TRANSFORMER REWINDING MACHINE WITH DIGITAL

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0067
  • Access Fee: ₦5,000 ($14)
  • Chapters: 5 Chapters
  • Pages: 65 Pages
  • Format: Microsoft Word
  • Views: 1.2K
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

ABSTRACT

This project is on design and construction of transformer rewinding machine with digital counter. A coil winding machine is a machine for winding coil onto a spool, bobbin and many more. This coil winding machine is one of types of winding machine that available in industries today. From multi speeded machines to medium, large and extra-large machines, these machines come in various types and categories, performing a range function. The common applications for a coil winding machine are to wind coils for transformer, inductors, motor and chokes. To complete a coil using manual coil winding machine will be inconvenience and waste of time. Therefore, fabrication of coil winding machine will be done in this project which is controlled by one stepper motor using software program.

CHAPTER ONE

INTRODUCTION

1.1 Background of the Project

Typically, a winding machine winds a material such as metal wire, thread, or paper, onto a core, spool, or bobbin. There are several different types of winding machines, from simple manual feed machines to complex computer-numeric-control (CNC) machines. Some of the more common uses for winding machines are coil winding, rope winding, and continuous filament winding. Many industries use these devices, including textile, electronics, and wire industries (Pansini, 2009).

A manual winding machine usually has a core on a spindle and the user feeds wire, rope, or other material onto the core. The user controls the spindle speed and feeds the material through user hand, guiding it to control the tension and load pattern. These simple machines may be of a bench-top size or large stand-alone winder.  Winding machines may be used for transformer or motor (Henry, 2011).

Transformer rewinding machine is a machine for rewinding coil in a transformer. This transformer rewinding machine is one of types of winding machine that is available in industries today. The transformer rewinding machine can be classified according to speed levels and capacity. From multi speeded machines to medium, large and extra-large machines, these machines come in various types and categories, performing a range function and can be manual, automatic, analogue or digital (Peri, 2010).

Transformer rewinding machine with digital display design is dictated by a coil’s complexity, material tension limitations, machine versatilities, and automation/operator intervention, production volume and budgetary considerations (Bill, 2013).

1.2 Problem Statement

The problem to be solved in this project will include;

1. The design an automatic transformer rewinding machine

2. Integrating a digital counter into the transformer rewinding machine

3. Sourcing of local components for construction of automatic transformer rewinding machine

4. Production of a user friendly and easy to operate automatic transformer rewinding machine

1.3 Objectives of the project

The aim of this project is to design and construct a transformer rewinding machine with digital counter.

Basically, this project has four main objectives;

1. To design an automatic transformer rewinding machine

2. To integrate a digital counter into the transformer rewinding machine

3. To source local components for construction of automatic transformer rewinding machine

4. To produced a user friendly and easy to operate automatic transformer rewinding machine

1.4 Scope and Limitation 

The design of the machine will be limited to a table size winding machine. This study limited its scope for winding coils of small transformers of about 12KV with an input voltage of 220v-5v dc and an output voltage of 5v,the number of turns the machine can wind is in the range of 0-999 turns . The size of the copper wire for winding other machines like large turbine, heavy transformers e.t.c that has 14 to 34 SWG or specifically 0.078-0.3125 diameter copper wire is beyond the machine capability. Specifically indoor appliances commonly found in household like electric fan, grinder.

1.5 Importance of the Project

The significance of this project cannot be overemphasized this is because it would serve as a low cost machine when produced in bulk. And this will aid the small business man who cannot afford to buy the bigger machine by affording this one. Also it can be used for training students in winding of small transformers & relay coils.

TRANSFORMER REWINDING MACHINE WITH DIGITAL
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0067
  • Access Fee: ₦5,000 ($14)
  • Chapters: 5 Chapters
  • Pages: 65 Pages
  • Format: Microsoft Word
  • Views: 1.2K

500
Leave a comment...

    Related Works

    ABSTRACT  This project write up of a step – down transformer from 220v to 24v:12v, this is to expose what a transformer is all about and its important and uses. The aim of the project, step-down transformer is to show Electrical and Electronics Engineering, could step-down the voltage from 220v to 24:12v, and fro this project write up.... Continue Reading
    ABSTRACT Transformer is one of the indispensable devices mostly in Electric Power Transmission, Transformer Step-down or Step-up, the output voltage/current to the design requirement. This project was meant to show the necessary step and methods of designing and constructing a typical step-up auto transformer with tapping. In this project, we... Continue Reading
    ABSTRACT A power  transformer is a very  simple device. It  is a vital  link in the  electronic  distribution  system. A power transformer is associated with faults.  The design and construction of the phase fault detector is to provide simple, reliable and comprehensive electrical phase fault detections and response system. The system ... Continue Reading
    ABSTRACT  This project write up of a step – down transformer from 220v to 24v:12v, this is to expose what a transformer is all about and its important and uses. The aim of the project, step-down transformer is to show Electrical and Electronics Engineering, could step-down the voltage from 220v to 24:12v, and fro this project write up.... Continue Reading
    ABSTRACT A Linear  Variable Differential Transformer (LVDT) was constructed having a primary winding of 245 turns and two secondary windings of 100 turns each. The device was calibrated with a graduated cylindrical rod. The graduated rod when inserted between the hollow tube which has the windings gave output voltages of ±0.046V, ±0.51V,... Continue Reading
    ABSTRACT This is a technical project write-up design and construction were carried out by me with deep intensive and extensive research work. I all give credit to the authors of the textbooks whose I referred to in the cause of writing this project and its subsequent design and construction. In this project, I shed light on the basic principle of... Continue Reading
    ABSTRACT Condition monitoring of Electrical power equipment has attracted considerable attention for years. The aim of this work is to use Fuzzy logic (FL) Tool Box in building a simulation system that will diagnose all kinds of incipient faults, phase to phase fault and overloading in a transformer and monitor its conditions. Current and rate of... Continue Reading
    ABSTRACT A Linear  Variable Differential Transformer (LVDT) was constructed having a primary winding of 245 turns and two secondary windings of 100 turns each. The device was calibrated with a graduated cylindrical rod. The graduated rod when inserted between the hollow tube which has the windings gave output voltages of ±0.046V, ±0.51V,... Continue Reading
    ABSTRACT This is a technical project write-up design and construction were carried out by me with deep intensive and extensive research work under the strict supervisor of Engr K.C Ugwu.  I all give credit to the authors of the textbooks whose I referred to in the cause of writing this project and its subsequent design and construction. In this... Continue Reading
    ABSTRACT  This is a technical project write-up design and construction were carried out by me with deep intensive and extensive research work.  I all give credit to the authors of the textbooks whose I referred to in the cause of writing this project and its subsequent design and construction. In this project, I shed light on the basic principle... Continue Reading
    Call Us Get this work