CONSTRUCTION OF A 12VDC TO 230VAC POWER INVERTERS

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0382
  • Access Fee: ₦5,000 ($14)
  • Pages: 60 Pages
  • Format: Microsoft Word
  • Views: 210
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

ABSTRACT

This project is titled the construction of a DC to AC inverter system. It is constructing to meet up with the power demand in the offices and in homes in the absence of power supply from the power holding company of Nigeria, PHCN. In order words the device / item serves as a substitute for PHCN which almost monopolises the power supply to people.

It is constructing in such a way that it will take up 12v DC from battery and inverts it to an output of 230v, 50Hz AC. It makes no noise during operation and no hazardous carbon monoxide is generated in the surrounding.   

This is a feature that makes it safe to use any where when compared to generator.This work is aimed at designing a modified sine wave inverter that can be used to power appliances both in homes and industries.

                           

TABLE OF CONTENTS

TITLE PAGE 

APPROVAL PAGE 

DEDICATION 

ACKNOWLEDGEMENT 

ABSTRACT 

TABLE OF CONTENT 

CHAPTER ONE 

1.0INTRODUCTION 

1.1 OBJECTIVE OF THE PROJECT

1.2SIGNIFICANCE OF THE PROJECT

1.3    APPLICATION OF THE PROJECT

1.4SCOPE OF THE PROJECT

1.5LIMITATION OF THE PROJECT

1.6PURPOSE OF THE PROJECT

1.7PROJECT ORGANISATION

CHAPTER TWO

2.0     LITERATURE REVIEW

2.1REVIEW OF HISTORY OF AN INVERTER

2.2   REVIEW OF HOW TO CHOOSING THE RIGHT INVERTER

2.3REVIEW OF THE DIFFERENCE BETWEEN SINE WAVE AND MODIFIED SINE WAVE   INVERTER.

2.4REVIEW OF INVERTER CAPACITY

2.5SAFETY OF INVERTER

2.6 INVERTER RATING

2.7WHY CHOOSE A MODIFIED SINE WAVE INVERTER?

2.8TYPES OF INVERTER

CHAPTER THREE

3.0     CONSTRUCTION

3.1BASIC DESIGNS OF AN INVERTER 

3.2      BLOCK DIAGRAM OF THE SYSTEM

3.3SYSTEM OPERATION

3.4CIRCUIT DIAGRAM

3.5CIRCUIT DESCRIPTION

3.6     DESCRIPTION OF COMPONENTS USED

3.7      HOW TO CHOOSE A RIGHT INVERTER AND BATTERY

3.8HOW TO CHOOSE THE BEST INVERTER BATTERY

CHAPTER FOUR

RESULT ANALYSIS

4.0CONSTRUCTION PROCEDURE AND TESTING 

4.1CASING AND PACKAGING 

4.2ASSEMBLING OF SECTIONS 

4.3TESTING OF SYSTEM OPERATION

4.4      COST ANALYSIS     

CHAPTER FIVE     

5.0CONCLUSION 

5.1RECOMMENDATION 

5.2REFERENCES


CONSTRUCTION OF A 12VDC TO 230VAC POWER INVERTERS
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0382
  • Access Fee: ₦5,000 ($14)
  • Pages: 60 Pages
  • Format: Microsoft Word
  • Views: 210

500
Leave a comment...

    Related Works

    TABLE OF CONTENTS TITLE PAGE  APPROVAL PAGE  DEDICATION  ACKNOWLEDGEMENT  ABSTRACT  TABLE OF CONTENT  CHAPTER ONE  1.0 INTRODUCTION  1.1 OBJECTIVE OF THE PROJECT 1.2 SIGNIFICANCE OF THE PROJECT 1.3    APPLICATION OF THE PROJECT 1.4 SCOPE OF THE PROJECT 1.5 LIMITATION OF THE PROJECT 1.6 PURPOSE OF THE PROJECT 1.7 PROJECT ORGANISATION... Continue Reading
    TABLE OF CONTENTS TITLE PAGE  APPROVAL PAGE  DEDICATION  ACKNOWLEDGEMENT  ABSTRACT  TABLE OF CONTENT  CHAPTER ONE  1.0INTRODUCTION  1.1 OBJECTIVE OF THE PROJECT 1.2SIGNIFICANCE OF THE PROJECT 1.3    APPLICATION OF THE PROJECT 1.4SCOPE OF THE PROJECT 1.5LIMITATION OF THE PROJECT 1.6PURPOSE OF THE PROJECT 1.7PROJECT ORGANISATION CHAPTER... Continue Reading
    CHAPTER ONE INTRODUCTION The quest to satisfy our need for stable power supply in Nigeria has driven most Nigerians into an ardent search for alternative renewable power sources. One of such major renewable power source in use is solar energy, which is energy obtained from the radiation of the sun. To obtain electrical power from the sun, four key... Continue Reading
    PREFACE The aim of this project is to construct power amplifier. The system is expected to amplify. The major components in the circuit is the integrated circuit (IC JRE with some circuit elements for the normal operation of the circuit. So as to amplifier an output, the general construction dealt with in the chapters. The levels of treatments... Continue Reading
    PREFACE The aim of this project is to construct power amplifier.  The system is expected to amplify.  The major components in the circuit is the integrated circuit (IC JRE with some circuit elements for the normal operation of the circuit.  So as to amplifier an output, the general construction dealt with in the chapters. The levels of... Continue Reading
    ABSTRACT A Low Power Indicator is a device that indicates by way of displaying light to indicate the level or strength of electrical power in a given circuit at a particular time. The transistors T1, T2, T3 are low power transistors that control the flow of electron in the circuit VR1 is employed to vary the frequency of the power.       ... Continue Reading
    ABSTRACT This work is a power supply monitoring device that triggers a buzzer when the mains supply cuts off. Thus a diode (bridge rectifier diode) was used to convert the AC voltage to DC voltage and the 240v/12v AC mains power transfer was used with a bridge rectifier for rectification and a 470Nf filter capacitor C1 for the smoothing of the... Continue Reading
    ABSTRACT Uninterruptible power supplies (UPS) are used to provide power when regular utility power is unavailable.  Although they are commonly used for providing power in remote locations or emergencies, this is not because they are the same as auxiliary power units, emergency power units or standby generators. Unlike the aforementioned power... Continue Reading
    ABSTRACT Power inverter is an electrical appliance that can be used with DC battery as an alternativesource of energy supply in the event of power failures and energy crisis. It is cheap, clean,very conducive and silent when in operation and a very reliable source of power supply as togenerator. Modern research and technologies have shown that... Continue Reading
    ABSTRACT Power inverter is an electrical appliance that can be used with DC battery as an alternativesource of energy supply in the event of power failures and energy crisis. It is cheap, clean,very conducive and silent when in operation and a very reliable source of power supply as togenerator. Modern research and technologies have shown that... Continue Reading
    Call Us Get this work