THE DESIGN AND CONSTRUCTION OF A 220 / 12 VOLTS SINGLE PHASE STEP-DOWN TRANSFORMER

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0418
  • Access Fee: ₦5,000 ($14)
  • Pages: 24 Pages
  • Format: Microsoft Word
  • Views: 177
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT 
This is a technical project write-up design and construction were carried out by me with deep intensive and extensive research work. 
I all give credit to the authors of the textbooks whose I referred to in the cause of writing this project and its subsequent design and construction. In this project, I shed light on the basic principle of operation, the design and construction procedure. 
Critical analysis of all the functional parts of the transformer and rectifier connected to it. It will therefore, be of great in serest and suitable to all electrical engineers and engineering students.  
 
TABLE OF CONTENT
Cover Page
Approval Page
Dedication 
Acknowledgement 
Abstract 
Table of Content 

CHAPTER ONE
1:0:0INTRODUCTION 
1:1:0 Objective
1:2:0Scope of Work  

CHAPTER TWO 
2:0:0LITERATURE REVIEW
2:1:0Description of Transformer 
2:2:0Classification of Transformer 
2:3:0Types of Transformer  
2:4:0Division of Transformer 
CHAPTER THREE   
3:0:0Purpose of the Device   
3:1:0Division of Transformer  
3:2:0Uses  
3:3:0Significance of Transformer (Device)   

CHAPTER FOUR 
4:0:0CONSTRUCTION OF TRANSFORMER  
4:1:0Cutting of Lamination 
4:2:0Construction of Former  
4:3:0The Winding
4:4:0Insulation
4:5:0Construction of Rectifier 
4:6:0Materials Used  

CHAPTER FIVE 
5:0:0PRINCIPLE OF OPERATION  
5:1:0Major Factor Considered 
5:2:0Rectifier Operations 
5:3:0Components Used 
5:4:0Connection of Transformer to Rectified
 
CHAPTER SIX
6:0:0Conclusion 
6:1:0Summary 
6:2:0Problem Encountered 
6:3:0Recommendations 
Bill of Quantity 

THE DESIGN AND CONSTRUCTION OF A 220 / 12 VOLTS SINGLE PHASE STEP-DOWN TRANSFORMER
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0418
  • Access Fee: ₦5,000 ($14)
  • Pages: 24 Pages
  • Format: Microsoft Word
  • Views: 177

500
Leave a comment...

    Related Works

    ABSTRACT This is a technical project write-up design and construction were carried out by me with deep intensive and extensive research work under the strict supervisor of Engr K.C Ugwu.  I all give credit to the authors of the textbooks whose I referred to in the cause of writing this project and its subsequent design and construction. In this... Continue Reading
    ABSTRACT This is a technical project write-up design and construction were carried out by me with deep intensive and extensive research work. I all give credit to the authors of the textbooks whose I referred to in the cause of writing this project and its subsequent design and construction. In this project, I shed light on the basic principle of... Continue Reading
    ABSTRACT  This is a technical project write-up design and construction were carried out by me with deep intensive and extensive research work.  I all give credit to the authors of the textbooks whose I referred to in the cause of writing this project and its subsequent design and construction. In this project, I shed light on the basic principle... Continue Reading
    ABSTRACT This project work-up deals on the design and construction of a single phase step down nations fermor, with raking IKVA, 240V/11OV, 80V 12U, 6V. It is a multi-circuit transformer that has one input as the primary and tappins to produce the output (secondary). It is considered as a single coil in series with the supply and a common coil to... Continue Reading
    ABSTRACT This project work-up deals on the design and construction of a single phase step down nations fermor, with raking IKVA, 240V/11OV, 80V 12U, 6V. It is a multi-circuit transformer that has one input as the primary and tappins to produce the output (secondary). It is considered as a single coil in series with the supply and a common coil to... Continue Reading
    ABSTRACT This project work-up deals on the design and construction of a single phase step down nations fermor, with raking IKVA, 240V/11OV, 80V 12U, 6V. It is a multi-circuit transformer that has one input as the primary and tappins to produce the... Continue Reading
    ABSTRACT This project work-up deals on the design and construction of a single phase step down nations fermor, with raking IKVA, 240V/11OV, 80V 12U, 6V. It is a multi-circuit transformer that has one input as the primary and tappins to produce the output (secondary). It is considered as a single coil in series with the supply and a common coil to... Continue Reading
    ABSTRACT Transformer is one of the indispensable devices mostly in Electric Power Transmission, Transformer Step-down or Step-up, the output voltage/current to the design requirement. This project was meant to show the necessary step and methods of designing and constructing a typical step-up auto transformer with tapping. In this project, we... Continue Reading
    ABSTRACT  This project write up of a step – down transformer from 220v to 24v:12v, this is to expose what a transformer is all about and its important and uses. The aim of the project, step-down transformer is to show Electrical and Electronics Engineering, could step-down the voltage from 220v to 24:12v, and fro this project write up.... Continue Reading
    ABSTRACT  This project write up of a step – down transformer from 220v to 24v:12v, this is to expose what a transformer is all about and its important and uses. The aim of the project, step-down transformer is to show Electrical and Electronics Engineering, could step-down the voltage from 220v to 24:12v, and fro this project write up.... Continue Reading
    Call Us Get this work