door using smart card. It is aimed towards programming the microcontroller to control the hardware in sliding door. The system consists of a microcontroller 89S52 which sends a signal to the multiplexers on insertion of the smart card in the card slot. The multiplexers consist of ICS which prompts for a display of the identity of the card user in the liquid crystal display (LCD). The LCD displays the status of the card. On validation of the card, the LCD displays a welcome note to the user and prompts for a pin code. The pin code is being keyed in from the key pad. If confirmed by the program written into the microcontroller access will be granted, otherwise no access, giving the user two more chances to insert the correct smartcard or pin code to it, before final denial of access and alarm. When access is granted, the card sends a 5volt signal to the microcontroller which triggers relay, resulting in the opening of the door.

TABLE OF CONTENTS
Title Page - - - - - - - i
Approval Page - - - - - - ii
Dedication - - - - - - iii
Acknowledgement - - - - - iv
Abstract - - - - - - - v
Table of contents - - - - - vi
List of Tables- - - - - - - xi
List of Figures - - - - - - xii
Glossary of Symbols / Abbreviations - - xiii

CHAPTER ONE
1.0 Introduction - - - - - - 1
1.1 Areas of application - - - - 4
1.2 Aims and Objectives - - - 5
1.3 Project Scope - - - - - 5

CHAPTER TWO
2.0 Literature review - - - - - 6
2.1 Mechanism of Security of access system - - 7
2.1.2 Types of security access system - - - 8
2.1.3 Sound activated lock system - - 8
2.1.4 Shadow detector access system - - - 8
2.1.5 Pressure and pad sensitive security system - 9
2.1.6 Smartcard access system - - - 9
2.1.7 History - - - - - - 10
2.2 The components used - - - 12
2.2.1 The microcontroller - - - - 12
2.2.2 Elements of a microcontroller - - - 12
2.2.2.1 The CPU - - - - - - 13
2.2.2.2 Ram - - - - - - - 13
2.2.2.3 Eprom - - - - - - 14
2.2.2.4 Input / Output - - - - - 14
2.2.3 Relay - - - - - - - 14
2.2.4 Liquid crystal display - - - 16
2.2.5 Key pad - - - - - - 16
2.2.6 Active components - - - - - 17
2.2.6.1 Transistor - - - - - - - 17
2.2.6.2 Diodes - - - - - - 18
2.3.0 Passive component - - - - - 19
2.3.1 Resistor - - - - - - 19
2.3.2 Capacitor - - - - - - 22
2.3.3 Transformer - - - - - - 23
2.4 Micro switches - - -- - - 24

CHAPTER THREE
3.0 Design analysis of the electric circuit and
Mechanical unit - - - - - 25
3.1 Hardware design - - - - - 25
3.2 Keypad select module - - - - 27
3.3 Sliding door unit - - - - - 28
3.4 Alarm signal unit - - - - - 31
3.5 Display unit - - - - - - 32
3.5.1 Display unit calculation - - - - 33
3.6 89S52 microcontroller - - - - 34
3.6.1 Powering the microcontroller - - - 37
3.6.2 Crystal oscillator unit - - - - 39
3.7 smartcard unit - - - - - 39
3.8 Power supply unit - - - - - 40
3.8.1 Step down - - - - - - 41
3.8.2 Rectification - - - - - 41
Filtering - - - - - - 43
3.9 synchronous 12v DC motor - - - 44
3.10 mechanical unit - - - - - 45
3.10.1 Fabrication of component parts - - - 45
3.10.2 Mechanism casing - - - - - 46
3.10.3 Door post - - - - - - 46
3.10.4 The door - - - - - - 46
3.11 software development - - - - 47
3.11.1 text editor - - - - - - 47
3.11.2 Translator - - - - - 47
3.11.3 Link / locator - - - - - 48
3.11.4 Loader - - - - - - 48
3.11.5 Testing - - - - - - 48
3.11.6 Debugging - - - - - - 48
3.12 Development process - - - - 49
3.13 Program entry and editing - - 49
3.14 Assembly and linking - - - - 49
3.15 Hexadecimal conversion - - - - 50
3.16 Circuit design diagram - - - - 51

CHAPTER FOUR
4.0 Material selection, assembly process,
Cost analysis, test and result. - - - 52
4.1 Material selection - - - 52
4.2 Assembly process - - - 53
4.3 Cost analysis - - - - - 53
4.4 Test and Result - - - - 55

CHAPTER FIVE
5.0 Discussion of results, Conclusion and Recommendation
5.1 Discussion of results - - - 56
5.2 Conclusion - - - - - 56
5.3 Recommendation - - - - 57
References

CONSTRUCTION OF A MICROCONTROLLER BASED SECURITY DOOR USING SMART CARD
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0197
  • Access Fee: ₦5,000 ($14)
  • Pages: 80 Pages
  • Format: Microsoft Word
  • Views: 1.1K

500
Leave a comment...

    Related Works

    ABSTRACT This project shows the construction of a microcontroller based security door using Smart card. It is aimed towards programming the microcontroller to control the Hardware in sliding door. The system consists of a microcontroller 89S52 which Sends a signal to the multiplexers on insertion of the smart card in the card slot. The... Continue Reading
    ABSTRACT This project shows the construction of a microcontroller based security door using Smart card. It is aimed towards programming the microcontroller to control the Hardware in sliding door. The system consists of a microcontroller 89S52 which Sends a signal to the multiplexers on insertion of the smart card in the card slot. The... Continue Reading
    Abstract               During the invention of security system alarms, in the early 80s technology of system shadow which involves lighten and sensing of objects was at that age found during their experiments using a special material know as light dependent resistor which its family lies in the resistance serials. The development of... Continue Reading
    ABSTRACT In the up to date electronic planet, authentication of an individual is a vital assignment in numerous territories of everyday existence. Smart Cards are secure compact space gadgets utilized for a few requisitions specifically security identified ones including access to framework's database either connected or disconnected from the... Continue Reading
    ABSTRACT In the up to date electronic planet, authentication of an individual is a vital assignment in numerous territories of everyday existence. Smart Cards are secure compact space gadgets utilized for a few requisitions specifically security identified ones including access to framework\'s database either connected or disconnected from the... Continue Reading
    ABSTRACT In the up to date electronic planet, authentication of an individual is a vital assignment in numerous territories of everyday existence. Smart Cards are secure compact space gadgets utilized for a few requisitions specifically security identified ones including access to framework's database either connected or disconnected from the... Continue Reading
    ABSTRACT  Security is one thing human should not joke with, especially in today’s world where crime is at a higher rate. One of the ways of providing security is the introduction of security doors in houses, companies, offices and warehouses. Security doors may prevent or control entry or exit, or they may be merely decorative. Larger doors can... Continue Reading
    ABSTRACT The security of our homes and properties are of utmost importance as various individuals and engineers have worked on ways to improve the security of our homes. This project which is 'Development of a door lock security system based on speech recognition' is aimed at introducing maximum security and assurance to individuals and their... Continue Reading
    TABLE OF CONTENT DECLARATION.................................................................................................................................. i APPROVAL........................................................................................................................................ ii DEDICATION... Continue Reading
    ABSTRACT Microcontroller based automate controller is a project design of a system that is used in operating a gate automatically. The system opens the gate automatically when a human being or car is about to enter a compound or exit a compound. The system works by sensing the light rays from the head lamp of the vehicle. The light ray is sensed... Continue Reading
    Call Us Get this work