CONSTRUCTION OF MICROCONTROLLER DOT MATRIX DISPLAY SYSTEM

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0492
  • Access Fee: ₦5,000 ($14)
  • Pages: 11 Pages
  • Format: Microsoft Word
  • Views: 204
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

ABSTRACT
The microcontroller based display board is an advert system that displays information based on a specific purpose. The system is designed to enable the viewer know the designers aim.
The system comprises of different blocks of functional circuit that are put together to achieve the desired aim. These blocks include; the power supply section, the control section, the demultiplexer section and the display unit. The power supply unit is the section of the system that ensures that the system is turned ON and this section comprises of a 12- volt step-down transformer, a bridge rectifier circuit, a smoothening capacitor and a voltage regulator IC.
The control section is in charge of interpreting the changes that occur in the environment. The section controls the function of all other parts of the circuit. The function of the control unit is carried out using a micro-controller (AT89S52). It is programmed to carry out the desired function.
The demultiplexer section distributes signal to the display unit and allows them to light at appropriate time. This unit is achieved using a demultiplexer (74LS138). The display unit comprises of light emitting diode which are in dot matrix form. The light emitting diode is arranged in 64 columns and 14 rows.

TABLE OF CONTENTS

Title Page ................................................................................... i
Approval page ……………………………………………………. ii
Dedication ................................................................................. iii
Acknowledgement ...................................................................... iv
Abstract .................................................................................. v
Table of Content ....................................................................... vi
List of figures ……………………………………………………… x
List of tables ……………………………………………………….. xi

CHAPTER ONE
INTRODUCTION
1.0 Background ....................................................................... 1
1.1 Objective of the project ..................................................... 3
1.2 Scope of the project ……………………………………….. 4
1.3 Uses of the project ............................................................ 6
1.4 Project report organization ……………………………….. 7
1.4.1 Block diagram overview …………………………………… 8

CHAPTER TWO
2.0 Literature review ............................................................... 9

CHAPTER THREE
3.0 Description of the system components ........................... 13
3.1 The mains unit ………………………………………….. 13
3.2 The power supply unit ………………………………….. 13
3.2.1 Transformer ……………………………………………... 15
3.2.2 Rectifiers ………………………………………………… 15
3.2.3 Filters …………………………………………………….. 16
3.2.4 Regulators ………………………………………………. 16
3.3 The address generator unit ……………………………… 18
3.4 The memory/microcontroller unit ……………………….. 19
3.4.1 Description of the micro-controller ……………………. 19
3.5 The drivers unit …………………………………………… 20
3.5.1 Transistor ………………………………………………… 20
3.5.2 Light Emitting Diodes (LEDs) ………………………….. 21
3.5.3 Sizes, shapes and viewing angles of LEDs ………… 22
3.5.4 Diodes ……………………………………………………. 22
3.6 Implementation process ………………………………….. 23
3.7 Making the LED blink with the micro-controller ………. . 25
3.8 Implementation details ……………………………………. 27
3.8.1 Micro-controller pin descriptions ………………………. 28
3.8.2 System reset ……………………………………………. 34
3.8.3 Oscillator characteristics ……………………………….. 34
3.9 Software ………..………………………………………….. 35
3.9.1 Software development ………………………………….. 36
3.10 Development process …………………………………… 38
3.11 Program entry and editing ……………………………….. 39
3.12 Assembling and linking ………………………………….. 39
3.13 System control program steps …………………………... 40
3.14 Software for the programmers ………………………….. 41

CHAPTER FOUR
4.0 Implementation, construction step and packaging …….. 45
4.1 Programming the micro-controller (AT89S52) ………….. 45
4.1.1 Flash or EPROM programmer …………………………... 45
4.2 Using a personal computer to program the micro-controller… 47
4.3 System flow chart ……………………………………………. 49
4.4 Information gathering ……………………………………….. 51
4.5 Data analysis ………………………………………………….. 53
4.6 Implementation approach …………………………………. 56
4.7 Choices of implementation approach ……………………. 56
4.8 packaging ……………………………………………………. 57

CHAPTER FIVE
5.0 Test results, summary and conclusion …………………… 58
5.1 System testing and integration …………………………….. 58
5.2 Test plan and test data ……………………………………… 58
5.2.1 Component test …………………………………………… 59
5.2.2 System test ………………………………………………... 60
5.2.3 Transformer test ………………………………………….. 60
5.2.4 Other tests …………………………………………………. 61
5.3 Summary……………………………………………………….. 61
5.4 Summary of achievement …………………………………. 62
5.5 Conclusion ……………………………………………………. 62
BIBLIOGRAPHY …............................................................... 64
APPENDIX ……………………………………………………. 65
CONSTRUCTION OF MICROCONTROLLER DOT MATRIX DISPLAY SYSTEM
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0492
  • Access Fee: ₦5,000 ($14)
  • Pages: 11 Pages
  • Format: Microsoft Word
  • Views: 204

500
Leave a comment...

    Related Works

      TABLE OF CONTENTS   CHAPTER ONE (1)  INTRODUCTION 1.0    BACKGROUND 1.1    OBJECTIVE OF THE PROJECT DESIGN 1.2    SCOPE OF THE PROJECT 1.3    THE PIC MICROCONTROLLER 1.4    THE HARDWARE 1.4.1    The Circuit Components 1.4.2    Screen 1.5    POWERING THE PROJECT 1.6    PROJECT REPORT ORGANIZATION CHAPTER TWO... Continue Reading
    TABLE OF CONTENTS CHAPTER ONE (1) INTRODUCTION 1.0 BACKGROUND 1.1 OBJECTIVE OF THE PROJECT DESIGN 1.2 SCOPE OF THE PROJECT 1.3 THE PIC MICROCONTROLLER 1.4 THE HARDWARE 1.4.1 The Circuit Components 1.4.2 Screen 1.5 POWERING THE PROJECT 1.6 PROJECT REPORT ORGANIZATION CHAPTER TWO LITERATURE REVIEW 2.0 INTRODUCTION 2.1 ORIGIN/HISTORY OF THE PROJECT... Continue Reading
    Abstract               During the invention of security system alarms, in the early 80s technology of system shadow which involves lighten and sensing of objects was at that age found during their experiments using a special material know as light dependent resistor which its family lies in the resistance serials. The development of... Continue Reading
      ABSTRACT: This project design is simply used to display the items demanded by each customer on the table. Each table has four buttons for Rice, beans, amala and akpu, and each of the buttons are connected to the processor. The customers on every table presses the button with the label of the item he or she needed. Then, a screen in the... Continue Reading
    INTRODUCTION The purpose of this project is to produce a narrative description of the design and construction of a microcontroller based dot matrix advert display. Firstly computer aided design is the modeling of physical system on Computers allowing both interactive and automatic analysis of design variant and the expression of design in a form... Continue Reading
    Chapter one INTRODUCTION 1.1     Background of the study Electronic digital display system as used in this reports refers to a sign that uses electronic hardware and software to display its copy, messages or images. Also, a sign utilizing a fixed light source to provide a message  in text, images pictures, and / or symbols that may appear to... Continue Reading
    ABSTRACT This project report is a thesis written specifically to cover the design analysis construction, test and packaging of a multipurpose security system from electric component that can be easily be obtainable from the market. The report discusses the various unit and stages of the alarm system, thesis include:- a)     Clock generation... Continue Reading
    Abstract: This project is aimed to implement a  system that will automate the security system of a given area. It ensures that  the user is alerted each time an intruder encroaches a secured position in an  area of application through the sounding of alarm.(Siren) More so, information  about the intruder’s position will also be made noticed... Continue Reading
    ABSTRACT This project work deals on the Design and Construction of Intruder Detector Alarm System with Direction/Location Displaywhich is capable of detecting intrusion at any location, sound and alarm and display the exact location of the intruder using... Continue Reading
    CHAPTER ONE INTRODUCTION 1.1                             OBJECTIVE OF PROJECT The need for a remote control alert system that can control domestic appliances and various lighting points and sockets has often been a concern for users. At times users find it inconvenient and time consuming to go around turning their... Continue Reading
    Call Us Get this work