THE DESIGN AND IMPLEMENTATION OF RADIO FREQUENCY COMMUNICATION LINK

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0351
  • Access Fee: ₦5,000 ($14)
  • Pages: 66 Pages
  • Format: Microsoft Word
  • Views: 166
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

ABSTRACT

The aim of this project, the design and implementation of an RF communication link, is to design a communication link between a source and a destination and study the properties of the signal being generated by the source (generator). The area of interest in this work is how the signal suffers limitations like attenuation, interference and distortion etc and to observe how these limitations affect the smooth transmission of the signal as well as the amplitude of the transmitted signal. This study was implemented using simulink and it was discovered that the higher the pathloss, that is, the higher the effect of attenuation, distortion etc, the lower the amplitude. Therefore, for a better signal, that is, with high amplitude, there should be a minimal or no effect of the aforementioned limitations. Also, the maximum Doppler shift of the channel can be varied to achieve desired signal amplitude. In this project, observation has shown that, the higher the maximum Doppler shifts of the Rayleigh channel, the higher the amplitude and the stronger the signal strength.  

 

 

 

 

 

 

 

 

 

TABLE OF CONTENTS

Cover Page      -           -           -           -           -           -           -           -           -           i

Title Page        -           -           -           -           -           -           -           -           -           ii

Approval Page            -           -           -           -           -           -           -           -           -           iii

Certification    -           -           -           -           -           -           -           -           -           iv

Dedication      -           -           -           -           -           -           -           -           -           v

Acknowledgement      -           -           -           -           -           -           -           -           vi

Abstract          -           -           -           -           -           -           -           -           -           vii

Table of Contents       -           -           -           -           -           -           -           -           viii

List of Figures/Tables -           -           -           -           -           -           -           -           xi

CHAPTER ONE

1.0              Introduction to Radio Frequency Communication Link        -           -           1

1.1              Elements of Radio Frequency Communication Link -           -           -           1

1.1.1        Free Space Communication    -           -           -           -           -           -           1

1.1.2        Radio Frequency         -           -           -           -           -           -           -           1

1.1.3        Transmitter      -           -           -           -           -           -           -           -           2

1.1.4        Transmission Medium -           -           -           -           -           -           2

1.1.4.1  Rayleigh Channel        -           -           -           -           -           -           -           2

1.1.4.2  Binary Symmetric Channel (BSC)      -           -           -           -           -           3

1.1.4.3  AWGN Channel (Additive White Gaussian Noise)   -           -           -           3

1.1.4.4  Rayleigh Distribution  -           -           -           -           -           -           -           3

1.1.5        Distortion        -           -           -           -           -           -           -           -           3

1.1.6        Random Signals          -           -           -           -           -           -           -           4

1.1.7        Receiver          -           -           -           -           -           -           -           -           4

1.2              Problem Definition     -           -           -           -           -           -           -           4

1.3              Development of System Block Diagram        -           -           -           -           5

1.3.1        Rayleigh Channel Link           -           -           -           -           -           -           5

1.3.2        Factors Influencing Radio Frequency Communication Link -           -           6

 

CHAPTER TWO

2.0              Radio Frequency Communication Link Theory         -           -           -           8

2.1              Antenna Gain  -           -           -           -           -           -           -           -           10

2.2              Noise Link Equation in Rayleigh Channel     -           -           -           -           10

2.3              Properties of Rayleigh Channel in Free Space            -           -           -           11

2.3.1        Attenuation     -           -           -           -           -           -           -           -           11

2.3.2        Noise   -           -           -           -           -           -           -           -           -           12

2.3.3        Interference     -           -           -           -           -           -           -           -           13

2.4              Free Space Rayleigh Propagation Channel     -           -           -           -           13

2.4.1        Transmitting Antenna Gain    -           -           -           -           -           -           15

CHAPTER THREE

3.0              Design Consideration -           -           -           -           -           -           -           16

3.1              Mathematical Analysis of Rayleigh Channel Model Link      -           -           16

3.1.1        Transmitting Link Noise in Rayleigh Channel            -           -           -           17

3.1.2        Receiving Link Noise in Rayleigh Channel    -           -           -           -           18

3.1.3        Raleigh Channel Attenuation Loss     -           -           -           -           -           18

3.1.4        Carrier-to-Noise Ratio of Link Design at the Transmitter                  -           19

3.1.5        Carrier-to-Noise Ratio of Link Design at the Receiver          -           -           19

3.1.6        Transmitting Parameters for RAYLEIGH Link Design         -           -           19

3.1.7        Transmitter Antenna Gain (Gt)           -           -           -           -           -           20

3.1.8        Transmitting Power (Pt)          -           -           -           -           -           -           21

3.1.9        Transmitting Frequency in Rayleigh Channel Link    -           -           -           22

3.1.10    Transmitting Signal Energy Link for Rayleigh Channel         -           -           23

3.2              Receiving Signal Energy for Rayleigh Channel         -           -           -           23

3.3              Free Space Pathloss (PL), Between the Transmitter and Receiver     -           25

3.3.1        Rayleigh Channel Attenuation Loss   -           -           -           -           -           25

3.3.2        For Rayleigh Doppler Shift    -           -           -           -           -           -           26

3.4       Analysis of Receiving Attenuation and Noise Increase on Link Design       27

3.5       Link Design and Analysis       -           -           -           -           -           -           27

3.5.1    Input   -           -           -           -           -           -           -           -           -           27

3.5.2    Random Integer Generator     -           -           -           -           -           -           28

3.5.3    DBPSK           -           -           -           -           -           -           -           -           28

3.5.4    Complex to Real-Imag 1         -           -           -           -           -           -           29

3.5.5    Scope 2           -           -           -           -           -           -           -           -           29

3.5.6    Rayleigh Channel        -           -           -           -           -           -           -           30

3.5.7    Free Space Pathloss    -           -           -           -           -           -           -           30

3.5.8    Complex to Real Imag 2         -           -           -           -           -           -           30

CHAPTER FOUR

4.0              Implementation Model           -           -           -           -           -           -           32

4.1              Analysis of Simulink Blocks   -           -           -           -           -           -           32

4.1.1        Input   -           -           -           -           -           -           -           -           -           32

4.1.2        DBPSK           -           -           -           -           -           -           -           -           33

4.1.3        Rayleigh Fading Channel       -           -           -           -           -           -           33

4.1.4        Complex to Real-Image 1       -           -           -           -           -           -           34

4.1.5        Scope  -           -           -           -           -           -           -           -           -           34

4.2              Simulink Connection  -           -           -           -           -           -           -           34

4.3              Simulation of Rayleigh Link   -           -           -           -           -           -           35

4.4              Interpretation of Results         -           -           -           -           -           -           36

4.4.1    The Comparison of the Input and Output Waveforms for 0dB, 1dB, 3dB

and 7dB Pathloss at 0.1MHz Maximum Doppler Shift         -           -           38

4.4.2    Comparison of the Input and Output Signals for 0dB, 3dB and 7dB Pathloss

at 0.05MHz Maximum Doppler Shift -           -           -           -           -           44

CHAPTER FIVE

5.0              Conclusion      -           -           -           -           -           -           -           -           52

5.1       Recommendations      -           -           -           -           -           -           -           53

References     -           -           -           -           -           -           -           -           -           54

 

 

LIST OF FIGURES/TABLES

List of Figures

Fig. 1.1: Development of System Block Diagram      -           -           -           -           5

Fig. 1.2: Block Diagram for Rayleigh Channel          -           -           -           -           5

Fig. 2.1: Transmission Antenna          -           -           -           -           -           -           14

Fig. 3.1: Impulse Response of Rayleigh Channel       -           -           -           -           16

Fig. 3.2: The Design of Simulink Block for Rayleigh Channel          -           -           31

Fig. 4.1: Input Waveform for Rayleigh Channel        -           -           -           -           36

Fig. 4.2: Output Waveform for Rayleigh Channel at 7dB     -           -           -           37

Fig. 4.3: Input and Output Waveforms for Rayleigh Channel at 0dB Pathloss and

0.1MHz Max. Doppler Shift   -           -           -           -           -           -           40

Fig. 4.4: Input and Output Waveforms for Rayleigh Channel at 1dB Pathloss and

0.1MHz Max. Doppler Shift   -           -           -           -           -           -           41

Fig. 4.5: Input and Output Waveforms for Rayleigh Channel at 3dB Pathloss and

0.1MHz Doppler Shift            -           -           -           -           -           -           42

Fig. 4.6: Input and Output Waveforms for Rayleigh Channel at 7dB Pathloss and

0.1MHz Doppler Shift            -           -           -           -           -           -           43

Fig. 4.7: Input and Output Waveforms for Rayleigh Channel at 0dB Pathloss and

0.05MHz Doppler Shift          -           -           -           -           -           -           47

Fig. 4.8: Input and Output Waveforms for Rayleigh Channel at 1dB Pathloss and

0.0.5MHz Doppler Shift         -           -           -           -           -           -           48

Fig. 4.9: Input and Output Waveforms for Rayleigh Channel at 3dB Pathloss and

0.05MHz Doppler Shift          -           -           -           -           -           -           49

Fig. 4.10: Input and Output Waveforms for Rayleigh Channel at 3dB Pathloss and

0.1MHz Doppler Shift            -           -           -           -           -           -           50

 

List of Tables

Table 4.1: Input Table for Rayleigh Channel Waveform        -           -           -           36

Table 4.2: Output Table of Rayleigh Channel Link at 7dB    -           -           -           37

Table 4.3: For Input and Output Waveform at 0.1MHz for 0dB       -           -           39

Table 4.4: For Input and Output Waveform at 0.1MHz for 1dB       -           -           39

Table 4.5: For Input and Output Waveform at 0.1MHz for 3dB       -           -           39

Table 4.6: For Input and Output Waveform at 0.1MHz for 7dB       -           -           40

Table 4.7: Comparing and Contracting the Input and Output Signals at 0.1MHz Max.

Doppler Shift                    -           -           -           -           -           -           44

Table 4.8: For Input and Output Waveform at 0.05MHz for 0dB     -           -           45

Table 4.9: For Input and Output Waveform at 0.05MHz for 1dB     -           -           45

Table 4.10: For Input and Output Waveform at 0.05MHz for 3dB   -           -           46

Table 4.11: For Input and Output Waveform at 0.05MHz for 7dB   -           -           46

Table 4.12: Comparing and Contrasting the Input and Signals at 0.05MHz Max.

Doppler Shift-     -           -           -           -           -           -           -           51

THE DESIGN AND IMPLEMENTATION OF RADIO FREQUENCY COMMUNICATION LINK
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0351
  • Access Fee: ₦5,000 ($14)
  • Pages: 66 Pages
  • Format: Microsoft Word
  • Views: 166

500
Leave a comment...

    Related Works

    TABLE OF CONTENTS DECLARATION ..................................................................................................................i APPROVAL.........................................................................................................................ii... Continue Reading
    THE DESIGN AND CONSTRUCTION OF MINI RADIO BROADCAST TRANSMITTERAND AUDIO CONSOLE USING FREQUENCYMODULATION (FM) WITH POWER RATING OF 1 WATT ABSTRACT The early transmitter for radio broadcasting is so big and bulky that they do occupy numerous spaces. The circuitries are mainly designed with valves, which are big in sizes. With the advent of... Continue Reading
    TABLE OF CONTENTS CHAPTER ONE 1.1               INTRODUCTION 1.2         BACKGROUND OF THE STUDY 1.3       STATEMENT OF THE PROBLEMS 1.4       OBJECTIVES OF THE STUDY 1.5         SIGNIFICANCE OF THE STUDY 1.6       SCOPE OF THE STUDY 1.7       LIMITATION OF THE STUDY 1.8       DEFINITION OF... Continue Reading
    This project is mainly intended to prevent the usage of mobile phones in places inside it coverage without interfering with communication channels outside it range, thus providing a cheap and reliable method for blocking mobile communication in the required restricted area only. Although we must be aware of the fact that nowadays lot of mobile... Continue Reading
    CHAPTER ONE INTRODUCTION A wireless signal jammer is a device that blocks the transmission by createing interference. This wireless signal jammer can be classified as Radio Frequency Interference (RF) and GSM jammer. A radio frequency jammer is a device used to disrupt or prevent communication through a broadcast RF signal. It is a GSM RF... Continue Reading
    Abstract A wireless signal jammer is a device which blocks transmission by creating interference. This wireless signal jammer can be categorized into the Radio Frequency (RF) jammer and GSM jammer. A Radio Frequency jammer is a device used to disrupt or prevent communication via a broadcasted RF signal. It is an RF and GSM frequency disrupter... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1           Introduction A wireless signal jammer is a device which blocks transmission by creating interference. This wireless signal jammer can be categorized into the Radio Frequency (RF) jammer and GSM jammer. A Radio Frequency jammer is a device used to disrupt or prevent communication via a broadcasted... Continue Reading
    Abstract A wireless signal jammer is a device which blocks transmission by creating interference. This wireless signal jammer can be categorized into the Radio Frequency (RF) jammer and GSM jammer. A Radio Frequency jammer is a device used to disrupt or prevent communication via a broadcasted RF signal. It is an RF and GSM frequency disrupter... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1 Introduction A wireless signal jammer is a device which blocks transmission by creating interference. This wireless signal jammer can be categorized into the Radio Frequency (RF) jammer and GSM jammer. A Radio Frequency jammer is a device used to disrupt or prevent... Continue Reading
    Bus ticketing process in Africa is one of the slowest and time wasting yet it is the mains means of travel between the capital cities to major towns. Currently use of mobile telephone is widespread and considerable penetration has been achieved. In Uganda the application of SMS-based bus ticketing system is yet to be explored. This comes in the... Continue Reading
    Call Us Get this work