Design and Analysis of Wireless Nanogrid for Non-Smartphones

  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0498
  • Access Fee: ₦5,000 ($14)
  • Pages: 90 Pages
  • Format: Microsoft Word
  • Views: 196
  • Report This work

For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

ABSTRACT This research work designs a wireless power transfer system (WPT) for non smart phones as an alternative to existing wired power supply systems for these devices. Initially, the general concept of known WPT systems and methods are introduced and reviewed. It was noted that most existing WPT models do not consider external interferences in their design even though, it is well known that high frequency circuits may interfere with a WPT system. Additionally till date, existing WPT systems are designed for smart devices only. To fill in this gap, a basic magnetic induction WPT architecture was developed. It consisted of an input driver, inductively coupled transmitter and receiver and a load driver where the load is a non-smartphone. In each stage of the architecture, the efficiencies ηj−k of the power transfer process are calculated. The inductive coupling is represented by a magnetic circuit in which external interferences are modeled as series reluctances. The power flows and efficiency were obtained by Langrangian energy methods. The flexibility of the design was demonstrated by the low order of variation in the system efficiency over generalized coordinates of load rotation, displacement and impedance. Comparing the WPT system designed in this work with [9], a maximum parameter variation over rotation of 1% was obtained. Additionally, an effective range of 4.5m where [9] had a variation over rotation of 6% and a range of 1m. Finally, the research work recommended that a specific design incorporating a solar photovoltaic source is introduced to improve the stability and reliability of the wireless power supply system.

Design and Analysis of Wireless Nanogrid for Non-Smartphones
For more Info, call us on
+234 8130 686 500
or
+234 8093 423 853

Share This
  • Type: Project
  • Department: Electrical Engineering
  • Project ID: ELE0498
  • Access Fee: ₦5,000 ($14)
  • Pages: 90 Pages
  • Format: Microsoft Word
  • Views: 196

500
Leave a comment...

    Related Works

    ABSTRACT This research work designs a wireless power transfer system (WPT) for non smart phones as an alternative to existing wired power supply systems for these devices. Initially, the general concept of known WPT systems and methods are introduced and reviewed. It was noted that most existing WPT models do not consider external interferences in... Continue Reading
    The aim of this project is to shows the possibility of wireless power transfer through the design of a wireless charging pad.  In this project write-up, the methodology and principle of operation is wireless power transfer through inductive couple, a feasible design is modelled accordingly. The inductive couple technique is used because it is the... Continue Reading
    The aim of this project is to shows the possibility of wireless power transfer through the design of a wireless charging pad.  In this project write-up, the methodology and principle of operation is wireless power transfer through inductive couple, a feasible design is modelled accordingly. The inductive couple technique is used because it is the... Continue Reading
    Abstract Voting is key in maintaining the structure of society. Voting aids in making a choice in situations where there are multiple options pertaining to a decision being made. The most popular form of voting is the paper-ballot system where voters cast their votes by imprinting their fingerprints on special ballot papers. However, with the rise... Continue Reading
      ABSTRACT This project intended to simplify the description and working principle of FM wireless microphone, which works on a fixed frequency modulation (FM) band.    TABLE OF CONTENTS Approval Sheet  Title Page Dedication  Acknowledgement Abstract  CHAPTER ONE 1.0INTRODUCTION  1.1Aim and Objective of Investigation  CHAPTER TWO ... Continue Reading
    ABSTRACT This project intended to simplify the description and working principle of FM wireless microphone, which works on a fixed frequency modulation (FM) band. TABLE OF CONTENTS Approval Sheet Title Page Dedication Acknowledgement Abstract CHAPTER ONE 1.0INTRODUCTION 1.1Aim and Objective of Investigation CHAPTER TWO 2.0Transmitter... Continue Reading
    ABSTRACT This project topic “Secured Wireless Network” was carried out with a view to deploying effective security for wireless networks. The project developed a system that lets typical users easily build a highly secured wireless network. My aim is to show how user interface can be applied to provide a complete solution for securing wireless... Continue Reading
    Abstract  Consumers’ complaints of estimated bills from the Utility have risen to an alarming extent in recent years. On the other hand, Utility incurs huge losses attributing it to electric energy consumption theft among consumers. These complaints by the utility and the consumer led to the quest for a system that in addition to recording... Continue Reading
    (A CASE STUDY OF NOKIA) TABLE OF CONTENTS Title page         -       -       -       -       -       -       -      -       i Certification... Continue Reading
    ABSTRACT It has become inevitable that there would be communication and due to the inherent limitation of the human voice, the public address system came to being. A public addressP.A SYSTEMor ”“ is an electronic amplific ,amplifier and loudspeakers, used to reinforce a given... Continue Reading
    Call Us Get this work