Design And Construction Of A Robotic Arm With Adaptive Behaviour

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0312
  • Access Fee: ₦5,000 ($14)
  • Pages: 76 Pages
  • Format: Microsoft Word
  • Views: 157
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

ABSTRACT 

This project work covers the design and construction of a robotic arm mechanically capable of 5 Degrees of Freedom. It solves the problem of automatically detecting and picking up objects placed within distances of 10-30cm round the robot base platform. It does this by using a simplified forward and inverse kinematic relation modeled in two dimensional robot workspace. The work does not cover the more general case, of an n-linked (n>2) robotic arm working within a three dimensional robot workspace. This later type produces system equations which are too complex to handle at this level of study. As part of building an adaptive behaviour into the robot, a thorough research material on the Adaptive Neuro-Fuzzy Inference System technique was presented and an attempt was made in implementing this on the project. –This technology gives the robot the ability to store angle location of the arm joints for various operations as it is manually controlled. This can then be used as feed data for autonomous repetitive operation. Ethical issues arising from using such automation technologies as robotic arm is discussed in chapter five together with recommendations and future works on the project. 

Design And Construction Of A Robotic Arm With Adaptive Behaviour
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0312
  • Access Fee: ₦5,000 ($14)
  • Pages: 76 Pages
  • Format: Microsoft Word
  • Views: 157

500
Leave a comment...

    Related Works

    ABSTRACT Robotic is an electromechanical system, help improve production accuracy, and reduces time and increase production. In this project a study of 3D robotic ARM design, simulation concepts and theories for the painting of cars that deals with the design, construction, operation, and application of robots is conducted. The simulation covers... Continue Reading
    This project involves the use of an inductive sensor to control a robotic arm system. The signals generated in the induction coil will help in controlling the manipulator to perform certain gripping and grabbing actions. Also, the report describes the method used to acquire and process these induced signals before they are sent (induced signals)... Continue Reading
    TABLE OF CONTENTS Page ABSTRACT ……………………………………………………………………………..iii ACKNOWLEDGEMENTS……..………………………………………………………..iv LIST OF ILLUSTRATIONS………………………………………………………….…vii SECTION 1.... Continue Reading
    TABLE OF CONTENTS Page ABSTRACT ……………………………………………………………………………..iii ACKNOWLEDGEMENTS……..………………………………………………………..iv LIST OF ILLUSTRATIONS………………………………………………………….…vii SECTION 1.... Continue Reading
    ABSTRACT The goal of a network-based IDS is to identify malicious behavior that targets a network and its resources. Intrusion detection parameters are numerous and in many cases they present uncertain and imprecise causal relationships which can affect attack types. A Bayesian Network is known as graphical modeling tool used to model decision... Continue Reading
    ABSTRACT In our present society, wireless communication has become most prevalent and mobile units (hand held devices /GSM/ Computers) are one of the most common equipments for conveying messages wirelessly. Owing to the fact that most youths in our society today on the average make use of at least one wireless device that communicate with other... Continue Reading
    ABSTRACT In our present society, wireless communication has become most prevalent and mobile units (hand held devices /GSM/ Computers) are one of the most common equipments for conveying messages wirelessly. Owing to the fact that most youths in our society today on the average make use of at least one wireless device that communicate with other... Continue Reading
    ABSTRACT An inverter is an electronic device that converts direct current (DC­) to alternating current (AC) the converted Ac can be at any required voltage and frequency with the use of appropriate transformers, switching and control circuit. It’s simple put, is an electronic box that makes household electricity for everyday items.  It... Continue Reading
    CHAPTER ONE INTRODUCTION All modern engineering system includes certain aspects of control system at some point in their broadcast scenes, control engineering and the associated theory are concerned with the means of making system to behave in a desired may.  The system on this thesis is a DC ' AC... Continue Reading
    ABSTRACT This write up is a detail of the process and formulation of plan for the physical realization of the construction of a refrigerator. It is divided into chapter, which discussed extensively the practical refrigeration cycle with full attention given to design factors, working principle and choice of material. The method used in... Continue Reading
    Call Us Get this work