THE CONSTRUCTION OF AUTOMATIC VOLTAGE INVERTER AND A BATTERY CHARGER

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0251
  • Access Fee: ₦5,000 ($14)
  • Pages: 61 Pages
  • Format: Microsoft Word
  • Views: 1K
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT

 Automatic voltage inverter is an important area in power system engineering.  It is the process of using a 12v DC from the battery to achieve a 220/230V AC through the help of oscillator, drivers, power transistors and transformer.  The stages are battery to oscillators, oscillators to drivers, drivers to power transistors then from power transistors to transformer which is capable of giving out 220/230V (1000w) as an output.   A 1.25KVA (1000w) voltage inverter was constructed, tested and certified okay.  Since the inverter as constructed to step-up voltage, the power transformer is used as step-down for charging and as step up transformer for inverting.   This project helps in the improvement of the epileptic power supply we are having in Nigeria and it also reduce the high level of power dependence in Nigeria by serving as IPP’s (Independent Power Plants).  The project as run in school helps in equipping the students in the practical aspect of the course.


TABLE OF CONTENTS

Title page                                                                                                        i

Certification page                                                                                           ii

Dedication                                                                                                      iii

Acknowledgement                                                                                         iv

Abstract                                                                                                          v

Table of content                                                                     vi

CHAPTER ONE

Introduction                                                                           

Analysis (review of existing system)                                           

Aims and objective                                                                

Scope/Limit of the project                                                     

Application                                                                             

CHAPTER TWO

Literature review                                                                           

Introduction                                                                            

Brief review of used components                                        

Capacitor                                                                               

Resistor                                                                                  

Relay                                                                                      

Transistors                                                                             

Diodes                                                                                    

Switches                                                                                 

Operational amplifier                                                             

Transformer                                                                           

A.C. Voltage meter                                                                

Oscillator                                                                                

MOSEFET                                                                                       

CHAPTER THREE

Design and analysis                                                              

Introduction                                                                            

Methodology                                                                          

D.C. Supply (input voltage)                                                   

Voltage regulator                                                                   

Control logical circuit                                                             

Frequency generator                                                            

Phase splitter                                                                         

Driver                                                                                     

Step-up transformer                                                             

A.C. supply (output voltage)                                                 

Methodology II                                                                     

The unregulated supply (input voltage)                               

Isolating relay                                                                       

Step-up transformer/rectifier circuit                                     

Changing control/logic comparator circuit                          

Theory and calculation                                                         

Circuit diagram casing design                                              

CHAPTER FOUR

Constructions test and result                                                

Introduction                                                                          

Problem encountered                                                           

CHAPTER FIVE

Conclusion and recommendations                                        

 Conclusion                                                                            

Recommendations                                                                

References                                                                            

THE CONSTRUCTION OF AUTOMATIC VOLTAGE INVERTER AND A BATTERY CHARGER
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0251
  • Access Fee: ₦5,000 ($14)
  • Pages: 61 Pages
  • Format: Microsoft Word
  • Views: 1K

500
Leave a comment...

    Related Works

    ABSTRACT The practical importance of a battery charging unit in today’s world cannot be over emphasized. This is so since these batteries or accumulators are immensely needed by automobiles and in science laboratories. This thesis describes the methodical approach to the design and construction of any battery changer. However the procedure... Continue Reading
                                                             ABSTRACT This project describes the design and construction of an automatic Battery charger. Automatic Battery chargers are not particularly cheap, but the protection they afford in protecting batteries against overcharging and possible battery damage is highly... Continue Reading
                                                             ABSTRACT This project describes the design and construction of an automatic Battery charger. Automatic Battery chargers are not particularly cheap, but the protection they afford in protecting batteries against overcharging and possible battery damage is highly... Continue Reading
    ABSTRACT           A battery charger is an electrical device employed for charging batteries.  This batteries that are usually charged by battery changer are the storage battery charger are the storage batteries also known as “accumulator” the battery changer changes.  The alternating current form the power line into d.c suitable... Continue Reading
    ABSTRACT This project, 12v battery charge consist of few chapters, deal extensively with the design and construction of a batter charge which is capable of charging a 12v battery. The introductory chapter goes a long why in defining the battery charger and explanations of the mode of operations will be death with as we proceed. TABLE OF CONTENT... Continue Reading
    ABSTRACT   This project, 12v battery charge consist of few chapters, deal extensively with the design and construction of a batter charge which is capable of charging a 12v battery. The introductory chapter goes a long why in defining the battery charger and explanations of the mode of operations will be death with as we proceed.     TABLE OF... Continue Reading
    ABSTRACT This project presents the design and construction of a battery charger. A battery charger is an electrical/electronic device used to put energy into a secondary cell or rechargeable battery by forcing an electric current through it.  The system  consists of a step down transformer, an AC to DC converter and a DC voltage regulator. The... Continue Reading
    ABSTRACT  The battery which has always serve as a sources of electrical current has in the past been invalid and inmost cases seen as monument after implicating as battery wound have to be brought over and over again the implicating has been that of lot of money is been spent for this purpose we give appraise for the advancement of technology... Continue Reading
    ABSTRACT The battery which has always serve as a sources of electrical current has in the past been invalid and inmost cases seen as monument after implicating as battery wound have to be brought over and over again the implicating has been that of lot of money is been spent for this purpose we give appraise for the advancement of technology which... Continue Reading
    ABSTRACT This project which comprise of many chapters that deals extensively with designs and construction of battery charger with auto-cut off which is capable of charging a 12 volts battery. In this construction research, designs was carried out which historic research was used to break down and evaluate to a low level understating of what an... Continue Reading
    Call Us Get this work