CONSTRUCTION OF A MICROCONTROLLER BASED T-JUNCTION TRAFFIC LIGHT CONTROLLER

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0481
  • Access Fee: ₦5,000 ($14)
  • Pages: 65 Pages
  • Format: Microsoft Word
  • Views: 190
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

ABSTRACT
T-junction traffic light controller is such a device that will play a significant role in controlling traffic at junctions, to ease the expected increased rush at such junctions and reduce to minimum disorderliness that may arise, as well as allowing the pedestrians a right of the way at intervals rather than being struck down when in a hurry to cross the roads. Such an electrical system with a touch of electronics that control the flow of traffic in a pre-determined sequential pattern at a junction, has its diagram comprising of different components. The power supply unit provides the control unit with specified voltage from primary source. The pulse generator consisting of a timer generates pulse for the system. The clock or counter moderates the signal that enters the decoding logic system. The display unit of each stand consists of led, the first is red in colour, the second is amber in colour and the last is green in colour.


TABLE OF CONTENTS

Title Page - - - - - - - - - - - -i
Certification - - - - - - - - - - -ii
Dedication - - - - - - - - - - - -iii
Acknowledgement - - - - - - - - - -iv
Abstract - - - - - - - - - - - -v
Table of Contents - - - - - - - - - -vi
List of Figures - - - - - - - - - - -x

CHAPTER ONE
INTRODUCTION
1.1 Background of the Study - - - - - - - -1
1.2 Objective of the Project - - - - - - - - -3
1.3 Scope of the Study - - - - - - - - -3
1.4 Project Report Organization - - - - - - - -3

CHAPTER TWO
LITERATURE REVIEW
2.1 Introduction - - - - - - - - - -5
2.2 Pre-Emption And Priority - - - - - - - -8
2.3 Special Provisions - - - - - - - - -10
2.4 Technology- - - - - - - - - - -11
2.5 Control And Co-Ordination- - - - - - - -14
2.6 Design Layout And Operation Site- - - - - - -14

CHAPTER THREE
DESCRIPTION OF SYSTEMS
3.1 The Power Supply - - - - - - - - -15
3.2 The Voltage Regulator - - - - - - - - -16
3.3 Crystal Oscillator - - - - - - - - - -21
3.4 Paper Capacitor- - - - - - - - - -26
3.5 The Microcontroller- - - - - - - - -27
3.6 System Flow Diagram- - - - - - - - -33
3.7 Light Indicator Stage- - - - - - - - -35
3.8 Transistors- - - - - - - - - - -35
3.9 Resistors- - - - - - - - - - -41
3.10 Bridge Rectifier- - - - - - - - - -44
3.11 Electrolytic Capacitor- - - - - - - - -45
3.12 Step Down Transformer- - - - - - - -48
3.13 Seven Segment Display- - - - - - - - -49

CHAPTER FOUR
SYSTEMS OPERATIONAL UNITS
4.1 The Control Unit - - - - - - - - - -55
4.2 System Analysis - - - - - - - - -56
4.3 Choice Of Counter - - - - - - - - -56
4.4 The Interface Unit- - - - - - - - -57
4.5 Test And Result - - - - - - - - - -58
4.6 Observation - - - - - - - - - -58
4.7 Packaging- - - - - - - - - - -59
4.8 Bill Of Engineering Measurement And Evaluation - - - -60

CHAPTER FIVE CONCLUSION AND RECOMMENDATIONS
5.1 Conclusion -- - - - - - - - - -63
5.2 Recommendations- - - - - - - - -63
5.3 Suggestions For Further Research- - - - - - -64
References- - - - - - - - - - -65
CONSTRUCTION OF A MICROCONTROLLER BASED T-JUNCTION TRAFFIC LIGHT CONTROLLER
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0481
  • Access Fee: ₦5,000 ($14)
  • Pages: 65 Pages
  • Format: Microsoft Word
  • Views: 190

500
Leave a comment...

    Related Works

    ABSTRACT T-junction traffic light controller is such a device that will play a significant role in controlling traffic at junctions, to ease the expected increased rush at such junctions and reduce to minimum disorderliness that may arise, as well as allowing the pedestrians a right of the way at intervals rather than being struck down when in a... Continue Reading
    ABSTRACT T-junction traffic light controller is such a device that will play a significant role in controlling traffic at junctions, to ease the expected increased rush at such junctions and reduce to minimum disorderliness that may arise, as well as allowing the pedestrians a right of the way at intervals rather than being struck down when in a... Continue Reading
    ABSTRACT T-junction traffic light controller is such a device that will play a significant role in controlling traffic at junctions, to ease the expected increased rush at such junctions and reduce to minimum disorderliness that may arise, as well as allowing the pedestrians a right of the way at intervals rather than being struck down when in a... Continue Reading
    ABSTRACT  T-junction traffic light controller is such a device that will play a significant role in controlling traffic at junctions, to ease the expected increased rush at such junctions and reduce to minimum disorderliness that may arise, as well as allowing the pedestrians a right of the way at intervals rather than being struck down when in a... Continue Reading
    ABSTRACT:  A traffic light system is an electronic circuitry designed and configured to control the flow of the traffic (vehicular and human) at roads intersection without the physical presence of a traffic warden. This is made possible through the help of a signaling device which is mounted at roads intersection. It is achieved using... Continue Reading
    ABSTRACT  The control of traffic at road junction, which was done purely by human effort, proves to be inefficient owing to the increasing rate  of both  motorists as well as the  complexity  of  road networks. This inadequacy brought about the use of discrete solid-state electronics up to the usage of a computer controlled microprocessor,... Continue Reading
    ABSTRACT The control of traffic at road junction, which was done purely by human effort, proves to be inefficient owing to the increasing rate of both motorists as well as the complexity of road networks. This inadequacy brought about the use of discrete solid-state electronics up to the usage of a computer controlled microprocessor, but the... Continue Reading
    ABSTRACT The aim of this design work is to allow traffic light to rotate over a designated time interval between the two roads concerned i.e IMT and ESUT Junction. This design will control and monitor devices and cars within its environment i.e the junction. It will as well steer small vehicles showing them how to obey the traffic instructions... Continue Reading
    ABSTRACT The aim of this design work is to allow traffic light to rotate over a designated time interval between the two roads concerned i.e IMT and ESUT Junction. This design will control and monitor devices and cars within its environment i.e the junction.  It will as well steer small vehicles showing them how to obey the traffic instructions... Continue Reading
    ABSTRACT  The very fundamental reasons behind this project assignment is to expose student to the very important aspect of private and independent research work not only theories but also subsequent translation of the theoretical research work into a particular function system. The project construction of automatic fence light controller has been... Continue Reading
    Call Us Get this work