Electrical Engineering Project Topics with Materials:

Abstract Pneumonia has been the leading cause of death among children under the age of five in subSaharan Africa, killing more children than the number of children dying from HIV/AIDS. The current methods of diagnosing pneumonia are limited by poor sensitivity and accuracy and they are also expensive. In this project, a low-cost biomedical device... Continue Reading

Abstract Following the discovery of Oil in Ghana the upstream industry of the Oil and Gas has received a jumpstart and is augmenting the older and more established midstream and downstream industry. The midstream and downstream industries involve the processes that refine, transport, and distribute oil and other crude products and as economic... Continue Reading

Abstract The leading cause of child mortality globally is prematurity. These deaths mostly occur due to unavailable or high cost of keeping babies in clinical incubators, which provide controlled environment for premature neonates. The aim of this project is to develop a cheap and portable wireless incubator for premature babies. The project... Continue Reading

ABSTRACT An Automated toll collection system is the system that helps in eliminating the heavy traffic caused in the Metropolitan countries. It is one of the flexible methods used to manage the flow of traffic in big cities of today. An Automated toll collection system is proposed, and the RFID technology is used. It is an innovative method that... Continue Reading

Abstract Music has been a mode of communication and a source of identity for many cultures, especially in Africa. The sound from the guitar is one of the many components that make up music, The electric guitar is a musical instrument, usually made up of six strings which is connected to amplifiers to produce sound. Technological advancement has... Continue Reading

Abstract More than 2.2 million Ghanaian families in rural areas depend on firewood and charcoal as fuel for cooking [1]. This high dependency is taking a toll on forest resources due to rampant deforestation. “Ghana's forest cover, which stood at 8.2 million hectares in 1900, has now been reduced to about 1.2 million hectares, with an estimated... Continue Reading

Abstract Cowpea traders find the manual sorting process of cowpeas laborious and time-consuming. Based on the volume of cowpeas and the proportion of damaged cowpeas, the process can span a time interval of about 6 hours. This project integrates the power of computer vision and convolutional neural networks to develop a solution for the cowpea... Continue Reading

Abstract Music is a very important part of the Ghanaian society and it serves many purposes. In more recent times, the guitar has been one of the most widely used melodic instruments in music production. With the invention of the effect pedal, guitarists worldwide have been able to use a wider variety of tones to produce more complex and enjoyable... Continue Reading

Abstract The increasing demand for electricity in Ghana has led to concerns about energy conservation, to reduce the rising energy costs as well as the carbon emissions produced from energy generation. Popular energy conservation methods used in Ghana include turning off devices when not in use and using Light Emitting Diode (LED) lamps in place... Continue Reading

Abstract Waste management is a raising concern faced by many nations in the world today. On the streets of major cities, it has become almost common to find waste which poses health hazards and other concerns to its communities and inhabitants. This project focuses on the use of smart systems and the Internet of Things (IOT), to provide an... Continue Reading

Abstract Human Computer Interaction now focuses more on being able to relate to human emotions. Recognizing human emotions from speech is an area that a lot of research is being done into with the rise of robots and Virtual reality. In this paper, emotion recognition from speech is done in MATLAB. Feature extraction is done based on the pitch and... Continue Reading

Abstract  This work involves the design and development of a digital signal detector which is  capable of detecting incoming and outgoing signals from mobile phones. The presence  of an activated mobile phone can be detected by this handy, pocket-size mobile signal  detector from a distance of one and a half meters, which could be used in... Continue Reading

ABSTRACT The development of any nation and its economy at large is centred on reliable and efficient power supply. Many developing nations are yet to actualise this feat, and therefore, there is need to strategize to meet the ever-rising demand for energy. Battery-based inverter systems have over the years provided additional power supply to... Continue Reading

Abstract The Ghanaian transit system poses certain challenges to users, as it usually has passengers waiting at bus stops for a bus to their destination, for an unknown amount of time because there is no means of tracking the buses. The system is also problematic as passengers usually argue with bus conductors for change, when payments are made in... Continue Reading

ABSTRACT PV modules exhibit a point at which its power is maximum; this point is called Maximum Power Point (MPP). Due to changes in weather conditions, the MPP changes and the PV module efficiency. Specifically, temperature and irradiance are the parameters that affect the solar panel characteristic properties. This project describes and... Continue Reading

ABSTRACT Imagine a five-year-old boy losing his life by being knocked down by a drunk driver who has been intoxicated with alcohol. The driver’s carelessness will cause the family of the little child so much pain, as well as lead to a significant loss of human resources in the country. Road accident according to research has been the second... Continue Reading

ABSTRACT This study presents the modelling and optimization of a Hybrid Energy System (HES) for GSM Base Transceiver Station (BTS) sites in emerging cities. The aim is to ensure reliable and cost-effective power supply, considering the availability, dynamism and viability of energy sources. Theoretical approach is applied in the modelling,... Continue Reading

 ABSTRACT  The problem of epileptic power supply and its consequences in the developing countries is a generally known issue. Worst still, the hope that it will be addressed with the deregulation of electricity Industries in recent time are being dashed by flight to top class investors due to its poor implementation. There is a need to provide... Continue Reading

ABSTRACT This project presents a 40A maximum power point tracking solar charge controller. The MPPT charge controller tries to keep the voltage and the power stable. The MPPT charge controller will harvest more power from the solar array – it will adjust its input voltage to harvest the maximum power from the solar array and then transform this... Continue Reading

ABSTRACT  This project work covers the design and construction of a robotic arm mechanically capable of 5 Degrees of Freedom. It solves the problem of automatically detecting and picking up objects placed within distances of 10-30cm round the robot base platform. It does this by using a simplified forward and inverse kinematic relation modeled in... Continue Reading

Abstract  Consumers’ complaints of estimated bills from the Utility have risen to an alarming extent in recent years. On the other hand, Utility incurs huge losses attributing it to electric energy consumption theft among consumers. These complaints by the utility and the consumer led to the quest for a system that in addition to recording... Continue Reading

ABSTRACT  The purpose of this project was to design and develop a Computer Based Testing (CBT) system in order to facilitate the process of conducting e-examinations especially in tertiary institutions. There is a growing need to find an easy and effective way to carryout continuous assessments for the increasing population of students. The CBT... Continue Reading

ABSTRACT With the growing demand for higher bandwidth multimedia services in a network domain over the past few years, Asynchronous Transfer Mode (ATM) has emerged as a fine solution. ATM provides mobility support for mobile users as they move among base stations. One of the key issues to support user mobility is the handoff. Efficient usage of... Continue Reading

 ABSTRACT    The word “vote” means to choose from a list, to elect or to determine. The main goal of voting (in a scenario involving the students of a given tertiary institution), is to come up with student-leaders of the students’ choice.Most tertiary institutions, FUTO not an exception have problems when it comes to voting. Some of the... Continue Reading

ABSTRACT    The goal of this project was to design a data logging interface using wireless network principle in order to facilitate the process of monitoring physical parameters such as temperature, pressure, humidity, e.tc in the environment. There is a growing desire to find an efficient and cost effective means to monitor these physical... Continue Reading