CONSTRUCTION OF A MOTORIZED CASSAVA PEELING MACHINE

  • Type: Project
  • Department: Agric Engineering
  • Project ID: AGE0118
  • Access Fee: ₦5,000 ($14)
  • Pages: 32 Pages
  • Format: Microsoft Word
  • Views: 240
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT
 The motorized cassava peeling machine is a type of cassava peeling method that is adopted to reduce drudgery. In cassava peeling operations. This method, unlike the manual peeling method which consumes a lot of human power with subsequent low output produces or peels a large amount of cassava tubers within a small specific of time and small amount of flesh loss and finally low demand of power. this paper presents the design and constructing of a motorized cassava peeling machine that has a very high value of peeling efficiencies when powered electrically and manually. This is done with the help of electric motors, speed ratio, shaft, bolt and lingers, peder, drum design and wood. 

TABLE OF CONTENTS 
Cover page
Title page 
Approval page
Dedication 
Acknowledgment 
Abstract
Table of contents 
List of figures 
 CHAPTER ONE
1.0 INTRODUCTION 1
1.1 Background of the Study  1
1.2 Objectives of The Study 2
1.3 Justification of The Study 2
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 Over View of Cassava Peeling 4
2.2 Definition of Cassava Peeling Machine 7
2.3 Cassava Processing 8
2.3.1 Types Of Cassava Peeling Machines 10
2.3.2 Motorized Cassava A Peeling Machine 11
2.3.3 Manual Cassava Peeling Machine  13

CHAPTER THREE
3.0 CONSTRUCTION TECHNOLOGY
3.1 Materials for the Constructions 14
3.2 Construction procedure 15

CHAPTER FOUR
4.0 PERFORMANCE EVALUATION OF MOTORIZED PEELING MACHINE
4.1 Performance Test18
4.2 Efficiency of Machines     19
4.3 It Show the Performance Evolution Result Of Cassava Peeling Machine 21
CHAPTER FIVE
5.0 CONCLUSION AND RECOMMENDATION
5.1 Conclusion 22
5.2 Recommendation  23
References25



List of table 
Table 1.1: show the sketch of the motorized cassava peeling machine 

List of figure
Figure 3.1: show the performance evaluation results of motorized cassava peeling machine. 












   

CONSTRUCTION OF A MOTORIZED CASSAVA PEELING MACHINE
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Agric Engineering
  • Project ID: AGE0118
  • Access Fee: ₦5,000 ($14)
  • Pages: 32 Pages
  • Format: Microsoft Word
  • Views: 240

500
Leave a comment...

    Related Works

    ABSTRACT There is need for the hygienic processing of cassava prevalent conditions in the commercial grating areas of this staple food show a susceptibility to food contamination.  A home scale cassava grater was improved on in a design and fabrication.  Machine efficiency, safety factors, and portability were considered in this research.  The... Continue Reading
    This project seek to modify the existing cassava grating machine to make it to be self-feeding in operation, to make the operation of the machine easier, safer The existing processing techniques used in the production of cassava starch and cassava dough leaves much to be desired. There are difficulties in the grating of the cassava dough, since... Continue Reading
    This project seek to modify the existing cassava grating machine to make it to be self-feeding in operation, to make the operation of the machine easier, safer The existing processing techniques used in the production of cassava starch and cassava dough leaves much to be desired. There are difficulties in the grating of the cassava dough, since... Continue Reading
    This project seek to modify the existing cassava grating machine to make it to be self-feeding in operation, to make the operation of the machine easier, safer The existing processing techniques used in the production of cassava starch and cassava dough leaves much to be desired. There are difficulties in the grating of the cassava dough, since... Continue Reading
    ABSTRACT The fabrication of the pilot motorized mixer in volved a preliminary computation of the durunsions of the galvanized steel used, marketing out cutting out to sizes folding, welding, assembling and painting. The dimensions of the motorized mixer are as follows: The vessel is of 300min in diameter and 450mm... Continue Reading
    ABSTRACT A motorized mixer of 200 liters capacity was constructed to have the capability of mixing 200 liters of fluid during operation. The construction of the mixer involves the preliminary measures and calculations on the surface area of the metal sheet. Some basic workshop practices was carried out during the construction such as the marking... Continue Reading
    ABSTRACT A motorized mixer of 200 liters capacity was constructed to have the capability of mixing 200 liters of fluid during operation. The construction of the mixer involves the preliminary measures and calculations on the surface area of the metal sheet.  Some basic workshop practices was carried out during the construction such as the marking... Continue Reading
    Limited or poor food separation techniques into fine particles for further processing cause post-harvest losses of food crops and initiates the problem of food and nutritional insecurity in Nigeria. In order to solve this problem, food crops need to be processed into a lasting and nutritious consumable form through the use of mechanization.... Continue Reading
    ABSTRACT The construction of the callophane sealing machine was carried out. The project started with an encompassing review of the various methods of heat sealing film packages. The machine can be used in sealing both low, medium and high-density cellophane. The product has a heating element, which... Continue Reading
    ABSTRACT A Juice extractor machine is a device that is used to extract liquid (Juice) from fruits and vegetables in a process called juicing. The machine is constructed manually with the use of local materials and tools. The material used for the construction of the machine is mild steel sheet. During the... Continue Reading
    Call Us Get this work