CONSTRUCTION OF 150 WATTS 162 AUDIO LOUDSPEAKER

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0398
  • Access Fee: ₦5,000 ($14)
  • Pages: 35 Pages
  • Format: Microsoft Word
  • Views: 173
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT 
Audio loudspeaker (output transducer) is on of the most essential and powerful device used in telecommunication system. This is device capable of converting electrical signal into sound and vice versa. It is made up of few time of non-magnetic wire wound on a light cylindrical former that is mounted so that it can move freely insides the magnetic field of a strong permanent magnet. The speaker cone it attached to the voice coil and attached with a flexible mounting to outer ting of the speaker support.
The device  was contracted and operated based on the principles of electromagnetic   induction which was  clearly stated by faradays and langue laws of electromagnetic induction. This speaker has power rating of low watts and 16ohms impedance 
The materials used in made up of particle board of ¾ thickness tweeter and cross over network..
This device constructed locally can compete favourably well with the imported one (with international standard) the information in this write up comprises of the construction operation a detailed information of each component parts and various used of output transducer (loudspeaker).

TABLE OF CONTENT 
Title page
Certification 
Dedication 
Abstract
Table of content 

CHAPTER ONE 
Introduction
Background information 
Aim

CHAPTER TWO 
Literature review
Function of various parts of loudspeaker 
Working principles of a loudspeaker 

CHAPTER THREE
Meaning of crossover 
Component parts of crossover 
Crossover design 
General methodology of crossover design 

CHAPTER FOUR  
Meaning of a tweeter 
Operation of a tweeter 
Dome fluid 
Ferro fluid
Types of tweeter 

CHAPTER FIVE
Requirement of enclosure
Types of infinite battle enclosure

CONSTRUCTION OF 150 WATTS 162 AUDIO LOUDSPEAKER
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0398
  • Access Fee: ₦5,000 ($14)
  • Pages: 35 Pages
  • Format: Microsoft Word
  • Views: 173

500
Leave a comment...

    Related Works

    ABSTRACT An audio AMP is basically a system which is used as a means of increasing the level of sound or audio signals for maximum use. A public address system consists basically of microphone, Amplifier and speaker(s) to facilitate the communication to intelligible speech to groups of people... Continue Reading
    ABSTRACT It has become inevitable that there would be communication and due to the inherent limitation of the human voice, the public address system came to being. A public address or “P.A SYSTEM” is an electronic amplification system with a mixer  ,amplifier and loudspeakers, used to reinforce a given sound , e.g a person making a speech,... Continue Reading
    ABSTRACT The project work on construction of loud speaker involves some critical research and study concerned electromagnetic induction effect in transducers like loud speaker and its associated parameter required to chose a very good one this parameters are the power rating of loud speaker and the coil. The sizes were also put into consideration.... Continue Reading
    ABSTRACT  The project work on construction of loud speaker involves some critical research and study concerned electromagnetic induction effect in transducers like loud speaker and its associated parameter required to chose a very good one this parameters are the power rating of loud speaker and the coil. The sizes were also put into... Continue Reading
    ABSTRACT The topic of this project is ' Audio Amplifier'. The research embarked upon this study or project by using both primary and secondary source of data. The main instrument used for data collection are: Modern electronics circuit Design. By David J. Commer. Electronics Devices. By Floyd... Continue Reading
    Amplifiers, which are devices that increase the gain of an audio signal, dominate modern audio technologies. In this project, we designed and built an audio amplifier from scratch in order to demonstrate that such a key device can be constructed using basic electrical engineering principles. After performing major circuit calculations by hand, we... Continue Reading
    Amplifiers, which are devices that increase the gain of an audio signal, dominate modern audio technologies. In this project, we designed and built an audio amplifier from scratch in order to demonstrate that such a key device can be constructed using basic electrical engineering principles. After performing major circuit calculations by hand, we... Continue Reading
    This work deals extensively with the design and construction of an electrodice display (EOD) with audio unit. The device displays the value of a ludo dice in numerical form and also produces sound as it displays the number. The device works with principle of chance employed by ludo game players. The output of the display is usually very rapid that... Continue Reading
    ABSTRACT This work deals extensively with the design and construction of an electronic dice display (EOD) with audio unit. The device displays the of a hudo dice in numberical form and also produces sound as it displays the number. The device works with principle of chance... Continue Reading
    ABSTRACT This work deals extensively with the design and construction of an electrodice display (EOD) with audio unit. The device displays the value of a ludo dice in numerical form and also produces sound as it displays the number. The device works with principle of chance... Continue Reading
    Call Us Get this work