CONSTRUCTION OF A STEP DOWN TRANSFORMER FORM 220V TO 24:12V

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0404
  • Access Fee: ₦5,000 ($14)
  • Pages: 14 Pages
  • Format: Microsoft Word
  • Views: 171
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT 
This project write up of a step – down transformer from 220v to 24v:12v, this is to expose what a transformer is all about and its important and uses.
The aim of the project, step-down transformer is to show Electrical and Electronics Engineering, could step-down the voltage from 220v to 24:12v, and fro this project write up. They are divided into chapter by chapter. 

0.1Chapter one is the introduction to a step – down transformer from 220v to 24:12v.
1.1Back ground 
1.2Aim / Objective / Purpose 
1.3.Scope of the project 
This chapter tells mostly what a transformer is all about.    
ii.Chapter tow is the literature review 
iii.Chapter three 
0.1Description of the system & diagram 
1.1Procedure of the construction 
1.2Calculation of the project 
iv.Chapter four is the 
0.1Result and Conclusion 
1.1Cost of material Used 

TABLE OF CONTENT
Title Page 
Dedication 
Acknowledgement 
Abstract 
Approval Page 
Price List / Cost of Materials 
Table of Content 

CHAPTER ONE
1.0 Introduction to a step – down transformer 
1.1 Back Ground 
1.2 Aim / Objective / Purpose 
1.3 Scope of the Project  

CHAPTER TWO 
Literature Review

CHAPTER THREE   
3.0 Description of the System and Diagram
3.1 Procedure of the Construction 
3.2 Calculation 

CHAPTER FOUR 
4.0 Result and Conclusion 
4.1 Cost of Material 


CONSTRUCTION OF A STEP DOWN TRANSFORMER FORM 220V TO 24:12V
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0404
  • Access Fee: ₦5,000 ($14)
  • Pages: 14 Pages
  • Format: Microsoft Word
  • Views: 171

500
Leave a comment...

    Related Works

    ABSTRACT  This project write up of a step – down transformer from 220v to 24v:12v, this is to expose what a transformer is all about and its important and uses. The aim of the project, step-down transformer is to show Electrical and Electronics Engineering, could step-down the voltage from 220v to 24:12v, and fro this project write up.... Continue Reading
    ABSTRACT  This project write up of a step – down transformer from 220v to 24v:12v, this is to expose what a transformer is all about and its important and uses. The aim of the project, step-down transformer is to show Electrical and Electronics Engineering, could step-down the voltage from 220v to 24:12v, and fro this project write up.... Continue Reading
    ABSTRACT Transformer is one of the indispensable devices mostly in Electric Power Transmission, Transformer Step-down or Step-up, the output voltage/current to the design requirement. This project was meant to show the necessary step and methods of designing and constructing a typical step-up auto transformer with tapping. In this project, we... Continue Reading
    ABSTRACT  This is a technical project write-up design and construction were carried out by me with deep intensive and extensive research work.  I all give credit to the authors of the textbooks whose I referred to in the cause of writing this project and its subsequent design and construction. In this project, I shed light on the basic principle... Continue Reading
    ABSTRACT This is a technical project write-up design and construction were carried out by me with deep intensive and extensive research work under the strict supervisor of Engr K.C Ugwu.  I all give credit to the authors of the textbooks whose I referred to in the cause of writing this project and its subsequent design and construction. In this... Continue Reading
    ABSTRACT This is a technical project write-up design and construction were carried out by me with deep intensive and extensive research work. I all give credit to the authors of the textbooks whose I referred to in the cause of writing this project and its subsequent design and construction. In this project, I shed light on the basic principle of... Continue Reading
    ABSTRACT A Linear  Variable Differential Transformer (LVDT) was constructed having a primary winding of 245 turns and two secondary windings of 100 turns each. The device was calibrated with a graduated cylindrical rod. The graduated rod when inserted between the hollow tube which has the windings gave output voltages of ±0.046V, ±0.51V,... Continue Reading
    ABSTRACT A Linear  Variable Differential Transformer (LVDT) was constructed having a primary winding of 245 turns and two secondary windings of 100 turns each. The device was calibrated with a graduated cylindrical rod. The graduated rod when inserted between the hollow tube which has the windings gave output voltages of ±0.046V, ±0.51V,... Continue Reading
    ABSTRACT This project work-up deals on the design and construction of a single phase step down nations fermor, with raking IKVA, 240V/11OV, 80V 12U, 6V. It is a multi-circuit transformer that has one input as the primary and tappins to produce the output (secondary). It is considered as a single coil in series with the supply and a common coil to... Continue Reading
    ABSTRACT This project work-up deals on the design and construction of a single phase step down nations fermor, with raking IKVA, 240V/11OV, 80V 12U, 6V. It is a multi-circuit transformer that has one input as the primary and tappins to produce the output (secondary). It is considered as a single coil in series with the supply and a common coil to... Continue Reading
    Call Us Get this work