DESIGN AND CONSTRUCTION OF AN ELETRONIC DIGITAL DISPLAY SYSTEM (MOVING MESSAGE DISPLAY

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0062
  • Access Fee: ₦5,000 ($14)
  • Chapters: 5 Chapters
  • Pages: 65 Pages
  • Format: Microsoft Word
  • Views: 1.4K
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Chapter one

INTRODUCTION

1.1     Background of the study

Electronic digital display system as used in this reports refers to a sign that uses electronic hardware and software to display its copy, messages or images. Also, a sign utilizing a fixed light source to provide a message  in text, images pictures, and / or symbols that may appear to move or may appear as on/off messages. This is contrast to traditional non-electronic signs where the copy displayed is physically applied to the sign surface by printing, painting or otherwise attaching it onto the sign. The materials or substrate to which the copy is applied is typically paper, wood, plastic or the wall of a building.

          In this modern time, solid materials have helped man to show that he really exists by doing wonders in the world of electronics. One major development, made possible by the enormous advances in solid state technology, is the “digital revolution”. Circuits are designed to implement the basic digital logic functions fundamental to all digital systems. Digital electronics therefore comprises the design, manufacture and use of circuits for processing information in digital form (Simpson, 1978).

          An information display is a way of providing information and it is also used as an object for promotion. It can be seen in a form of cardboard or tarpaulin at stores / shops, sign posts, placards, notice boards and electronic display boards. But the advent of new technologies has made the information in the form of an electronic display in the world of advertisements and promotions (Gupta, Shukla and Nagwekar, 2013). The ability to display a short message can be useful application to be available for any business. Electronic digital display system is perfect for this application. It can be used for both indoor and outdoor which makes it universal fit for any business or event. Electronic digital display system is very efficient and cost effective way to spread messages to thousands of people, without any personal contact or door to door sales. Light-Emitting Diode (LED) is a solid state light source with several attractive properties for display application. LED is a diode that gives off visible light when forward biased (Mehta and Mehta, 2014). It is chosen as the main component for displaying messages because, today LED is the most energy efficiency example and other useful systems.

          The birth of signs and display can be said to be as old as the existence of man on the planet earth. From the beginning of the world, different types of displays have been in use, each mode to serve the purpose of invention efficiently. Signs are any kind of visual graphics created to display information to a particular audience (David, 2013). In 1389, King Richard II ofEnglandcompelled landlords to erect signs outside their premises (Manton, 2008). In ancientRome, signboards were usually made from stone or terracotta (Chris, 1995).

          With the advancement in technology, man started carving woods and trees. The use of special dyes on wood as a means of identifying special locations. With the discovery of Bronze and iron, man started using the materials to display sign, thus the advent of metal sign boards were born, which are mostly used in developing countries. On semiconductors and vacuum tubes technology, light displays and sign boards were built to add more beauty in the old system and as a way to increase visibility. LED technology is frequently used in signs now instead of Neon signs, introduced in 1910 at the Paris Motor show (Bellu, 2006). The use of electronic is now  becoming very important. It is extensively applied in almost our day to day activities.

          Electronic digital display system is also used for outdoor advertisement. Before, outdoor advertising was mainly characterized by the use of paper. Every bus stop and billboard had a paper advertisement inside. The reason for this was simple paper was easy to use and extremely cheap. It had some draw backs as  well. Before an image is actually on the street, it first has to be printed, pasted and placed. The journey from design to placement is quite long. Another disadvantages is the considerable amount waste generated by the use of paper. Finally, many people ignore a paper advertisement and there attention is drawn to the vibrant environment around them and not  to a still image.

          The extent of development in information dissemination has made it possible that the well known method of displaying information using sign posts, notice boards, etc has to be modified by using electronic digital display system. In today’s rapidly advancing technology market, most conventional digital display system are not being implemented using individual logic gates and integrated circuits (ICs) such have been used in the past instead, programmable devices such as microprocessor and microcontroller chips which contain the circuitry necessary to create logic functions are being used to implement digital systems. The use of 555 timer as a stable multivibrator and decade counter (CD4017) can be used to build less expensive electronic display system. The use of these two major ICs will bring about less board space, less power consumptions and overall, low cost in manufacturing.

          This project however; emphasizes mainly on the display of information using two major integrated circuits (ICs) namely NE555 timer (ICI) and CD4017 (IC2) to control the lighting of LEDs. This message display circuit is built around readily available, low cost components. It is easy to fabricate. A total of 250 LEDs will be used to display the message “GREAT NIGERIAN STUDENTS”

1.2     Statement of the Problem

          Due to limitation of the sign board or local sign board which could not display clearly at night expect light shines on it, it is then necessary that electronic display system is employed to counter the limits of the local sign board. The information displayed on the local sign board is less attractive compared to the information displayed using electronic digital display system.

          Thus, researchers are prompted to tirelessly hold up to these challenges by initiating some means of improving the above among which is the design and construction of an electronic digital display system.

1.3     Objectives of the Study

          The main objective of this study is to design and construct an electronic digital display system. Specifically this study will achieve the following:

i        To display “Great Nigerian students”

ii       To use the electronic digital display system constructed as a sign post for federal polytechnic, Oko.

iii      To have more knowledge on what electronic digital display system is all about.

v       To know the benefits of electronic digital display system.

v       To design and realize the moving message display panel.

1.4     Significance of the Study

In all field of human endeavour, electronic digital display system plays very vital role, such as means of advertisement, means of communication, presentations, exhibitions, identification and direction. It is also used in giving warning or safety instructions, such as warning signs, traffic signs, exit signs or signs conveying rules and regulations. This project write-up will be a guide to future designing in a related work.

1.5     Scope of the Study

This project covers the use of peripheral solid state electronic components alongside with two major integrated circuits (ICs) namely NESSS timer and CD4017 decade counter to solve above stated problems. It is limited to display GREAT NIGERIAN STUDENTS

1.6     Research Questions

This research will try to provide answers to the following research questions:

1)      What is electronic digital display system?

2)      How can electronic digital display system be constructed?

3)      What are the users of electronic digital display system?

4)      What are the benefits of electronic digital display system?

5)      What kind of content that can be shown on electronic digital display system?

DESIGN AND CONSTRUCTION OF AN ELETRONIC DIGITAL DISPLAY SYSTEM (MOVING MESSAGE DISPLAY
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0062
  • Access Fee: ₦5,000 ($14)
  • Chapters: 5 Chapters
  • Pages: 65 Pages
  • Format: Microsoft Word
  • Views: 1.4K

500
Leave a comment...

    Related Works

    Chapter one INTRODUCTION 1.1     Background of the study Electronic digital display system as used in this reports refers to a sign that uses electronic hardware and software to display its copy, messages or images. Also, a sign utilizing a fixed light source to provide a message  in text, images pictures, and / or symbols that may appear to... Continue Reading
    ABSTRACT Electronic Digital message display Board is an electronic gadget that is capable of displaying length of alphanumeric characters, symbols and any form of representation on a matrix of light emitting diodes (LED) scrolling the characters across the screen for information disemination. This project set out to solve the problem of inadequate... Continue Reading
    ABSTRACT Electronic Digital message display Board is an electronic gadget that is capable of displaying length of alphanumeric characters, symbols and any form of representation on a matrix of light emitting diodes (LED) scrolling the characters across the screen for information disemination. This project set out to solve the problem of inadequate... Continue Reading
    ABSTRACT This project report is a thesis written specifically to cover the design analysis construction, test and packaging of a multipurpose security system from electric component that can be easily be obtainable from the market. The report discusses the various unit and stages of the alarm system, thesis include:- a)     Clock generation... Continue Reading
    ABSTRACT This project work deals on the Design and Construction of Intruder Detector Alarm System with Direction/Location Displaywhich is capable of detecting intrusion at any location, sound and alarm and display the exact location of the intruder using... Continue Reading
    Abstract: This project is aimed to implement a  system that will automate the security system of a given area. It ensures that  the user is alerted each time an intruder encroaches a secured position in an  area of application through the sounding of alarm.(Siren) More so, information  about the intruder’s position will also be made noticed... Continue Reading
    Abstract               During the invention of security system alarms, in the early 80s technology of system shadow which involves lighten and sensing of objects was at that age found during their experiments using a special material know as light dependent resistor which its family lies in the resistance serials. The development of... Continue Reading
    This project is based on the design and construction of a Wireless Electronic Notice  Board. It can be widely used to display latest information anywhere such as  institutions, shop, place of worship and other places. This Wireless Electronic Notice  Board will offer flexibility to user to control the information display within 50m to 200m ... Continue Reading
    This project is based on the design and construction of a Wireless Electronic Notice Board. It can be widely used to display latest information anywhere such as institutions, shop, place of worship and other places. This Wireless Electronic Notice Board will offer flexibility to user to control the information display within 50m to 200m range. S... Continue Reading
    ABSTRACT This project is about a microcontroller dot matrix system. This information display system is made in such a way that it can attract attention at any time of the day or night because they system flashes out each of the alphabet or words from left to the right end of the display... Continue Reading
    Call Us Get this work