Construction of 12V 10A Solar Charge Controller for Solar Energy Utilization

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0208
  • Access Fee: ₦5,000 ($14)
  • Pages: 38 Pages
  • Format: Microsoft Word
  • Views: 1.1K
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853


Abstract

This project work centered on construction of 12V/10A solar charge controller that is needed in photovoltaic system to safely charge regulate and discharge of sealed lead acid battery through DC load. Solar charge controller is devices that regulate solar photovoltaic power and prevent overcharging, over discharging or overflow of current that reduces the lifespan, durability and performance of the battery. The12v/10A solar charge controller was constructed using variable resistor, resistor, transistor, relay and light dependent resistor which were connected and soldered at science laboratory technology department, federal polytechnic Offa Nigeria. Experimentation was carried out using solar photovoltaic panel, ammeter, voltmeter, stopwatch, 12V DC battery and MPPT (constructed solar charge controller). The result show that the power obtained is at every 10minutes intervals. However the power obtained and observed shows that the MPPT solar charge controller has higher charging, regulating and discharging of battery under the influence of atmospheric temperature of Offa location.


Construction of 12V 10A Solar Charge Controller for Solar Energy Utilization
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0208
  • Access Fee: ₦5,000 ($14)
  • Pages: 38 Pages
  • Format: Microsoft Word
  • Views: 1.1K

500
Leave a comment...

    Related Works

    CHAPTER ONE INTRODUCTION 1.1Background Information Electricity is a general term comprising of a variety of phenomena resulting from the presence and flow of electric charge. These include many phenomena, such as lightning, static... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1 Background Information Electricity is a general term comprising of a variety of phenomena resulting from the presence and flow of electric charge. These include many phenomena, such as lightning,... Continue Reading
    ABSTRACT This project is aimed at producing a solar charger controller which help to improve the steady power supply in department of science laboratory technology IMT Enugu the smart charge controller is designed, so that the battery does not get over charged thereby ensuring no reduction of durability of the battery. This kind of system requires... Continue Reading
    Table of Contents 1. Introduction 2. Electricity Demand 3. Wind Power System 4. Floating Solar Photovoltaic (PV) System 5. Electricity Storage Systems ____ 6. Site Choice 7. Planning Permission Statement 8. Environmental Impact Assessment _ 9. Project Plan 10.... Continue Reading
    The aim of the project is to design a renewable energy system that can meet the current and  projected electricity demands for the island of Great Cumbrae. This should be achieved by  providing a stable electricity output and the meet the calculated total annual base load supply of  11.29 GWh. In addition to providing a stable supply of... Continue Reading
    ABSTRACT This work is concerned with the features, analysis and design of a stand-alone solar energy based power supply with maximum power point tracking (MPPT) scheme. The features and operations of various types of solar cells and panels and the performance characteristics under varying temperature and irradiance conditions are studied.... Continue Reading
    ABSTRACT  Energy and exergy analysis of solar air heater with phase change material energy storage is considered in this research work. Energy and exergy models for component systems like flat plate solar collector and phase change material in one-dimensional heat conduction in a cylindrical pipe, for storing periods were obtained. Exergy... Continue Reading
    ABSTRACT This project presents a 40A maximum power point tracking solar charge controller. The MPPT charge controller tries to keep the voltage and the power stable. The MPPT charge controller will harvest more power from the solar array – it will adjust its input voltage to harvest the maximum power from the solar array and then transform this... Continue Reading
    ABSTRACT This project presents a 40A maximum power point tracking solar charge controller. The MPPT charge controller tries to keep the voltage and the power stable. The MPPT charge controller will harvest more power from the solar array – it will adjust its input voltage to harvest the maximum power from the solar array and then transform this... Continue Reading
    EXECUTIVE SUMMARY  The global energy market is looking for new sources of  non-conventional energy whereby existing methods of energy generation like Solar Photovoltaics have technologically surged. This advancement has led to higher adoption by  consumers in  residential and commercial sectors. Government policies have also been favourable in... Continue Reading
    Call Us Get this work