Design and Construction of a Power Inverter

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0342
  • Access Fee: ₦5,000 ($14)
  • Pages: 36 Pages
  • Format: Microsoft Word
  • Views: 257
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853
ABSTRACT
Power inverter is an electrical appliance that can be used with DC battery as an alternativesource of energy supply in the event of power failures and energy crisis. It is cheap, clean,very conducive and silent when in operation and a very reliable source of power supply as togenerator. Modern research and technologies have shown that inverter is one of the cheapestforms of energy generation. Throughout the world, it is readily available and can be partnerto solar energy particularly using  photo-voltaic cells (PVC) or  solar panel arrays, with abattery   bank   as   a   reservoir   to   collect   and   store   solar   energy   in   large   scale   powergeneration/production for rural and very remote areas’ electrification project in the Nation.Sine   wave,   modified   sine   wave,   square   wave,   cotek   and   power   master   fromhttp://www.inverter.htmlMost domestic appliances such as personal computers, television sets and lighting systemsamong others, operation has largely been controlled by hydro-electric power supply [NationalGrid]. This is not much a reliable source of energy due to the persistent power failure fromour only reliable Nation Grid in the country, which has been the result of low water level inthe   dam(s)  during   hamatan   seasons,  faulty   underground   cables   and   transformer   failures.Especially, the 1997, 2006, 2007 and the 2015 the current energy crisis that is happening inGhana and such experiences are seriously estimated worldwide in the near forthcoming as aresult of unfavourable climatic change.This development therefore seeks to use inverter with the help of 12V DC battery as analternative   source   of   energy   in   the   wake   up   of   these   challenges   to   power   householdappliances.                                                 

TABLE OF CONTENTS
Abstract ………………………………………………………………………………....
Table of content………………………………………………………………………...
Acknowledgement …………………………………………………………………..…
List of Abbreviation ……………………………………………………………….…...
CHAPTER ONE ………………………………………………………………… 
INTRODUCTION TO DC/AC POWER INVERTER
1.1 Introduction                                                                                         
  1.2 Problem statement                                                                           
  1.3 Aims of the study                                                   
  1.4 Objective of the study                                          
    1.5 Significance/importance of the study                       
1.6 Limitation/scope of the study  
1.7 Tools and components used for the construction                                                               
 CHAPTER TWO…………………………………………………………………….
LITERATURE REVIEW ON A DC/AC POWER INVERTER
2.1 Background                                                                     
  2.2 Inverter and Application                                                              
 2.3Methodology                                                                                                                   
     2.3.1Block diagram of an inverter                                                    
  2.4 Sine wave generator                                                                                      
    CHAPTER THREE…………………………………………………………                             
 Methodology3.1 Introduction
3.2 Components of a DC – AC Power Inverter3.2.1 Multivibrator
3.2.2A stable multivibrator
3.2.3 Light Emitting Diode
3.2.4 Resistors
3.2.5 Capacitors3.2.6 NPN- Transistor
3.2.7 Circuit or Breadboard
3.2.8 Transformer3.2.9 Diode
3.3 Construction and connection of a DC-AC Power Inverter.
3.4 The 12V DC BatteryCHAPTER FOUR………………………………………………………………22-25
MODE OF OPERATION, SERVICING AND ANALYSIS
4.1 Circuit operation
4.2 Switching Times
4.3 Switching time against Output voltage
4.4 Servicing
CHAPTER FIVE…………………………………………………………………
CONCLUSIONS AND RECOMMENDATIONS
5.1Conclusions
5.2 RecommendationsREFERENCE…………………………………………………………………
Design and Construction of a Power Inverter
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0342
  • Access Fee: ₦5,000 ($14)
  • Pages: 36 Pages
  • Format: Microsoft Word
  • Views: 257

500
Leave a comment...

    Related Works

    ABSTRACT This project review the conformability of uninterrupted power supply through the use of power inverter, However, inverter is of different categories base on power rating such as 1KVA, 1.5KVA, 5KVA etc. Moreover, since the invention of inverter, some problem associated with alternative power supply had been drastically reduced. Meanwhile,... Continue Reading
    ABSTRACT No one form of power can sustain a nation. The ever increasing demand for electrical power has arisen from our lifestyles with revolves around electric power to speed up processes of development such as manufacturing, service provision and general well being of man. The need for the provision of quick but minute energy to prevent the... Continue Reading
    ABSTRACT No one form of power can sustain a nation. The ever increasing demand for electrical power has arisen from our lifestyles with revolves around electric power to speed up processes of development such as manufacturing, service provision and general well being of man. The need for the provision of quick but minute energy to prevent the... Continue Reading
    ABSTRACT As the name of the project implies “Power Inverter”, is an electronics system that converts DC Energy (voltage) to an AC energy.  The major aim of this project is to design and construct a 1000VA Power inverter that is capable of powering loads of equivalent ratings, in the absence of power supply from NEPA or Generator. The system... Continue Reading
    ABSTRACT As the name of the project implies “Power Inverter”, is an electronics system that converts DC Energy (voltage) to an AC energy. The major aim of this project is to design and construct a 1000VA Power inverter that is capable of powering loads of equivalent ratings, in the absence of power supply from NEPA or Generator. The system... Continue Reading
    ABSTRACT 500VA power inverter system is a DC to AC conversion system of 500VA power rating and expected to carry around 400 watts load. It provides power to electronic and electrical appliances such as radio sets, TV DVD/VCD, computers, fans and lighting. The design was conceived and put down as block diagram. Corresponding circuit diagrams for... Continue Reading
    TABLE OF CONTENTS TITLE PAGE  APPROVAL PAGE  DEDICATION  ACKNOWLEDGEMENT  ABSTRACT  TABLE OF CONTENT  CHAPTER ONE  1.0 INTRODUCTION  1.1 OBJECTIVE OF THE PROJECT 1.2 SIGNIFICANCE OF THE PROJECT 1.3    APPLICATION OF THE PROJECT 1.4 SCOPE OF THE PROJECT 1.5 LIMITATION OF THE PROJECT 1.6 PURPOSE OF THE PROJECT 1.7 PROJECT ORGANISATION... Continue Reading
    TABLE OF CONTENTS TITLE PAGE  APPROVAL PAGE  DEDICATION  ACKNOWLEDGEMENT  ABSTRACT  TABLE OF CONTENT  CHAPTER ONE  1.0INTRODUCTION  1.1 OBJECTIVE OF THE PROJECT 1.2SIGNIFICANCE OF THE PROJECT 1.3    APPLICATION OF THE PROJECT 1.4SCOPE OF THE PROJECT 1.5LIMITATION OF THE PROJECT 1.6PURPOSE OF THE PROJECT 1.7PROJECT ORGANISATION CHAPTER... Continue Reading
    ABSTRACT As new ideas unfold and technology become advanced with business increasingly being dependent on technology for their fundamental operation; the need for system availability is of paramount importance.           Uninterruptible power supply [INVERTER] maintain continuous supply of electric power to certain essential equipment... Continue Reading
    CHAPTER ONE INTRODUCTION All modern engineering system includes certain aspects of control system at some point in their broadcast scenes, control engineering and the associated theory are concerned with the means of making system to behave in a desired may.  The system on this thesis is a DC ' AC... Continue Reading
    Call Us Get this work