Chemical Engineering Project Topics with Materials:

ABSTRACT Water Purification Unit or filtration unit is designed in way that it will give a nice result. Like in our filtration, we have sand and carbon filter that were responded to separate the suspended solid particles, odour  and taste of the water, which will give a very nice filtered water at the end of the filtration. This unit has no... Continue Reading

This project study was aimed at designing, fabricating, and evaluating the performance of a double effect evaporator, which was used to evaporate sugar syrup to be used for students’ demonstration. During the course of the study, the methods that were used comprised of the material balances, energy balances, and determination of the component... Continue Reading

ABSTRACT A comparative investigation was undertaken to determine the head loss coefficients for horizontally mounted and vertically mounted orifices using a Fluid mechanics and Heat transfer trainer developed in Nigeria. Experiments were carried out observing the procedure and the discharge of the flow of water was collected to obtain the... Continue Reading

ABSTRACT   This study was carried out principally for the formulation of artist paint using available raw materials. Paint simplified is a material which may be applied to surfaces in relatively thin layers and which changes to a solid and may occur by evaporation of solvents, by chemical reaction or by combination of the two. Artist paint is the... Continue Reading

Abstract The 15 th of October has been decreed a day to focus on germs specifically. It’s the germs on our hand that are in the firing line .The world health organization estimates that 3.5 million children die from diarrhea and lower respiratory tract infections each year. That’s why global hand washing day was decreed. Sanitation of hand has... Continue Reading

ABSTRACT The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials used for the production was of local source. The major raw materials used for the production of the emulsion paint: water, titanium iv oxide, calcium carbonate, kaoline, calgon, natrosol, biocide P.V.A, ammonia,... Continue Reading

CHAPTER ONE INTRODUCTION Background of the Study Water is a limited natural resource and fundamental for life and  health  (UNWWDR,  2002). About 97.5% of all water on earth is salt water and the remaining 2.5% is fresh water. Around 70% of fresh water is frozen in... Continue Reading

ABSTRACT The two most common condenser tube problems faced by industrial users are internal tube fouling and tube failure. Fouling can have a major impact on the generating efficiency or the capacity of the condenser while the tube leaks or failure can seriously impact unit availability and reliability. Fundamental understanding of the root... Continue Reading

ABSTRACT An equipment design project was carried out to design an inverter (Bioreator) or the production of 100,00 metric tones per year of ethanol from sugar cane. An inverter is a part of process equipment used in ethanol production from sugar cane. While the rest process equipment include crusher, filter, centrifuge, fermented, distribution... Continue Reading

ABSTRACT As a result of modern development in Science and Technology, most of the large scale industrial used machine were now modernized to simple small and efficient machines. Some of these machines were either operated manually or the aid of electricity. For this reason, big metal sharpening machine was here reduced to simple term, which can be... Continue Reading

ABSTRACT The project dealt on the production of yam flour from yam chips. The yams were peeled and washed, 100grams samples coded sample A to G were subjected to two different drying conditions. Some were dried using the sun drying method while the others were dried through oven drying method kept at constant temperature of 500C, sodium... Continue Reading

ABSTRACT The effect of concentration of hydrochloric acid on hydrolysis of cellulose (saw-dust) to glucose was studied on this research project and the steps obtained to achieve this project involved treatment of saw-dust (cellulose) with different concentrations of the acid at constant temperature of 80° (350k) for 30mins. This was followed by... Continue Reading

ABSTRACT The need for effective and efficient means of oil extraction has been a concern in recent time. Hence, this study aimed at the oil extraction from Moringa oleifera seeds using the Microwave-Assisted extraction method. The extraction process was modeled using Response Surface Methodology (RSM). Also, the evaluation of Moringa oleifera oil... Continue Reading

The Crude Oil Quality Group (COQG) is sponsoring this document as an informational tool to be used by personnel in the petroleum industry. This document is intended to provide basic information on the effects that certain crude oil contaminants have on refinery operations. COQG’s goal is for this document to provide beneficial material to all... Continue Reading

The Crude Oil Quality Group (COQG) is sponsoring this document as an informational tool to be used by personnel in the petroleum industry. This document is intended to provide basic information on the effects that certain crude oil contaminants have on refinery operations. COQG’s goal is for this document to provide beneficial material to all... Continue Reading

ABSTRACT The objective of the repair and refurbishing the pilot plant temperature control equipment is to keep the apparatus in good working condition for it to be used for its various purposes. The part of the temperature control changed and new one installed. This was due to series of faults developed by the former one” Electrical accessories... Continue Reading

ABSTRACT The 20000 liters storage tank was constructed for effective storage and conservation of third with three (3) mild steel sheet of 14 gauge (2mm) thickness. The construction started by marketing out 1½ (One and half) mild steel of 2440 Mm by 113Mmusing metal meter rule and critter the already market out dimension underwent cutting with a... Continue Reading

ABSTRACT The 20000 liters storage tank was constructed for effective storage and conservation of third with three (3) mild steel sheet of 14 gauge (2mm) thickness. The construction started by marketing out 1½ (One and half) mild steel of 2440 Mm by 113Mmusing metal meter rule and critter the already market out dimension underwent cutting with a... Continue Reading

ABSTRACT The hydrocyclone is a separating device used for the separation of dust particles from air, which has no moving component parts. This mechanism can also be defined as a system of winds circulating about a center of relatively low barometric pressure and on the earths surface, blowing inward in spiral form. This project is constructed for... Continue Reading

ABSTRACT This research project is aimed at producing domestic powder and consequently, three different types of powder were produced, namely, simple face powder (pan-cake), medicated/Antiseptic powder (dristing powder). During the various production Talcum, Zinc-oxide, Perfume, Menthol, Tragasan 300 DP (Triclosan), Mineral oil and colour (brown)... Continue Reading

ABSTRACT The major aim of this project research work is to produce emulsion paint from locally sourced pigment & extenders. The materials used for the production was of local source. The major raw materials used for the production of the emulsion paint: water, titanium iv oxide, calcium carbonate, kaoline, calgon, natrosol, biocide P.V.A,... Continue Reading

ABSTRACT This research work shows us the potential benefits we may obtain from the computerization of the out-patient information system of the Hansa Clinic Enugu. The out-patient department otherwise called OPD is a place where the out-patient that is patients that receive treatment at the clinic without staying overnight, wait for the doctors to... Continue Reading

ABSTRCT The experiment was carried out to analyze comparatively coal and coconut activated carbon. The coal sample used in bituminous and with density of 1300kg 1m3 tile coconut shell was used. The coal and coconut shell was first activated using phosphoric acid. The activated coal and coconut carbons mere then used to bleach palm oil after... Continue Reading

ABSTRACT The table constructed has a horizontal top with vertical support or legs to raise it from the ground. The aim of the table constructed is for the preservation and storage of useful materials like books, files, computers, result booklets, electronics, office equipments and some vital home equipment etc. However, before the construction of... Continue Reading

INTRODUCTION The most common type of heat exchanger used in industry contains a number of parallel tubes enclosed in a shell and is thus called a shell and tube heat exchanger. These heat exchangers are employed when a process required large quantities of fluid to be heated or cooled. Due to their compact design, these heat exchangers contain a... Continue Reading