Voltage Collapse in Power System

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0372
  • Access Fee: ₦5,000 ($14)
  • Pages: 12 Pages
  • Format: Microsoft Word
  • Views: 180
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

The power system is a highly nonlinear system that operates in a constantly changing environment; loads, generator outputs, voltage controllers, transmission lines, topology, and key operating parameters change continually. The behavior and output of the generators can be affected in a transient conditions. This transient condition can change the excitation and dynamics of the rotor which in turn produces undesirable oscillations of the system frequency and voltage magnitude. When subjected to a transient disturbance, the stability of the system depends on the nature of the disturbance as well as the initial operating condition. The disturbance may be small or large. Small disturbances in the form of load changes occur continually, and the system adjusts to the changing conditions. When power system becomes more complex with heavier loads connected to the system, the control of the voltage becomes an important issue. The complexity of the network and the addition of heavier loads can result to a stressful operating condition which can cause system instability resulting to voltage collapse which leads to power blackout.

 TABLE OF CONTENTS

 

1.           INTRODUCTION.. 3

2.           Type 4 wind turbines generators...............................................................................4                                                                                          2.1         Operational behaviour of type 4 wind turbines. 4

3.            SYNCHRONOUS GENERATOR. 7

4.           POWER CONVERTER FOR WIND TURBINE GENERATOR SYSTEM 5

4.1.        Three phase AC/DC converter on the generator side. 6

4.1.1      Three phase  DC/AC converter on the grid side. 6

4.1.2       Reasons for not using diode bridge on the generator side. 7

4.1.3       Diode rectifier based converter. 7

5.            REACTIVE POWER AND VOLTAGE CONTROL. 7

5.1.         Reactive power generation and absorption on the grid side. 9

    5.1.1       Reactive power compensation for wind power plants…………………………….9

5.1.2    Mechanically-switched shunt and regulated reactors...............................................9

5.1.3       STATCOM System.. 10

6.            CONCLUSIONS.........................................................................................................15

                        

                    References…………………………………………………………………………………………..…………..…15

                    Appendix

                      List of Figures

                      Figure 1 Full conversion type 4 wind turbine …………………………………………………………....4

                      Figure 2: Type 4 WTG Short Circuit Current …………………….. ...........................................4

                      Figure 3: Synchronous Generator ………………………….......................................................5

                      Figure 4: Output voltage of back to back converter ………............................................ 6

                      Figure 5: Input current of back to back converter………………........ ……………………….……..6

                      Figure 6: Input current of diode rectifier based converter……………………………………….……….7

                      Figure 7: Reactive power control functions for Renewable power plants ………………….…...8

                      Figure 8: Voltage control for the RPP ………………………………………………..............................8

                      Figure 9: Reactive power requirement of Wind energy facilities……………………….……..9

                      Figure10: STATCOM description ………………………………..………………………………….………...11

                      Figure11: Operating principle and operation area of STATCOM ……………………..…...11

                      Figure12: Voltage (pu values) at wind turbine connection point …………….……………….12

                      Figure13: STATCOM Reactive power in MV Ar …………………………………………………......…12

                      Figure14: Voltage at wind turbine connection point with no reactive power injection……..13

                      Figure15: Reactive power injected to the grid by STATCOM …………………….....………...13

                      Figure16: : P-V curves. With reactive power injection of STATCOM.….………………………......14

Voltage Collapse in Power System
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0372
  • Access Fee: ₦5,000 ($14)
  • Pages: 12 Pages
  • Format: Microsoft Word
  • Views: 180

500
Leave a comment...

    Related Works

    ABSTRACT  The basic idea deals with detecting the voltage collapse ahead of time to provide  the operators a lead time for remedial actions and for possible prevention of  blackouts. To detect cases of voltage collapse, pattern recognition in conjunction  with power system simulator for engineering (PSSE) program was created and then ... Continue Reading
    ABSTRACT The basic idea deals with detecting the voltage collapse ahead of time to provide the operators a lead time for remedial actions and for possible prevention of blackouts. To detect cases of voltage collapse, pattern recognition in conjunction with power system simulator for engineering (PSSE) program was created and then deployed in... Continue Reading
    ABSTRACT As new ideas unfold and technology become advanced with business increasingly being dependent on technology for their fundamental operation; the need for system availability is of paramount importance.           Uninterruptible power supply [INVERTER] maintain continuous supply of electric power to certain essential equipment... Continue Reading
    ABSTRACT This project is he design and construction of a voltage inverter system with trickle charging system. This device is design to provide power supply for the need of offices, household etc. In absence of NEPA power supply. It would also prevent harm to our appliances caused by power holding company LTD (NEPA) Random power outage . TABLE OF... Continue Reading
    ABSTRACT This project is he design and construction of a voltage inverter system with trickle charging system. This device is design to provide power supply for the need of offices, household etc. In absence of NEPA power supply. It would also prevent harm to our appliances caused by power holding company LTD (NEPA) Random power outage . TABLE OF... Continue Reading
    ABSTRACT This project is he design and construction of a voltage inverter system with trickle charging system. This device is design to provide power supply for the need of offices, household etc. In absence of NEPA power supply. It would also prevent harm to our appliances caused by power holding company LTD (NEPA) Random power outage . TABLE OF... Continue Reading
    ABSTRACT-Power system planning is a vast and important issue for operation and expansion of power delivery. One of the basic objectives of planning is to determine the right schedule for investment in new devices which ensures secure and economic power delivery for predicted customer demand. System planning also addresses the question of reliable... Continue Reading
    ABSTRACT-Power system planning is a vast and important issue for operation and expansion of power delivery. One of the basic objectives of planning is to determine the right schedule for investment in new devices which ensures secure and economic power delivery for predicted customer demand. System planning also addresses the question of reliable... Continue Reading
    L (A CASE STUDY OF COMPUTER SCIENCE ND SOFTWARE LAB) CHAPTER ONE INTRODUCTION 1.1   BACKGROUND TO THE STUDY The use of renewable energy increased greatly just after the first big oil crisis in the late seventies. At that time, economic issues were the most important... Continue Reading
      TABLE OF CONTENTS DECLARATION i DEDICATION ii COPYRIGHT iii ACKNOWLEDGEMENTS iv ABSTRACT v LIST OF TABLES vii LIST OF FIGURES viii LIST OF ACCRONYMS AND ABBREVIATIONS ix OPERATIONAL DEFINITION OF TERMS x INTRODUCTION 1 1.0 Background of the Study 1 1.2 Solar Power System 2 1.3 Operating Principle of the DSTATCOM 3 1.4. Modelling of PV Array 5... Continue Reading
    Call Us Get this work