+234 813 0686 500
+234 809 3423 853
info@grossarchive.com

Chemical Engineering Project Topics with Materials:

ABSTRACT A vegetable oil is a triglyceride extracted from a plant. Such oils have been part of human culture for millennia. The term \'vegetable oil\' can be narrowly defined as referring only to substances that are liquid at room temperature, or broadly defined without regard to a substance\'s state of matter at a given temperature. For this... Continue Reading
  • Type:Project
  • ID:CNG0353
  • Pages:56
  • Chapters:5
  • Methodology:nil
  • Reference:YES
ABSTRACT This project “Extraction of oil from a local seed (groundnut oil) and Characterization” was carried out using ten cups of groundnut seeds that was purchased from a local market in Enugu metropolis.  The oil these seeds were in Enugu using solvent extraction method.  Two different solvents were used in the extraction namely:... Continue Reading
  • Type:Project
  • ID:CNG0352
  • Pages:76
  • Chapters:5
  • Methodology:nil
  • Reference:YES
ABSTRACT  This project is an equipment which been fabricated for the principle purpose of producing heat energy for commercial use by burning solid fuel like briquette.  The project which is the fabrication of briquette stove was made from preferentially selected engineering materials like mild steels of different gauge member and metallic rod.... Continue Reading
  • Type:Project
  • ID:CNG0351
  • Pages:60
  • Chapters:5
  • Methodology:Scientific
  • Reference:YES
ABSTRACT The construction of the five (5) litre Electric Kettle was carried out in mechanical workshop of the Institute of Management and Technology Enugu. (I.M.T). The fabrication process, included measuring and marking out operations of which the following dimensions was taken; the cylindrical body was taken as 170mm by 700mm in height and... Continue Reading
  • Type:Project
  • ID:CNG0350
  • Pages:55
  • Chapters:5
  • Methodology:Scientific
  • Reference:YES
ABSTRACT This research work was arrived as the formulation and production of ethanol (ethyl alcohol) from the fermentation of palm wine. A fresh palm wine was ated which was obtained  from Emene in Enugu State.  The characteristics that was tested before and after fermentation were; specific gravity, refractive index and PH value of the... Continue Reading
  • Type:Project
  • ID:CNG0349
  • Pages:52
  • Chapters:5
  • Methodology:Scientific
  • Reference:YES
ABSTRACT This project work is on the bleaching of palm oil using activated charcoal. The charcoal used for this work was made from pieces of animal bone by carbonization method.  It was then activated into two different samples.  Firstly, the basic sample was activated using anaphoric acid (H2 s04) while the other was activated by just heating... Continue Reading
  • Type:Project
  • ID:CNG0348
  • Pages:81
  • Chapters:5
  • Methodology:Simple Percentage
  • Reference:YES
ABSTRACT The research titled extraction and characterization of watermelon seed oil was carried to investigate the effect that different drying methods, solvents and seed size would have on the quality and quantity of oil from watermelon ( Citrilus lanatus ) seeds. The watermelon seeds were removed from the pod and washed. The sample was weighed... Continue Reading
  • Type:Project
  • ID:CNG0347
  • Pages:79
  • Chapters:5
  • Methodology:Scientific
  • Reference:YES
ABSTRACT Water Purification Unit or filtration unit is designed in way that it will give a nice result. Like in our filtration, we have sand and carbon filter that were responded to separate the suspended solid particles, odour  and taste of the water, which will give a very nice filtered water at the end of the filtration. This unit has no... Continue Reading
  • Type:Project
  • ID:CNG0346
  • Pages:53
  • Chapters:5
  • Methodology:Scientific
  • Reference:YES
This project study was aimed at designing, fabricating, and evaluating the performance of a double effect evaporator, which was used to evaporate sugar syrup to be used for students’ demonstration. During the course of the study, the methods that were used comprised of the material balances, energy balances, and determination of the component... Continue Reading
  • Type:Project
  • ID:CNG0345
  • Pages:94
  • Chapters:5
  • Methodology:Scientific
  • Reference:YES
ABSTRACT A comparative investigation was undertaken to determine the head loss coefficients for horizontally mounted and vertically mounted orifices using a Fluid mechanics and Heat transfer trainer developed in Nigeria. Experiments were carried out observing the procedure and the discharge of the flow of water was collected to obtain the... Continue Reading
  • Type:Project
  • ID:CNG0344
  • Pages:135
  • Chapters:5
  • Methodology:Scientific
  • Reference:YES
ABSTRACT   This study was carried out principally for the formulation of artist paint using available raw materials. Paint simplified is a material which may be applied to surfaces in relatively thin layers and which changes to a solid and may occur by evaporation of solvents, by chemical reaction or by combination of the two. Artist paint is the... Continue Reading
  • Type:Project
  • ID:CNG0343
  • Pages:61
  • Chapters:5
  • Methodology:Scientific
  • Reference:YES
Abstract The 15 th of October has been decreed a day to focus on germs specifically. It’s the germs on our hand that are in the firing line .The world health organization estimates that 3.5 million children die from diarrhea and lower respiratory tract infections each year. That’s why global hand washing day was decreed. Sanitation of hand has... Continue Reading
  • Type:Project
  • ID:CNG0342
  • Pages:20
  • Chapters:5
  • Methodology:Scientific
  • Reference:YES
ABSTRACT The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials used for the production was of local source. The major raw materials used for the production of the emulsion paint: water, titanium iv oxide, calcium carbonate, kaoline, calgon, natrosol, biocide P.V.A, ammonia,... Continue Reading
  • Type:Project
  • ID:CNG0341
  • Pages:91
  • Chapters:6
  • Methodology:Scientific
  • Reference:YES
CHAPTER ONE INTRODUCTION Background of the Study Water is a limited natural resource and fundamental for life and  health  (UNWWDR,  2002). About 97.5% of all water on earth is salt water and the remaining 2.5% is fresh water. Around 70% of fresh water is frozen in... Continue Reading
  • Type:Project
  • ID:CNG0340
  • Pages:67
  • Chapters:5
  • Methodology:ANOVA
  • Reference:YES
ABSTRACT The two most common condenser tube problems faced by industrial users are internal tube fouling and tube failure. Fouling can have a major impact on the generating efficiency or the capacity of the condenser while the tube leaks or failure can seriously impact unit availability and reliability. Fundamental understanding of the root... Continue Reading
  • Type:Project
  • ID:CNG0338
  • Pages:31
  • Reference:YES
ABSTRACT An equipment design project was carried out to design an inverter (Bioreator) or the production of 100,00 metric tones per year of ethanol from sugar cane. An inverter is a part of process equipment used in ethanol production from sugar cane. While the rest process equipment include crusher, filter, centrifuge, fermented, distribution... Continue Reading
  • Type:Project
  • ID:CNG0337
  • Pages:61
  • Reference:YES
ABSTRACT As a result of modern development in Science and Technology, most of the large scale industrial used machine were now modernized to simple small and efficient machines. Some of these machines were either operated manually or the aid of electricity. For this reason, big metal sharpening machine was here reduced to simple term, which can be... Continue Reading
  • Type:Project
  • ID:CNG0336
  • Pages:46
  • Reference:YES
ABSTRACT The project dealt on the production of yam flour from yam chips. The yams were peeled and washed, 100grams samples coded sample A to G were subjected to two different drying conditions. Some were dried using the sun drying method while the others were dried through oven drying method kept at constant temperature of 500C, sodium... Continue Reading
  • Type:Project
  • ID:CNG0335
  • Pages:57
  • Reference:YES
ABSTRACT The effect of concentration of hydrochloric acid on hydrolysis of cellulose (saw-dust) to glucose was studied on this research project and the steps obtained to achieve this project involved treatment of saw-dust (cellulose) with different concentrations of the acid at constant temperature of 80° (350k) for 30mins. This was followed by... Continue Reading
  • Type:Project
  • ID:CNG0334
  • Pages:66
  • Reference:YES
ABSTRACT The need for effective and efficient means of oil extraction has been a concern in recent time. Hence, this study aimed at the oil extraction from Moringa oleifera seeds using the Microwave-Assisted extraction method. The extraction process was modeled using Response Surface Methodology (RSM). Also, the evaluation of Moringa oleifera oil... Continue Reading
  • Type:Project
  • ID:CNG0332
  • Pages:57
  • Reference:YES
The Crude Oil Quality Group (COQG) is sponsoring this document as an informational tool to be used by personnel in the petroleum industry. This document is intended to provide basic information on the effects that certain crude oil contaminants have on refinery operations. COQG’s goal is for this document to provide beneficial material to all... Continue Reading
  • Type:Project
  • ID:CNG0331
  • Pages:10
  • Reference:YES
The Crude Oil Quality Group (COQG) is sponsoring this document as an informational tool to be used by personnel in the petroleum industry. This document is intended to provide basic information on the effects that certain crude oil contaminants have on refinery operations. COQG’s goal is for this document to provide beneficial material to all... Continue Reading
  • Type:Project
  • ID:CNG0330
  • Pages:10
  • Reference:YES
ABSTRACT The objective of the repair and refurbishing the pilot plant temperature control equipment is to keep the apparatus in good working condition for it to be used for its various purposes. The part of the temperature control changed and new one installed. This was due to series of faults developed by the former one” Electrical accessories... Continue Reading
  • Type:Project
  • ID:CNG0329
  • Pages:20
  • Reference:YES
ABSTRACT The 20000 liters storage tank was constructed for effective storage and conservation of third with three (3) mild steel sheet of 14 gauge (2mm) thickness. The construction started by marketing out 1½ (One and half) mild steel of 2440 Mm by 113Mmusing metal meter rule and critter the already market out dimension underwent cutting with a... Continue Reading
  • Type:Project
  • ID:CNG0327
  • Pages:23
  • Reference:YES
ABSTRACT The 20000 liters storage tank was constructed for effective storage and conservation of third with three (3) mild steel sheet of 14 gauge (2mm) thickness. The construction started by marketing out 1½ (One and half) mild steel of 2440 Mm by 113Mmusing metal meter rule and critter the already market out dimension underwent cutting with a... Continue Reading
  • Type:Project
  • ID:CNG0326
  • Pages:23
  • Reference:YES