DESIGN AND CONSTRUCTION OF A MICRO CONTROLLER BASED FAST FOOD MENU TABLE WITH DOT MATRIX DISPLAY BOARD.

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0448
  • Access Fee: ₦5,000 ($14)
  • Pages: 64 Pages
  • Format: Microsoft Word
  • Views: 212
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

 

ABSTRACT:

This project design is simply used to display the items demanded by each customer on the table. Each table has four buttons for Rice, beans, amala and akpu, and each of the buttons are connected to the processor. The customers on every table presses the button with the label of the item he or she needed. Then, a screen in the kitchen is used to display the table number and the items demanded.    The major components used in this design are 8951 microprocessor, crystal oscillator, Electronic switches, Light emitting diodes, Buffer (74244), 3-8 lines decoder (74138), electronic switches and

some other common and readily available components.





 

TABLE OF CONTENTS:

CHAPTER ONE1.1   INTRODUCTION1.2   MOTIVATION

1.3   PROBLEM    DEFINITION / METHODOLOGY

1.4   PROJECT

OUTLINE





 

CHAPTER TWO





2.1   COMPONENT DESCRIPTION

2.2   THE REGULATED POWER SUPPLY   

       2.2.1  STEP DOWN TRANSFORMER

       2.2.2  THE RECTIFIER CIRCUIT

       2.2.3  CAPACITOR      FILTER

       2.2.4  THE REGULATOR

2.3     THE CONTROLLING SECTION

    2.3.1  8951  MICRO CONTROLLER

    2.3.2  CRYSTAL OSCILLATOR


2.4     THE DISPLAY SECTION

       2.4.1  THE LEDS MATRIX

       2.4.2  THE 3-8 LINE DECODER (74138)

       2.4.3  THE BUFFER (74244)





2.5    THE SWITCHING SECTION.


CHAPTER THRE





3.1 DESIGN ANALYSIS





3.2 THE REGULATED POWER SUPPLY





3.2.1        RECTIFICATION





3.2.2         FILTERING





                                3.2.3           REGULATION



CHAPTER FOUR

4.1      DESIGN CALCULATION AND CHOICE OF COMPONENT

4.2      CALCULATION ON POWER SECTION 

           4.1.1    CALCULATION ON TRANSFORMER

           4.1.2   CALCULATION ON RECTIFICATION

           4.2.3   CALCULATION ON FILTERING




4.3.         CALCULATION ON THE CONTROL SECTION


CHAPTER FIVE

5.1     CONSTRUCTION, TESTING AND RESULTS

5.2     CONSTRUCTION 

5.3     TESTING

 

5.4    RESULTS ANY DISCUSSION

5.5    PROBLEMS ENCOUNTERED

5.6    PRECAUTIONS


 CHAPTER SIX

6.1       PACKAGING, CONCLUSION AND RECOMMENDATION

6.2        PACKAGING

6.3     CONCLUSION AND RECOMMENDATION

6.3        SUGGESTION FOR FURTHER WORK


APPENDIX  A 

THE CONTROL PROGRAMME 















 





 





 





 





 





 





 





 





 

DESIGN AND CONSTRUCTION OF A MICRO CONTROLLER BASED FAST FOOD MENU TABLE WITH DOT MATRIX DISPLAY BOARD.
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0448
  • Access Fee: ₦5,000 ($14)
  • Pages: 64 Pages
  • Format: Microsoft Word
  • Views: 212

500
Leave a comment...

    Related Works

      ABSTRACT: This project design is simply used to display the items demanded by each customer on the table. Each table has four buttons for Rice, beans, amala and akpu, and each of the buttons are connected to the processor. The customers on every table presses the button with the label of the item he or she needed. Then, a screen in the... Continue Reading
    INTRODUCTION The purpose of this project is to produce a narrative description of the design and construction of a microcontroller based dot matrix advert display. Firstly computer aided design is the modeling of physical system on Computers allowing both interactive and automatic analysis of design variant and the expression of design in a form... Continue Reading
    ABSTRACT  T-junction traffic light controller is such a device that will play a significant role in controlling traffic at junctions, to ease the expected increased rush at such junctions and reduce to minimum disorderliness that may arise, as well as allowing the pedestrians a right of the way at intervals rather than being struck down when in a... Continue Reading
    This project is based on the design and construction of a Wireless Electronic Notice  Board. It can be widely used to display latest information anywhere such as  institutions, shop, place of worship and other places. This Wireless Electronic Notice  Board will offer flexibility to user to control the information display within 50m to 200m ... Continue Reading
    This project is based on the design and construction of a Wireless Electronic Notice Board. It can be widely used to display latest information anywhere such as institutions, shop, place of worship and other places. This Wireless Electronic Notice Board will offer flexibility to user to control the information display within 50m to 200m range. S... Continue Reading
    TABLE OF CONTENTS CHAPTER ONE (1) INTRODUCTION 1.0 BACKGROUND 1.1 OBJECTIVE OF THE PROJECT DESIGN 1.2 SCOPE OF THE PROJECT 1.3 THE PIC MICROCONTROLLER 1.4 THE HARDWARE 1.4.1 The Circuit Components 1.4.2 Screen 1.5 POWERING THE PROJECT 1.6 PROJECT REPORT ORGANIZATION CHAPTER TWO LITERATURE REVIEW 2.0 INTRODUCTION 2.1 ORIGIN/HISTORY OF THE PROJECT... Continue Reading
      TABLE OF CONTENTS   CHAPTER ONE (1)  INTRODUCTION 1.0    BACKGROUND 1.1    OBJECTIVE OF THE PROJECT DESIGN 1.2    SCOPE OF THE PROJECT 1.3    THE PIC MICROCONTROLLER 1.4    THE HARDWARE 1.4.1    The Circuit Components 1.4.2    Screen 1.5    POWERING THE PROJECT 1.6    PROJECT REPORT ORGANIZATION CHAPTER TWO... Continue Reading
    ABSTRACT This project is about a microcontroller dot matrix system. This information display system is made in such a way that it can attract attention at any time of the day or night because they system flashes out each of the alphabet or words from left to the right end of the display... Continue Reading
    ABSTRACT The microcontroller based display board is an advert system that displays information based on a specific purpose. The system is designed to enable the viewer know the designers aim. The system comprises of different blocks of functional circuit that are put together to achieve the desired aim. These blocks include; the power supply... Continue Reading
    PREFACE This study, attempted to determine the impact of product display in a fast food and bakery industry with specially reference to (Chito Partner, Enugu). The purpose of this study is to find out how the techniques applied by Chitos have been able to help customer sort the products needed and how bent to improve the technologies and modernize... Continue Reading
    Call Us Get this work