Mechanical Engineering Project Topics with Materials:

ABSTRACT The rate at which energy is lost by human activities is enormous. There is need to work on how to generate more energy and minimize the usage of the generated energy. In an internal combustion engine, there is need to focus on gaining energy usage by using generated heat during combustion process. To reduce the energy usage, emission rate... Continue Reading
  • Type:Project
  • ID:MCE0245
  • Pages:38
  • Reference:YES
see deeper... Continue Reading
  • Type:Project
  • ID:MCE0244
  • Pages:12
  • Reference:YES
see deeper... Continue Reading
  • Type:Project
  • ID:MCE0243
  • Pages:12
  • Reference:YES
ABSTRACT Description of a system and peripherals or devices in a computer system in which the operating of such devices is under control of the central processing unit is termed on-line. Because of the efficiency and fast services, this project is equally aimed at creating a computer based lottery which allows entire to be sold over the phone,... Continue Reading
  • Type:Project
  • ID:MCE0242
  • Pages:46
  • Reference:YES
ABSTRACT This project work deals with the design and fabrication of a suitable journal bearing test apparatus which can help in visualizing the behavior of journal bearing and its characteristics, and in determining the bearing parameters such as load bearing capacity, maximum oil film temperature, viscosity of lubricant, oil film pressure, and... Continue Reading
  • Type:Project
  • ID:MCE0241
  • Pages:88
  • Reference:YES
Due to the need for recycling Polyethylene terephthalate (PET or PETE) materials, especially bottles because of its various uses and applications, it was necessary that a locally made machine for crushing and shredding the PET materials was fabricated. The crushing process is necessary so as to aid the transportation and workability of the... Continue Reading
  • Type:Project
  • ID:MCE0240
  • Pages:5
  • Reference:YES
ABSTRACT This project work deals with the design and fabrication of a suitable journal bearing test apparatus which can help in visualizing the behavior of journal bearing and its characteristics, and in determining the bearing parameters such as load bearing capacity, maximum oil film temperature, viscosity of lubricant, oil film pressure, and... Continue Reading
  • Type:Project
  • ID:MCE0239
  • Pages:88
  • Reference:YES
Due to the need for recycling Polyethylene terephthalate (PET or PETE) materials, especially bottles because of its various uses and applications, it was necessary that a locally made machine for crushing and shredding the PET materials was fabricated. The crushing process is necessary so as to aid the transportation and workability of the... Continue Reading
  • Type:Project
  • ID:MCE0238
  • Pages:5
  • Reference:YES
A lawnmower is a machine that uses a revolving blade or blades to cut a lawn grass. Many designs have been made, each suited to a particular purpose. Manual grass cutter has environmental issues regarding pollution's and also require the need of man power to operate and has a great maintenance to its engine. This robot is design to be environment... Continue Reading
  • Type:Project
  • ID:MCE0237
  • Pages:67
  • Reference:YES
This project seek to modify the existing cassava grating machine to make it to be self-feeding in operation, to make the operation of the machine easier, safer The existing processing techniques used in the production of cassava starch and cassava dough leaves much to be desired. There are difficulties in the grating of the cassava dough, since... Continue Reading
  • Type:Project
  • ID:MCE0236
  • Pages:63
  • Reference:YES
A lawnmower is a machine that uses a revolving blade or blades to cut a lawn grass. Many designs have been made, each suited to a particular purpose. Manual grass cutter has environmental issues regarding pollution's and also require the need of man power to operate and has a great maintenance to its engine. This robot is design to be environment... Continue Reading
  • Type:Project
  • ID:MCE0235
  • Pages:67
  • Reference:YES
This project seek to modify the existing cassava grating machine to make it to be self-feeding in operation, to make the operation of the machine easier, safer The existing processing techniques used in the production of cassava starch and cassava dough leaves much to be desired. There are difficulties in the grating of the cassava dough, since... Continue Reading
  • Type:Project
  • ID:MCE0234
  • Pages:63
  • Chapters:5
  • Methodology:nil
  • Reference:YES
The continuous search for sustainable alternative energy to non renewable energy to mitigate  environmental pollution has made waste heat recovery from industries process, material and  energy streams frontier. Power plant technologies like steam and Organic Rankine cycle are  been research by researchers to improve waste heat recovery... Continue Reading
  • Type:Project
  • ID:MCE0233
  • Pages:58
  • Reference:YES
The major components of a gas turbine are compressor, combustors, turbine and generator. It operates by continuous drawing in fresh air into the compressor. The Air is then compressed to a high pressure in the compressor and discharge into the combustion. Here the air is missed with gas and burns continuous once ignited to increase its energy... Continue Reading
  • Type:Project
  • ID:MCE0232
  • Pages:33
  • Reference:YES
ABSTRACT This project illustrates the use of an exergetic approach to analyze the performance of a vapor compression refrigeration system using a refrigerant solution of a nanoparticle (TiO2), mineral oil, and R410a (base refrigerant). Exergy investigation is a thermodynamics strategy which allows for the assessment and improvement of a... Continue Reading
  • Type:Project
  • ID:MCE0231
  • Pages:83
  • Reference:YES
This project covers the design and construction of a power generating windmill. The designs was carried out based on long-term available wind data of bida at 10m above the ground level. The average wind speed for Bida is 5.24m/s and rated turbine wind speed is 6.29m/s. The design of each components of the system were carefully constructed in a... Continue Reading
  • Type:Project
  • ID:MCE0230
  • Pages:67
  • Reference:YES
The focus of this project was the development of an ICU/Rehabilitation adjustable bed for the hospital and home environment. The project was initiated with the desire to develop an innovative, effective and inexpensive mechanism that would require an electrical supply. The design was performed systematically using various methods, procedures,... Continue Reading
  • Type:Project
  • ID:MCE0229
  • Pages:57
  • Reference:YES
CHAPTER ONE: INTRODUCTION 1 Background of the Study 1 Statement of the Problem 6 Objectives of the Study 7 Justification for the Study 8 Scope and Limitations of the Work 9 Scope 9 Limitations 9 CHAPTER TWO: LITERATURE REVIEW 10 2.1 Small Hydropower Systems 10 2.1.1 Types of Hydroelectricity Generation 13 2.1.1.1 Conventional Hydroelectricity 13... Continue Reading
  • Type:Project
  • ID:MCE0228
  • Pages:105
  • Reference:YES
ABSTRACT The study explored the prospects and challenges in the informal auto-mechanic sector focusing on auto-mechanics enterprises within the Kumasi Metropolis. Specifically, the study sought to examine the prospects of the auto-mechanic enterprises, examine the challenges facing auto-mechanic enterprises, and the preparedness of auto-mechanics... Continue Reading
  • Type:Project
  • ID:MCE0227
  • Pages:85
  • Reference:YES
ABSTRACT This project centers on addressing the issue of the lack of research and development in Nigeria, in this case, looking into the firefighting and emergency sector. In this industry, the safety of the firefighters is of paramount importance as it is only then that they can fully carry out their duties and tasks. Of all the products that... Continue Reading
  • Type:Project
  • ID:MCE0226
  • Pages:69
  • Reference:YES
Focuses on the maximum volume of waste generated in a particular month in a particular area and uses a heuristic model for it's analysis. Research Problem A proper, efficient, reliable and hygienic waste handling and disposal technique tells more of our maintenance culture but the capacity and ability to efficiently manage the waste becomes... Continue Reading
  • Type:Project
  • ID:MCE0225
  • Pages:124
  • Reference:YES
INTRODUCTION Power amplifier is an electronic device, which is used to increase sound energy. In other words, the final stage which must driven a given load e.g mechanical indicator, a loudspeaker cathode roy tade, magnetic deflection coil, a transmitting accrual of a communication network. Power amplifier is also used in regulation power... Continue Reading
  • Type:Project
  • ID:MCE0224
  • Pages:34
  • Reference:YES
ABSTRACT This work was centered on the Design and implementation of a simple scientific calculator for education organization. The study traced calculator system as a tool to completely change mathematical knowledge and sophisticated problems solving strategies had advanced the field of simulated engine in mathematic. This project work also... Continue Reading
  • Type:Project
  • ID:MCE0223
  • Pages:47
  • Reference:YES
ABSTRACT In this project (3) alternative design solutions were considered for the locally made electric run. The authors utilize the available local raw demerits of each alternative with respect to the considered group were discussed and the solutions of the alternative that best satisfied the limitations was selected for production. Material... Continue Reading
  • Type:Project
  • ID:MCE0222
  • Pages:42
  • Reference:YES
ABSTRACT In all types of air –conditioning work a through knowledge of basic principal is varying important. The report of the project “re pair and rehabilitation of a faulty Air–conditioner” serves as guide to project implementation. It explains and illustrates the import principle of operation and various maintenance procedures in an... Continue Reading
  • Type:Project
  • ID:MCE0221
  • Pages:37
  • Reference:YES