ABSTRACT
The single wheel driven boom sprayer was developed, fabricated and evaluated for its performance at the department of Agricultural and Bio-environmental engineering workshop, Kwara state polytechnic, Ilorin. The spraying performance was carried out at spraying height of 0.5m, 0.6m and 0.7m respectively. The theoretical field capacity CT, the effective field capacity CE and Field efficiency (ŋ) at spraying height of 0.5m are 0.285ha/hr , 0.165ha/hr and 58%, while at spraying height 0.6m, are 0.273ha/hr, 0.158ha/hr and 57.81% and at spraying height 0.7m are 0.269ha/hr, 0.155ha/hr and 58.055% respective
TABLE OF CONTENTS
Title page i
Certification ii
Dedication iii
Acknowledgements iv Abstract v
Table of content vi-viii
List of Tables ix
List of Plates x
CHAPTER ONE
1 Introduction 1
1.2 Statement of the problem 2
1.3 Objective of the project 2
1.4 Justification of the project 3
CHAPTER TWO
2 Literature review 4 2.1 Spraying operation 4 2.1.1 Spray materials 5 2.1.2 Classification of sprayers 6 2.2 Types of sprayer 9 2.3 Sprayer differences 10 2.3.1 Types of hydraulic sprayers 10 2.3.2 Types of low volume sprayers 12 2.4 Calibration and operation 13 2.5 Spraying technique 14 2.6 Factors affecting spraying 15 2.7 Spraying machinery 16 2.8 Types of pumps for spraying 20
CHAPTER THREE
3.0 Materials and methods 24 3.1 Factors to be considered in the selection 24 of materials
3.2 Design Considerations 24 3.3 Design and development of various 26
Components
3.3.1 Knapsack sprayer 26
3.3.2 The frame 26 3.3.3 Driving wheel 27 3.3.4 Crank mechanism 28 3.3.5 The boom 29
3.4 Specification of the single wheel driven boom sprayer 30
3.5 Description of the single wheel driven boom sprayer 31
CHAPTER FOUR
4.0 Performance Evaluation 32 4.1 Experimental procedure 32 4.2 Results 32 4.2 Results and Discussions 37
CHAPTER FIVE
5.0 Conclusion and recommendation 38 5.1 Conclusion 38 5.2 Recommendation 38
References