DESIGN AND CONSTRUCTION OF DIGITAL ELECTRONICS TRAINING SYSTEM

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0445
  • Access Fee: ₦5,000 ($14)
  • Pages: 50 Pages
  • Format: Microsoft Word
  • Views: 230
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

ABSTRACT

Digital electronics is now used in all fields of electronics from computers to digital phones and most industrial machines and motor vehicles. When prototyping digital electronic circuits, specific digital input signals are required to design the digital circuit. To accomplish this task, a teaching device known as a “Digital Trainer” is utilized. The


purpose of this project work is to provide a method for students to test digital circuits, with a simple and inexpensive digital trainer. This project work describes design, development and application of a digital trainer circuit prototyping system for students in their digital electronics course. The primary objective is to design an inexpensive, simple to use device that could be retained by students, so that they can undertake digital experimentation. The digital trainer board which contains power supply section, logic gate section, function generator section and encoder/decoder section.
It mainly concerns with logic gate section. Logic gate section is aimed to perform basic Boolean functions, such as AND, OR, NOT, NOR, NAND and so on. All logic gate circuits are firstly simulated in MULTISIM simulation environment and then constructed. After construction several tests have been performed and satisfactory results were obtained.

TABLE OF CONTENT

CHAPTER ONE

INTRODUCTION……………………………………………………………1

1.1       BACKGROUND OF STUDY………………………………………1

1.2       AIMS AND OBJECTIVES…………………………………………4

1.2.1    AIM……………………………………………………………………4

1.2.2    OBJECTIVES………………………………………………………  4

1.3       SCOPE OF THE PROJECT………………………………………  4

1.4       MOTIVATION OF THE PROJECT………………………………....5 

CHAPTER TWO

2.0       LITERATURE REVIEW………………………………………………6

2.1       DIGITAL ELECTRONICS CIRCUITS…………………………………… 10

2.1.1    PROPERTIES DIGITAL ELECTRONICS CIRCUITS……………… 10

2.1.2    CONSTRUCTION DIGITAL ELECTRONICS CIRCUITS………………. 13

CHAPTER THREE

3.0       DESIGN METHODOLOGY…………………………………………………… 14

3.1       MATERIALS AND METHOD…………………………………………………15

3.1.1    LEDS………………………………………………………………………………16

3.1.2    RESISTORS…………………………………………………………………….... 16

3.1.3    PIN CONNECTORS…………………………………………………………….. 16

3.1.4  PRINTED-CIRCUIT-BOARD (PCB)……………………………………......16

3.1.5    SEVEN SEGMENT DSPLAY……………………………………...…………… 17

3.1.6    TOGGLE SWITCHES…………………………………………………………… 17

3.1.7    DIGITAL MULTI-METER……………………………………………………… 17

3.2             POWER SUPPLY UNIT…………………………………………………………. 18

3.3     POWER RECTIFICATION COMPONENT……………………………. 18

3.3.1  TRANSFORMER……………………………………………………………18

3.3.2  CAPACITOR…………………………………………………………..……19

3.3.3     VOLTAGE REGULATOR………………………………………...…………….19

3.3.4    DIODES………………………………………………………………..…………... 19

3.4       METHOD USED FOR THE PROJECT………………………..……………….20

CHAPTER FOUR

4.0       CONSTRUCTION, TESTING AND RESULTS………………………………21

4.1       HARDWARE DESIGN…………………………………………………………. 21

4.1.1    AND GATE SECTION…………………………………………………………... 21

4.1.2    NAND Gate Section……………………………………………………………….21

4.1.3    OR Gate Section…………………………………………………………………... 22

4.1.4    NOR Gate Section…………………………………………………………...…….. 23

4.1.5    NOT Gate Section………………………………………………………………….  23

4.2       RESULTS OF SIMULATION FOR THE LOGIC GATE ICs………………… 24

4.3       TEST AND RESULTS OF DEVELOPED TRAINER BOARD……………… 28

4.3.1    2 INPUT OR GATE………………………………………………………………..28

4.3.2    NOT GATE 28

4.3.3    2 INPUT NAND GATE…………………………………………………………… 29

4.3.4    2 INPUT AND GATE 29

4.3.5    2 INPUT NOR GATE……………………………………………………………..30

4.3.6    2 INPUT XOR GATE……………………………………………………………..30

4.3.7    3 INPUT NAND GATE…………………………………………………………...31

4.3.8    3 INPUT NOR GATE……………………………………………………………..32

4.3.9    3 INPUT OR GATE……………………………………………………………….33

4.3.10  3 INPUT AND GATE……………………………………………………………..34

4.3.11  3 INPUT XOR GATE……………………………………………………………..35

4.4       Finished assembly of digital trainer circuit demonstration kit………………… 36

CHAPTER FIVE

5.0       CONCLUSION, SUMMARY AND RECOMMANDATION………………….. 36

5.1       SUMMARY………………………………………………………………………... 36

5.2       CONCLUSION……………………………………………………………………. 36

5.3       RECOMMANDATION…………………………………………………………... 36

REFERENCES…………………………………………………………………………….37

DESIGN AND CONSTRUCTION OF DIGITAL ELECTRONICS TRAINING SYSTEM
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0445
  • Access Fee: ₦5,000 ($14)
  • Pages: 50 Pages
  • Format: Microsoft Word
  • Views: 230

500
Leave a comment...

    Related Works

    Chapter one INTRODUCTION 1.1     Background of the study Electronic digital display system as used in this reports refers to a sign that uses electronic hardware and software to display its copy, messages or images. Also, a sign utilizing a fixed light source to provide a message  in text, images pictures, and / or symbols that may appear to... Continue Reading
    PREFACE The purpose of this text is to present at a primary and intermediate level a comprehensive over view of the construction principle and indeed the operation of a Digital Incubator.  We want to present a situation where by as the temperature in going up let the resistance be decreasing and as the temperature decreases let the resistance be... Continue Reading
    ABSTRACT In this work, we designed and constructed a digital counter circuit. The initial design criteria for the project were: to have a two digit output, to have the circuit count from 0-99, to include either a 555 timer or manual counter. Research was conducted into similar analogue electronic circuits and a suitable point of a digital die was... Continue Reading
    ABSTRACT Distance measurement plays a vital role in engineering, science and business. The distance is always measured between two points. Generally distance measurement is possible only by making contact with the target whose distance is to be measured, but this project discusses... Continue Reading
    ABSTRACT Distance measurement plays a vital role in engineering, science and business. The distance is always measured between two points. Generally distance measurement is possible only by making contact with the target whose distance is to be measured, but this project discusses the measurement of distance by digital measuring instrument. This... Continue Reading
    CONSTRUCTION OF A DIGITAL COMBINATION-AL LOCK SYSTEM ABSTRACT The increasing rate of crime, attacks by thieves, intruders and vandals, despite all forms of security gadgets and locks still need the attention of researchers to find a permanent solution to the well being of lives and properties of individual. To this end, we constructed a cheap and... Continue Reading
    ABSTRACT   Engineering being the mother every technology cannot be neglected. Without practical application in the field of engineering. The student and their tutors are impotent. The lucrative nature of engineering depends on the technical know-how of the engineer. The purpose of practical project to students is to help them acquire practical... Continue Reading
    ABSTRACT   Engineering being the mother every technology cannot be neglected. Without practical application in the field of engineering. The student and their tutors are impotent. The lucrative nature of engineering depends on the technical know-how of the engineer. The purpose of practical project to students is to help them acquire practical... Continue Reading
    ABSTRACT Libraries have been an important part of educational and information sector of any school.  The success of any library largely depends on proper management. Several libraries have suffered failure as a result of inadequate management and incapacitations in handling sensitive information as regards members of the library.   This... Continue Reading
    ABSTRACT Libraries have been an important part of educational and information sector of any school.  The success of any library largely depends on proper management. Several libraries have suffered failure as a result of inadequate management and incapacitations in handling sensitive information as regards members of the library.   This research... Continue Reading
    Call Us Get this work