Numerical Simulation Of Turbulent Natural Convection And Heat Transfer In A Rectangular Enclosure Using The 𝒌 − 𝝎 Model

  • Type: Project
  • Department: Physics
  • Project ID: PHY0099
  • Access Fee: ₦5,000 ($14)
  • Pages: 75 Pages
  • Format: Microsoft Word
  • Views: 366
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

ABSTRACT

Turbulent flow is a type of fluid flow in which the fluid undergoes irregular fluctuations. The velocity of the fluid at a point is continuously undergoing changes in both magnitude and direction. Turbulent natural convection has been studied both numerically and theoretically. It plays an important role in the field of heat transfer and buildings environment. A numerical study was performed on a rectangular enclosure with varying Rayleigh numbers to determine velocity, temperature distributions and turbulent intensities of a two dimensional buoyancy driven turbulent flow. The vertical walls of the enclosure are kept at a constant temperature difference of 18𝐾 while horizontal walls are adiabatic. The RANS, energy and turbulent transport equations with Boussinesq approximations were discretized using Finite Difference method. The low Reynolds 𝑘 −omega (𝑘 − 𝜔) two equation model was used. The Rayleigh number range 1010 ≤ 𝑅𝑎 ≤ 1013 with constant Aspect ratio and Prandtl number 0.71 were used. The contours of total temperature distribution, velocity magnitude and turbulent intensity have been represented. Based on the numerical results as the Rayleigh number increases, the turbulent intensity increases.

Numerical Simulation Of Turbulent Natural Convection And Heat Transfer In A Rectangular Enclosure Using The 𝒌 − 𝝎 Model
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Physics
  • Project ID: PHY0099
  • Access Fee: ₦5,000 ($14)
  • Pages: 75 Pages
  • Format: Microsoft Word
  • Views: 366

500
Leave a comment...

    Related Works

    ABSTRACT Turbulent flow is a type of fluid flow in which the fluid undergoes irregular fluctuations. The velocity of the fluid at a point is continuously undergoing changes in both magnitude and direction. Turbulent natural convection has been studied both numerically and theoretically. It plays an important role in the field of heat transfer and... Continue Reading
    Studies have been done on the aspect ratio effect on natural convection turbulence using standard  k-ε model but further studies showed that k-ω SST model performed better than both k-ε and k-ω  model in the whole enclosure. Thus, there was need to do a numerical study on the natural  convection fluid flow in a rectangular enclosure full of... Continue Reading
    ABSTRACT Heat transfer plays a great role in engineering processes, blowing of fluids is used in designing thrusters and prevention of corrosion. Suction is used in film cooling and coating of wires in chemical engineering. A lot of research has based on thermal reduction in processing streams and forgetting the machine efficiency. The study... Continue Reading
    Abstract Industrial accidents are on the rise. This fact is even more prevalent in developing countries where the countries lack the safety standards required to ensure workplace safety in the pursuit of economic development. As land in prime locations becomes increasingly scarce, there is an argument for building skyscrapers. But this just... Continue Reading
    ABSTRACT In the present work, STAR-CCM+ CFD code was used to investigate steady state thermal hydraulic parameters in the core of Ghana Research Reactor-1 (GHARR-1). The core was segmented into 21 axial segments. 3D-CAD parametric solid modeler embedded in STARCCM+ was used to model the geometry. The geometry was discretized by the use of... Continue Reading
    ABSTRACT The boundary layer flow, heat and mass transfer in a quiescent nanofluid driven by a continuous stretching sheet is significant in numerous engineering and industrial processes. Nanofluids posses enhanced thermo physical properties which make them more superior than convectional fluids. This study investigates numerically heat and mass... Continue Reading
    This experiment was conducted in order to have a broader knowledge on hydraulic jump and its applications. It was performed in the hydraulic laboratory of the department of Water Resources and Environmental Engineering, Ahmadu Bello University, Zaria, using the TQH23, 2.52m flow rectangular channel and the HID hydraulic bench which provides water... Continue Reading
    This experiment was conducted in order to have a broader knowledge on hydraulic jump and its  applications. It was performed in the hydraulic laboratory of the department of Water Resources  and Environmental Engineering, Ahmadu Bello University, Zaria, using the TQH23, 2.52m flow  rectangular channel and the HID hydraulic bench which provides... Continue Reading
    ABSTRACT The precise content of this project was to construct a model shell and tube heat exchanger. The material for construction of this project (equipment) and their dimensions are as follows: 500mm length of a tube bundle 20mm diameter of the tube bundle 650mm length of the shell 120mm... Continue Reading
    ABSTRACT The precise content of this project was to construct a model shell and tube heat  exchanger.  The material for construction of this project (equipment) and their dimensions are as follows:  1.500mm length of a tube bundle  2.20mm diameter of the tube bundle  3.650mm length of the shell  4.120mm diameter of the shell  5.70mm length... Continue Reading
    Call Us Get this work