THE DESIGN AND CONSTRUCTION OF AN INVERTER

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0419
  • Access Fee: ₦5,000 ($14)
  • Pages: 34 Pages
  • Format: Microsoft Word
  • Views: 246
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
TABLE OF CONTENTS
Title Page
Certification Page
Acknowledgements
Dedication 
CHAPTER ONE:INTRODUCTION 
1.1Definition of Term 

CHAPTER TWO:TRANSFORMER FUNDAMENTALS
 
CHAPTER THREE:DESCRIPTION OF COMPONENTS 
3.1Resistors 
3.2Capacitors
3.2.1Types of Capacitor
3.3Semi-Conductor Diode 
3.4Transistors 
3.4.1Bipolar Transistor 
3.5Field Effect Transistor (FET)

CHAPTER FOUR:OPERATION AND DESIGN CONSIDERATION 
4.1Features of the Device
4.1.1Supply Unit 
4.1.2Inverter Unit 
4.1.3Stepup Transformer Unit 
4.1.4Triggering or Switching Unit 
4.2Design
4.2.1Required Specification
4.2.2Triggering or Switching Circuit
4.2.3Buffer Stage
4.2.4Transformer Turns Ratio 

CHAPTER FIVE:CONSTRUCTION PROCEDURE AND TESTING 
5.1Casing and Packaging 

CHAPTER SIX:ASSEMBLING OF SECTIONS 
6.1Testing of System Operation

CHAPTER SEVEN:INSTALLATION OF COMPLETED DESIGN

CHAPTER EIGHT: LIST, QUANTITY AND PRIZES OF COMPONENTS USED
8.1Conclusion 

THE DESIGN AND CONSTRUCTION OF AN INVERTER
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0419
  • Access Fee: ₦5,000 ($14)
  • Pages: 34 Pages
  • Format: Microsoft Word
  • Views: 246

500
Leave a comment...

    Related Works

    ABSTRACT An inverter is an electronic device that converts direct current (DC¬) to alternating current (AC) the converted Ac can be at any required voltage and frequency with the use of appropriate transformers, switching and control circuit. It’s simple put, is an electronic box that makes household... Continue Reading
    ABSTRACT An inverter is an electronic device that converts direct current (DC­) to alternating current (AC) the converted Ac can be at any required voltage and frequency with the use of appropriate transformers, switching and control circuit. It’s simple put, is an electronic box that makes household electricity for everyday items.  It... Continue Reading
    ABSTRACT This project is titled the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices and in homes in the absence of power supply from the national supply authority, NEPA. In order words the device / item serves as a substitute for NEPA which almost monopolises the power supply to... Continue Reading
    ABSTRACT This project presents the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices/homes in the absence of power supply from National Supply Authority.  It is designed in such a way that it will take up to 12V DC from battery and inverts it to an output of 220V, 50Hz AC. It... Continue Reading
    ABSTRACT This inverter is designed to convert ac power from higher capacity dc batteries to A.C voltage (power) for systems that use ac only. It uses 24v battery D.C times 2, which is converted by the MOSFET to A.C. it is used I.C. with the model number SG3525 where the four MOSFET is connected to it. It consists winding which enable to determine... Continue Reading
    ABSTRACT This project is titled the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices and in homes in the absence of power supply from the national supply authority, NEPA. In order words the device / item serves as a substitute for NEPA which almost monopolises the power supply to... Continue Reading
    ABSTRACT Power inverter is an electrical appliance that can be used with DC battery as an alternativesource of energy supply in the event of power failures and energy crisis. It is cheap, clean,very conducive and silent when in operation and a very reliable source of power supply as togenerator. Modern research and technologies have shown that... Continue Reading
    ABSTRACT This project review the conformability of uninterrupted power supply through the use of inverter. An inverter is a system that converts a direct current to an alternating current.  However, inverter is of different categories base on power rating such as 1KVA, 1.5KVA,2KVA, 5KVA etc. Moreover, since the invention of inverter, some... Continue Reading
    ABSTRACT This project is titled the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices and in homes in the absence of power supply from the national supply authority, NEPA. In order words the device / item serves as a substitute for NEPA which almost monopolises the power supply to... Continue Reading
    ABSTRACT Power inverter is an electrical appliance that can be used with DC battery as an alternativesource of energy supply in the event of power failures and energy crisis. It is cheap, clean,very conducive and silent when in operation and a very reliable source of power supply as togenerator. Modern research and technologies have shown that... Continue Reading
    Call Us Get this work