DESIGN AND CONSTRUCTION OF A REFRIGERATING UNIT

  • Type: Project
  • Department: Chemical Engineering
  • Project ID: CNG0488
  • Access Fee: ₦5,000 ($14)
  • Pages: 23 Pages
  • Format: Microsoft Word
  • Views: 211
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT
The design and construction of s refrigerating unit is handled from the knowledge of the working principles of laws of thermodynamics.
The size of the containing vessel i.e the case as established to be of 45cm by 32 cm in dimension. The Angle iron mild steel to used in the fabrication and welding. The box case of two layers are fabricated. Plastic (cooler) box is then  placed inside the upper part with the other parts of the refrigerator were brought in. they were all fixed onto a wooden base with all the connections (electrical) made.
The capacity of the refrigerator is based on the workdone by the compressor which is O.I hp in specification. The size of the components used are
i.Condenser: The size is 0.1hp and it is a plate type condenser with extended surface.
ii.Compressor: The size is 0.1hp (75 watts)
iii.Copper wire: it is of 0.5cm in diameter and the total copper wire length is about 600cm (1½ roll)
The introduction of cooling fluid and filling of the compressor enabled the compressor to start functioning when connected to electricity using a 13 AMP rated socket
The interior of the plastic box is lined with dominium box with tubes arranged in convolution around it. This world effectively and cooled the water dropped into it. It compares favorably with the ones in the market.
 
TABLE OF CONTENT
TITLE PAGE
LETTER OF TRANSMITTAL
APPROVAL/CERTIFICATION
DEDICATION
ACKNOWLDEGEMENT
ABSTRCAT
TABLE OF CONTENT

CHAPTER ONE
1.0INTRODUCTION
1.1SCOPE OF THE PROJECT

CHAPTER TWO
HISTORY OF REFRIGERATION
TYPES OF REFRIGERATING DEVICE
USES OF REFRIGERATION


CHAPTER THREE
SEQUENCE OF OPERATIONS
SELECTION OF REFRIGRANTS
CONSTRUCTION PROCEDURE
ECONOMIC ANALYSIS

CHAPTER FOUR
4.1CONCLUSION
4.2RECOMMENDATIONS
REFERENCES.

DESIGN AND CONSTRUCTION OF A REFRIGERATING UNIT
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Chemical Engineering
  • Project ID: CNG0488
  • Access Fee: ₦5,000 ($14)
  • Pages: 23 Pages
  • Format: Microsoft Word
  • Views: 211

500
Leave a comment...

    Related Works

    This work deals extensively with the design and construction of an electrodice display (EOD) with audio unit. The device displays the value of a ludo dice in numerical form and also produces sound as it displays the number. The device works with principle of chance employed by ludo game players. The output of the display is usually very rapid that... Continue Reading
    This work deals extensively with the design and construction of an electrodice display (EOD) with audio unit. The device displays the value of a ludo dice in numerical form and also produces sound as it displays the number. The device works with principle of chance employed by ludo game players. The output of the display is usually very rapid that... Continue Reading
    ABSTRACT Burglar alarm circuit is made up of five major sections. The power supply section; it connects to the source of power, the trigger section which produces trigger current, touch section that controls the supply of power in the circuit, alarm section that sounds when current... Continue Reading
    ABSTRACT This work deals extensively with the design and construction of an electrodice display (EOD) with audio unit. The device displays the value of a ludo dice in numerical form and also produces sound as it displays the number. The device works with principle of chance... Continue Reading
    . ABSTRACT This work deals extensively with the design and construction of an electronic dice display (EOD) with audio unit. The device displays the of a hudo dice in numberical form and also produces sound as it displays the number. The device works with principle of chance... Continue Reading
    ABSTRACT This work deals extensively with the design and construction of an electronic dice display (EOD) with audio unit. The device displays the of a hudo dice in numberical form and also produces sound as it displays the number. The device works with principle of chance... Continue Reading
    ABSTRACT The project of construction is one (1) horse power Air conditioning unit which was executed successfully. With up to seventy five percent (75%) efficient performance. The project started with the construction of the size of the air conditioning unit. The air conditioning unit is 60x40x 45cm in... Continue Reading
    ABSTRACT Distillation unit is the judgment used for the separation of liquid mixture depending on the volatility of the component. It has the top section and bottom section. In the top section this is where more volatile component goes and the bottom section is where the divider or less volatile component... Continue Reading
    ABSTRACT A table top liquid-liquid extraction unit was constructed.  The project also involved the repair and servicing of peristaltic suction pump, by painting it, replacing the connecting cord to the power supply, refilling of the work out suction plates, teeth and general servicing of the equipment.  The glass absorption columns were provided... Continue Reading
    ABSTRACT A table top liquid-liquid extraction unit was constructed. The project also involved the repair and servicing of peristaltic suction pump, by painting it, replacing the connecting cord to the power supply, refilling of the work out suction plates, teeth and general servicing of the equipment. The glass absorption columns were provided as... Continue Reading
    Call Us Get this work